Version initiale : Activité 2 étape 2.3

Inc/stm32f1xx_it.h

@@ -0,0 +1,46 @@
+/**
+  ******************************************************************************
+  * @file    Examples_LL/GPIO/GPIO_InfiniteLedToggling/Inc/stm32f1xx_it.h
+  * @author  MCD Application Team
+  * @brief   This file contains the headers of the interrupt handlers.
+	* !! modif : include main.h enlevé
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_IT_H
+#define __STM32F1xx_IT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/inc/stm32f1xx_ll_cortex.h

@@ -0,0 +1,640 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_cortex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CORTEX LL module.
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The LL CORTEX driver contains a set of generic APIs that can be
+    used by user:
+      (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
+          functions
+      (+) Low power mode configuration (SCB register of Cortex-MCU)
+      (+) MPU API to configure and enable regions
+          (MPU services provided only on some devices)
+      (+) API to access to MCU info (CPUID register)
+      (+) API to enable fault handler (SHCSR accesses)
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_LL_CORTEX_H
+#define __STM32F1xx_LL_CORTEX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+/** @defgroup CORTEX_LL CORTEX
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
+  * @{
+  */
+#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8     0x00000000U                 /*!< AHB clock divided by 8 selected as SysTick clock source.*/
+#define LL_SYSTICK_CLKSOURCE_HCLK          SysTick_CTRL_CLKSOURCE_Msk  /*!< AHB clock selected as SysTick clock source. */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
+  * @{
+  */
+#define LL_HANDLER_FAULT_USG               SCB_SHCSR_USGFAULTENA_Msk              /*!< Usage fault */
+#define LL_HANDLER_FAULT_BUS               SCB_SHCSR_BUSFAULTENA_Msk              /*!< Bus fault */
+#define LL_HANDLER_FAULT_MEM               SCB_SHCSR_MEMFAULTENA_Msk              /*!< Memory management fault */
+/**
+  * @}
+  */
+
+#if __MPU_PRESENT
+
+/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
+  * @{
+  */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE     0x00000000U                                       /*!< Disable NMI and privileged SW access */
+#define LL_MPU_CTRL_HARDFAULT_NMI          MPU_CTRL_HFNMIENA_Msk                             /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
+#define LL_MPU_CTRL_PRIVILEGED_DEFAULT     MPU_CTRL_PRIVDEFENA_Msk                           /*!< Enable privileged software access to default memory map */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF          (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
+  * @{
+  */
+#define LL_MPU_REGION_NUMBER0              0x00U /*!< REGION Number 0 */
+#define LL_MPU_REGION_NUMBER1              0x01U /*!< REGION Number 1 */
+#define LL_MPU_REGION_NUMBER2              0x02U /*!< REGION Number 2 */
+#define LL_MPU_REGION_NUMBER3              0x03U /*!< REGION Number 3 */
+#define LL_MPU_REGION_NUMBER4              0x04U /*!< REGION Number 4 */
+#define LL_MPU_REGION_NUMBER5              0x05U /*!< REGION Number 5 */
+#define LL_MPU_REGION_NUMBER6              0x06U /*!< REGION Number 6 */
+#define LL_MPU_REGION_NUMBER7              0x07U /*!< REGION Number 7 */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
+  * @{
+  */
+#define LL_MPU_REGION_SIZE_32B             (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64B             (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128B            (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256B            (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512B            (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1KB             (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2KB             (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4KB             (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8KB             (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16KB            (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32KB            (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64KB            (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128KB           (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256KB           (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512KB           (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1MB             (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2MB             (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4MB             (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8MB             (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16MB            (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32MB            (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64MB            (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128MB           (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256MB           (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512MB           (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1GB             (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2GB             (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4GB             (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
+  * @{
+  */
+#define LL_MPU_REGION_NO_ACCESS            (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
+#define LL_MPU_REGION_PRIV_RW              (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
+#define LL_MPU_REGION_PRIV_RW_URO          (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
+#define LL_MPU_REGION_FULL_ACCESS          (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
+#define LL_MPU_REGION_PRIV_RO              (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
+#define LL_MPU_REGION_PRIV_RO_URO          (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
+  * @{
+  */
+#define LL_MPU_TEX_LEVEL0                  (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
+#define LL_MPU_TEX_LEVEL1                  (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
+#define LL_MPU_TEX_LEVEL2                  (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
+#define LL_MPU_TEX_LEVEL4                  (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
+  * @{
+  */
+#define LL_MPU_INSTRUCTION_ACCESS_ENABLE   0x00U            /*!< Instruction fetches enabled */
+#define LL_MPU_INSTRUCTION_ACCESS_DISABLE  MPU_RASR_XN_Msk  /*!< Instruction fetches disabled*/
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
+  * @{
+  */
+#define LL_MPU_ACCESS_SHAREABLE            MPU_RASR_S_Msk   /*!< Shareable memory attribute */
+#define LL_MPU_ACCESS_NOT_SHAREABLE        0x00U            /*!< Not Shareable memory attribute */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
+  * @{
+  */
+#define LL_MPU_ACCESS_CACHEABLE            MPU_RASR_C_Msk   /*!< Cacheable memory attribute */
+#define LL_MPU_ACCESS_NOT_CACHEABLE        0x00U            /*!< Not Cacheable memory attribute */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
+  * @{
+  */
+#define LL_MPU_ACCESS_BUFFERABLE           MPU_RASR_B_Msk   /*!< Bufferable memory attribute */
+#define LL_MPU_ACCESS_NOT_BUFFERABLE       0x00U            /*!< Not Bufferable memory attribute */
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+
+/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
+  * @{
+  */
+
+/**
+  * @brief  This function checks if the Systick counter flag is active or not.
+  * @note   It can be used in timeout function on application side.
+  * @rmtoll STK_CTRL     COUNTFLAG     LL_SYSTICK_IsActiveCounterFlag
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
+{
+  return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
+}
+
+/**
+  * @brief  Configures the SysTick clock source
+  * @rmtoll STK_CTRL     CLKSOURCE     LL_SYSTICK_SetClkSource
+  * @param  Source This parameter can be one of the following values:
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+  * @retval None
+  */
+__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
+{
+  if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
+  {
+    SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+  }
+  else
+  {
+    CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+  }
+}
+
+/**
+  * @brief  Get the SysTick clock source
+  * @rmtoll STK_CTRL     CLKSOURCE     LL_SYSTICK_GetClkSource
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+  */
+__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
+{
+  return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+}
+
+/**
+  * @brief  Enable SysTick exception request
+  * @rmtoll STK_CTRL     TICKINT       LL_SYSTICK_EnableIT
+  * @retval None
+  */
+__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
+{
+  SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief  Disable SysTick exception request
+  * @rmtoll STK_CTRL     TICKINT       LL_SYSTICK_DisableIT
+  * @retval None
+  */
+__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
+{
+  CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief  Checks if the SYSTICK interrupt is enabled or disabled.
+  * @rmtoll STK_CTRL     TICKINT       LL_SYSTICK_IsEnabledIT
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
+{
+  return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
+  * @{
+  */
+
+/**
+  * @brief  Processor uses sleep as its low power mode
+  * @rmtoll SCB_SCR      SLEEPDEEP     LL_LPM_EnableSleep
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableSleep(void)
+{
+  /* Clear SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+  * @brief  Processor uses deep sleep as its low power mode
+  * @rmtoll SCB_SCR      SLEEPDEEP     LL_LPM_EnableDeepSleep
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
+{
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+  * @brief  Configures sleep-on-exit when returning from Handler mode to Thread mode.
+  * @note   Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
+  *         empty main application.
+  * @rmtoll SCB_SCR      SLEEPONEXIT   LL_LPM_EnableSleepOnExit
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
+{
+  /* Set SLEEPONEXIT bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief  Do not sleep when returning to Thread mode.
+  * @rmtoll SCB_SCR      SLEEPONEXIT   LL_LPM_DisableSleepOnExit
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
+{
+  /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief  Enabled events and all interrupts, including disabled interrupts, can wakeup the
+  *         processor.
+  * @rmtoll SCB_SCR      SEVEONPEND    LL_LPM_EnableEventOnPend
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
+{
+  /* Set SEVEONPEND bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @brief  Only enabled interrupts or events can wakeup the processor, disabled interrupts are
+  *         excluded
+  * @rmtoll SCB_SCR      SEVEONPEND    LL_LPM_DisableEventOnPend
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
+{
+  /* Clear SEVEONPEND bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
+  * @{
+  */
+
+/**
+  * @brief  Enable a fault in System handler control register (SHCSR)
+  * @rmtoll SCB_SHCSR    MEMFAULTENA   LL_HANDLER_EnableFault
+  * @param  Fault This parameter can be a combination of the following values:
+  *         @arg @ref LL_HANDLER_FAULT_USG
+  *         @arg @ref LL_HANDLER_FAULT_BUS
+  *         @arg @ref LL_HANDLER_FAULT_MEM
+  * @retval None
+  */
+__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
+{
+  /* Enable the system handler fault */
+  SET_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+  * @brief  Disable a fault in System handler control register (SHCSR)
+  * @rmtoll SCB_SHCSR    MEMFAULTENA   LL_HANDLER_DisableFault
+  * @param  Fault This parameter can be a combination of the following values:
+  *         @arg @ref LL_HANDLER_FAULT_USG
+  *         @arg @ref LL_HANDLER_FAULT_BUS
+  *         @arg @ref LL_HANDLER_FAULT_MEM
+  * @retval None
+  */
+__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
+{
+  /* Disable the system handler fault */
+  CLEAR_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
+  * @{
+  */
+
+/**
+  * @brief  Get Implementer code
+  * @rmtoll SCB_CPUID    IMPLEMENTER   LL_CPUID_GetImplementer
+  * @retval Value should be equal to 0x41 for ARM
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
+}
+
+/**
+  * @brief  Get Variant number (The r value in the rnpn product revision identifier)
+  * @rmtoll SCB_CPUID    VARIANT       LL_CPUID_GetVariant
+  * @retval Value between 0 and 255 (0x1: revision 1, 0x2: revision 2)
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
+}
+
+/**
+  * @brief  Get Constant number
+  * @rmtoll SCB_CPUID    ARCHITECTURE  LL_CPUID_GetConstant
+  * @retval Value should be equal to 0xF for Cortex-M3 devices
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
+}
+
+/**
+  * @brief  Get Part number
+  * @rmtoll SCB_CPUID    PARTNO        LL_CPUID_GetParNo
+  * @retval Value should be equal to 0xC23 for Cortex-M3
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
+}
+
+/**
+  * @brief  Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
+  * @rmtoll SCB_CPUID    REVISION      LL_CPUID_GetRevision
+  * @retval Value between 0 and 255 (0x0: patch 0, 0x1: patch 1)
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
+}
+
+/**
+  * @}
+  */
+
+#if __MPU_PRESENT
+/** @defgroup CORTEX_LL_EF_MPU MPU
+  * @{
+  */
+
+/**
+  * @brief  Enable MPU with input options
+  * @rmtoll MPU_CTRL     ENABLE        LL_MPU_Enable
+  * @param  Options This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
+  *         @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
+  *         @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
+  *         @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
+{
+  /* Enable the MPU*/
+  WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
+  /* Ensure MPU settings take effects */
+  __DSB();
+  /* Sequence instruction fetches using update settings */
+  __ISB();
+}
+
+/**
+  * @brief  Disable MPU
+  * @rmtoll MPU_CTRL     ENABLE        LL_MPU_Disable
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_Disable(void)
+{
+  /* Make sure outstanding transfers are done */
+  __DMB();
+  /* Disable MPU*/
+  WRITE_REG(MPU->CTRL, 0U);
+}
+
+/**
+  * @brief  Check if MPU is enabled or not
+  * @rmtoll MPU_CTRL     ENABLE        LL_MPU_IsEnabled
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
+{
+  return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
+}
+
+/**
+  * @brief  Enable a MPU region
+  * @rmtoll MPU_RASR     ENABLE        LL_MPU_EnableRegion
+  * @param  Region This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_REGION_NUMBER0
+  *         @arg @ref LL_MPU_REGION_NUMBER1
+  *         @arg @ref LL_MPU_REGION_NUMBER2
+  *         @arg @ref LL_MPU_REGION_NUMBER3
+  *         @arg @ref LL_MPU_REGION_NUMBER4
+  *         @arg @ref LL_MPU_REGION_NUMBER5
+  *         @arg @ref LL_MPU_REGION_NUMBER6
+  *         @arg @ref LL_MPU_REGION_NUMBER7
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
+{
+  /* Set Region number */
+  WRITE_REG(MPU->RNR, Region);
+  /* Enable the MPU region */
+  SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+  * @brief  Configure and enable a region
+  * @rmtoll MPU_RNR      REGION        LL_MPU_ConfigRegion\n
+  *         MPU_RBAR     REGION        LL_MPU_ConfigRegion\n
+  *         MPU_RBAR     ADDR          LL_MPU_ConfigRegion\n
+  *         MPU_RASR     XN            LL_MPU_ConfigRegion\n
+  *         MPU_RASR     AP            LL_MPU_ConfigRegion\n
+  *         MPU_RASR     S             LL_MPU_ConfigRegion\n
+  *         MPU_RASR     C             LL_MPU_ConfigRegion\n
+  *         MPU_RASR     B             LL_MPU_ConfigRegion\n
+  *         MPU_RASR     SIZE          LL_MPU_ConfigRegion
+  * @param  Region This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_REGION_NUMBER0
+  *         @arg @ref LL_MPU_REGION_NUMBER1
+  *         @arg @ref LL_MPU_REGION_NUMBER2
+  *         @arg @ref LL_MPU_REGION_NUMBER3
+  *         @arg @ref LL_MPU_REGION_NUMBER4
+  *         @arg @ref LL_MPU_REGION_NUMBER5
+  *         @arg @ref LL_MPU_REGION_NUMBER6
+  *         @arg @ref LL_MPU_REGION_NUMBER7
+  * @param  Address Value of region base address
+  * @param  SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
+  * @param  Attributes This parameter can be a combination of the following values:
+  *         @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
+  *           or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
+  *           or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
+  *           or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
+  *           or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
+  *           or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
+  *         @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
+  *           or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
+  *         @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
+  *         @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or  @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
+  *         @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
+  *         @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
+  *         @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
+{
+  /* Set Region number */
+  WRITE_REG(MPU->RNR, Region);
+  /* Set base address */
+  WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
+  /* Configure MPU */
+  WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos));
+}
+
+/**
+  * @brief  Disable a region
+  * @rmtoll MPU_RNR      REGION        LL_MPU_DisableRegion\n
+  *         MPU_RASR     ENABLE        LL_MPU_DisableRegion
+  * @param  Region This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_REGION_NUMBER0
+  *         @arg @ref LL_MPU_REGION_NUMBER1
+  *         @arg @ref LL_MPU_REGION_NUMBER2
+  *         @arg @ref LL_MPU_REGION_NUMBER3
+  *         @arg @ref LL_MPU_REGION_NUMBER4
+  *         @arg @ref LL_MPU_REGION_NUMBER5
+  *         @arg @ref LL_MPU_REGION_NUMBER6
+  *         @arg @ref LL_MPU_REGION_NUMBER7
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
+{
+  /* Set Region number */
+  WRITE_REG(MPU->RNR, Region);
+  /* Disable the MPU region */
+  CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+  * @}
+  */
+
+#endif /* __MPU_PRESENT */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_LL_CORTEX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/inc/stm32f1xx_ll_crc.h

@@ -0,0 +1,204 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_crc.h
+  * @author  MCD Application Team
+  * @brief   Header file of CRC LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_LL_CRC_H
+#define STM32F1xx_LL_CRC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined(CRC)
+
+/** @defgroup CRC_LL CRC
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros
+  * @{
+  */
+
+/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros
+  * @{
+  */
+
+/**
+  * @brief  Write a value in CRC register
+  * @param  __INSTANCE__ CRC Instance
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__)
+
+/**
+  * @brief  Read a value in CRC register
+  * @param  __INSTANCE__ CRC Instance
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions
+  * @{
+  */
+
+/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions
+  * @{
+  */
+
+/**
+  * @brief  Reset the CRC calculation unit.
+  * @note   If Programmable Initial CRC value feature
+  *         is available, also set the Data Register to the value stored in the
+  *         CRC_INIT register, otherwise, reset Data Register to its default value.
+  * @rmtoll CR           RESET         LL_CRC_ResetCRCCalculationUnit
+  * @param  CRCx CRC Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx)
+{
+  SET_BIT(CRCx->CR, CRC_CR_RESET);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_LL_EF_Data_Management Data_Management
+  * @{
+  */
+
+/**
+  * @brief  Write given 32-bit data to the CRC calculator
+  * @rmtoll DR           DR            LL_CRC_FeedData32
+  * @param  CRCx CRC Instance
+  * @param  InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData)
+{
+  WRITE_REG(CRCx->DR, InData);
+}
+
+/**
+  * @brief  Return current CRC calculation result. 32 bits value is returned.
+  * @rmtoll DR           DR            LL_CRC_ReadData32
+  * @param  CRCx CRC Instance
+  * @retval Current CRC calculation result as stored in CRC_DR register (32 bits).
+  */
+__STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx)
+{
+  return (uint32_t)(READ_REG(CRCx->DR));
+}
+
+/**
+  * @brief  Return data stored in the Independent Data(IDR) register.
+  * @note   This register can be used as a temporary storage location for one byte.
+  * @rmtoll IDR          IDR           LL_CRC_Read_IDR
+  * @param  CRCx CRC Instance
+  * @retval Value stored in CRC_IDR register (General-purpose 8-bit data register).
+  */
+__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx)
+{
+  return (uint32_t)(READ_REG(CRCx->IDR));
+}
+
+/**
+  * @brief  Store data in the Independent Data(IDR) register.
+  * @note   This register can be used as a temporary storage location for one byte.
+  * @rmtoll IDR          IDR           LL_CRC_Write_IDR
+  * @param  CRCx CRC Instance
+  * @param  InData value to be stored in CRC_IDR register (8-bit) between Min_Data=0 and Max_Data=0xFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData)
+{
+  *((uint8_t __IO *)(&CRCx->IDR)) = (uint8_t) InData;
+}
+/**
+  * @}
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions
+  * @{
+  */
+
+ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx);
+
+/**
+  * @}
+  */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined(CRC) */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_LL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/inc/stm32f1xx_ll_exti.h

@@ -0,0 +1,888 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_exti.h
+  * @author  MCD Application Team
+  * @brief   Header file of EXTI LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_LL_EXTI_H
+#define STM32F1xx_LL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (EXTI)
+
+/** @defgroup EXTI_LL EXTI
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private Macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
+  * @{
+  */
+/**
+  * @}
+  */
+#endif /*USE_FULL_LL_DRIVER*/
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
+  * @{
+  */
+typedef struct
+{
+
+  uint32_t Line_0_31;           /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
+                                     This parameter can be any combination of @ref EXTI_LL_EC_LINE */
+
+  FunctionalState LineCommand;  /*!< Specifies the new state of the selected EXTI lines.
+                                     This parameter can be set either to ENABLE or DISABLE */
+
+  uint8_t Mode;                 /*!< Specifies the mode for the EXTI lines.
+                                     This parameter can be a value of @ref EXTI_LL_EC_MODE. */
+
+  uint8_t Trigger;              /*!< Specifies the trigger signal active edge for the EXTI lines.
+                                     This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
+} LL_EXTI_InitTypeDef;
+
+/**
+  * @}
+  */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
+  * @{
+  */
+
+/** @defgroup EXTI_LL_EC_LINE LINE
+  * @{
+  */
+#define LL_EXTI_LINE_0                 EXTI_IMR_IM0           /*!< Extended line 0 */
+#define LL_EXTI_LINE_1                 EXTI_IMR_IM1           /*!< Extended line 1 */
+#define LL_EXTI_LINE_2                 EXTI_IMR_IM2           /*!< Extended line 2 */
+#define LL_EXTI_LINE_3                 EXTI_IMR_IM3           /*!< Extended line 3 */
+#define LL_EXTI_LINE_4                 EXTI_IMR_IM4           /*!< Extended line 4 */
+#define LL_EXTI_LINE_5                 EXTI_IMR_IM5           /*!< Extended line 5 */
+#define LL_EXTI_LINE_6                 EXTI_IMR_IM6           /*!< Extended line 6 */
+#define LL_EXTI_LINE_7                 EXTI_IMR_IM7           /*!< Extended line 7 */
+#define LL_EXTI_LINE_8                 EXTI_IMR_IM8           /*!< Extended line 8 */
+#define LL_EXTI_LINE_9                 EXTI_IMR_IM9           /*!< Extended line 9 */
+#define LL_EXTI_LINE_10                EXTI_IMR_IM10          /*!< Extended line 10 */
+#define LL_EXTI_LINE_11                EXTI_IMR_IM11          /*!< Extended line 11 */
+#define LL_EXTI_LINE_12                EXTI_IMR_IM12          /*!< Extended line 12 */
+#define LL_EXTI_LINE_13                EXTI_IMR_IM13          /*!< Extended line 13 */
+#define LL_EXTI_LINE_14                EXTI_IMR_IM14          /*!< Extended line 14 */
+#define LL_EXTI_LINE_15                EXTI_IMR_IM15          /*!< Extended line 15 */
+#if defined(EXTI_IMR_IM16)
+#define LL_EXTI_LINE_16                EXTI_IMR_IM16          /*!< Extended line 16 */
+#endif
+#define LL_EXTI_LINE_17                EXTI_IMR_IM17          /*!< Extended line 17 */
+#if defined(EXTI_IMR_IM18)
+#define LL_EXTI_LINE_18                EXTI_IMR_IM18          /*!< Extended line 18 */
+#endif
+#if defined(EXTI_IMR_IM19)
+#define LL_EXTI_LINE_19                EXTI_IMR_IM19          /*!< Extended line 19 */
+#endif
+#if defined(EXTI_IMR_IM20)
+#define LL_EXTI_LINE_20                EXTI_IMR_IM20          /*!< Extended line 20 */
+#endif
+#if defined(EXTI_IMR_IM21)
+#define LL_EXTI_LINE_21                EXTI_IMR_IM21          /*!< Extended line 21 */
+#endif
+#if defined(EXTI_IMR_IM22)
+#define LL_EXTI_LINE_22                EXTI_IMR_IM22          /*!< Extended line 22 */
+#endif
+#if defined(EXTI_IMR_IM23)
+#define LL_EXTI_LINE_23                EXTI_IMR_IM23          /*!< Extended line 23 */
+#endif
+#if defined(EXTI_IMR_IM24)
+#define LL_EXTI_LINE_24                EXTI_IMR_IM24          /*!< Extended line 24 */
+#endif
+#if defined(EXTI_IMR_IM25)
+#define LL_EXTI_LINE_25                EXTI_IMR_IM25          /*!< Extended line 25 */
+#endif
+#if defined(EXTI_IMR_IM26)
+#define LL_EXTI_LINE_26                EXTI_IMR_IM26          /*!< Extended line 26 */
+#endif
+#if defined(EXTI_IMR_IM27)
+#define LL_EXTI_LINE_27                EXTI_IMR_IM27          /*!< Extended line 27 */
+#endif
+#if defined(EXTI_IMR_IM28)
+#define LL_EXTI_LINE_28                EXTI_IMR_IM28          /*!< Extended line 28 */
+#endif
+#if defined(EXTI_IMR_IM29)
+#define LL_EXTI_LINE_29                EXTI_IMR_IM29          /*!< Extended line 29 */
+#endif
+#if defined(EXTI_IMR_IM30)
+#define LL_EXTI_LINE_30                EXTI_IMR_IM30          /*!< Extended line 30 */
+#endif
+#if defined(EXTI_IMR_IM31)
+#define LL_EXTI_LINE_31                EXTI_IMR_IM31          /*!< Extended line 31 */
+#endif
+#define LL_EXTI_LINE_ALL_0_31          EXTI_IMR_IM            /*!< All Extended line not reserved*/
+
+
+#define LL_EXTI_LINE_ALL               (0xFFFFFFFFU)  /*!< All Extended line */
+
+#if defined(USE_FULL_LL_DRIVER)
+#define LL_EXTI_LINE_NONE              (0x00000000U)  /*!< None Extended line */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/**
+  * @}
+  */
+#if defined(USE_FULL_LL_DRIVER)
+
+/** @defgroup EXTI_LL_EC_MODE Mode
+  * @{
+  */
+#define LL_EXTI_MODE_IT                 ((uint8_t)0x00) /*!< Interrupt Mode */
+#define LL_EXTI_MODE_EVENT              ((uint8_t)0x01) /*!< Event Mode */
+#define LL_EXTI_MODE_IT_EVENT           ((uint8_t)0x02) /*!< Interrupt & Event Mode */
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
+  * @{
+  */
+#define LL_EXTI_TRIGGER_NONE            ((uint8_t)0x00) /*!< No Trigger Mode */
+#define LL_EXTI_TRIGGER_RISING          ((uint8_t)0x01) /*!< Trigger Rising Mode */
+#define LL_EXTI_TRIGGER_FALLING         ((uint8_t)0x02) /*!< Trigger Falling Mode */
+#define LL_EXTI_TRIGGER_RISING_FALLING  ((uint8_t)0x03) /*!< Trigger Rising & Falling Mode */
+
+/**
+  * @}
+  */
+
+
+#endif /*USE_FULL_LL_DRIVER*/
+
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
+  * @{
+  */
+
+/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
+  * @{
+  */
+
+/**
+  * @brief  Write a value in EXTI register
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in EXTI register
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
+ * @{
+ */
+/** @defgroup EXTI_LL_EF_IT_Management IT_Management
+  * @{
+  */
+
+/**
+  * @brief  Enable ExtiLine Interrupt request for Lines in range 0 to 31
+  * @note The reset value for the direct or internal lines (see RM)
+  *       is set to 1 in order to enable the interrupt by default.
+  *       Bits are set automatically at Power on.
+  * @rmtoll IMR         IMx           LL_EXTI_EnableIT_0_31
+  * @param  ExtiLine This parameter can be one of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_17
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  *         @arg @ref LL_EXTI_LINE_ALL_0_31
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
+{
+  SET_BIT(EXTI->IMR, ExtiLine);
+}
+
+/**
+  * @brief  Disable ExtiLine Interrupt request for Lines in range 0 to 31
+  * @note The reset value for the direct or internal lines (see RM)
+  *       is set to 1 in order to enable the interrupt by default.
+  *       Bits are set automatically at Power on.
+  * @rmtoll IMR         IMx           LL_EXTI_DisableIT_0_31
+  * @param  ExtiLine This parameter can be one of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_17
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  *         @arg @ref LL_EXTI_LINE_ALL_0_31
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
+{
+  CLEAR_BIT(EXTI->IMR, ExtiLine);
+}
+
+
+/**
+  * @brief  Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
+  * @note The reset value for the direct or internal lines (see RM)
+  *       is set to 1 in order to enable the interrupt by default.
+  *       Bits are set automatically at Power on.
+  * @rmtoll IMR         IMx           LL_EXTI_IsEnabledIT_0_31
+  * @param  ExtiLine This parameter can be one of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_17
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  *         @arg @ref LL_EXTI_LINE_ALL_0_31
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
+{
+  return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_LL_EF_Event_Management Event_Management
+  * @{
+  */
+
+/**
+  * @brief  Enable ExtiLine Event request for Lines in range 0 to 31
+  * @rmtoll EMR         EMx           LL_EXTI_EnableEvent_0_31
+  * @param  ExtiLine This parameter can be one of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_17
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  *         @arg @ref LL_EXTI_LINE_ALL_0_31
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
+{
+  SET_BIT(EXTI->EMR, ExtiLine);
+
+}
+
+
+/**
+  * @brief  Disable ExtiLine Event request for Lines in range 0 to 31
+  * @rmtoll EMR         EMx           LL_EXTI_DisableEvent_0_31
+  * @param  ExtiLine This parameter can be one of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_17
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  *         @arg @ref LL_EXTI_LINE_ALL_0_31
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
+{
+  CLEAR_BIT(EXTI->EMR, ExtiLine);
+}
+
+
+/**
+  * @brief  Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
+  * @rmtoll EMR         EMx           LL_EXTI_IsEnabledEvent_0_31
+  * @param  ExtiLine This parameter can be one of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_17
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  *         @arg @ref LL_EXTI_LINE_ALL_0_31
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
+{
+  return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
+
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
+  * @{
+  */
+
+/**
+  * @brief  Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
+  * @note The configurable wakeup lines are edge-triggered. No glitch must be
+  *       generated on these lines. If a rising edge on a configurable interrupt
+  *       line occurs during a write operation in the EXTI_RTSR register, the
+  *       pending bit is not set.
+  *       Rising and falling edge triggers can be set for
+  *       the same interrupt line. In this case, both generate a trigger
+  *       condition.
+  * @rmtoll RTSR        RTx           LL_EXTI_EnableRisingTrig_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
+{
+  SET_BIT(EXTI->RTSR, ExtiLine);
+
+}
+
+
+/**
+  * @brief  Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
+  * @note The configurable wakeup lines are edge-triggered. No glitch must be
+  *       generated on these lines. If a rising edge on a configurable interrupt
+  *       line occurs during a write operation in the EXTI_RTSR register, the
+  *       pending bit is not set.
+  *       Rising and falling edge triggers can be set for
+  *       the same interrupt line. In this case, both generate a trigger
+  *       condition.
+  * @rmtoll RTSR        RTx           LL_EXTI_DisableRisingTrig_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
+{
+  CLEAR_BIT(EXTI->RTSR, ExtiLine);
+
+}
+
+
+/**
+  * @brief  Check if rising edge trigger is enabled for Lines in range 0 to 31
+  * @rmtoll RTSR        RTx           LL_EXTI_IsEnabledRisingTrig_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
+{
+  return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
+  * @{
+  */
+
+/**
+  * @brief  Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
+  * @note The configurable wakeup lines are edge-triggered. No glitch must be
+  *       generated on these lines. If a falling edge on a configurable interrupt
+  *       line occurs during a write operation in the EXTI_FTSR register, the
+  *       pending bit is not set.
+  *       Rising and falling edge triggers can be set for
+  *       the same interrupt line. In this case, both generate a trigger
+  *       condition.
+  * @rmtoll FTSR        FTx           LL_EXTI_EnableFallingTrig_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
+{
+  SET_BIT(EXTI->FTSR, ExtiLine);
+}
+
+
+/**
+  * @brief  Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
+  * @note The configurable wakeup lines are edge-triggered. No glitch must be
+  *       generated on these lines. If a Falling edge on a configurable interrupt
+  *       line occurs during a write operation in the EXTI_FTSR register, the
+  *       pending bit is not set.
+  *       Rising and falling edge triggers can be set for the same interrupt line.
+  *       In this case, both generate a trigger condition.
+  * @rmtoll FTSR        FTx           LL_EXTI_DisableFallingTrig_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
+{
+  CLEAR_BIT(EXTI->FTSR, ExtiLine);
+}
+
+
+/**
+  * @brief  Check if falling edge trigger is enabled for Lines in range 0 to 31
+  * @rmtoll FTSR        FTx           LL_EXTI_IsEnabledFallingTrig_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
+{
+  return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
+  * @{
+  */
+
+/**
+  * @brief  Generate a software Interrupt Event for Lines in range 0 to 31
+  * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
+  *       this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
+  *       resulting in an interrupt request generation.
+  *       This bit is cleared by clearing the corresponding bit in the EXTI_PR
+  *       register (by writing a 1 into the bit)
+  * @rmtoll SWIER       SWIx          LL_EXTI_GenerateSWI_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
+{
+  SET_BIT(EXTI->SWIER, ExtiLine);
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
+  * @{
+  */
+
+/**
+  * @brief  Check if the ExtLine Flag is set or not for Lines in range 0 to 31
+  * @note This bit is set when the selected edge event arrives on the interrupt
+  *       line. This bit is cleared by writing a 1 to the bit.
+  * @rmtoll PR          PIFx           LL_EXTI_IsActiveFlag_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
+{
+  return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+  * @brief  Read ExtLine Combination Flag for Lines in range 0 to 31
+  * @note This bit is set when the selected edge event arrives on the interrupt
+  *       line. This bit is cleared by writing a 1 to the bit.
+  * @rmtoll PR          PIFx           LL_EXTI_ReadFlag_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval @note This bit is set when the selected edge event arrives on the interrupt
+  */
+__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
+{
+  return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine));
+}
+
+
+/**
+  * @brief  Clear ExtLine Flags  for Lines in range 0 to 31
+  * @note This bit is set when the selected edge event arrives on the interrupt
+  *       line. This bit is cleared by writing a 1 to the bit.
+  * @rmtoll PR          PIFx           LL_EXTI_ClearFlag_0_31
+  * @param  ExtiLine This parameter can be a combination of the following values:
+  *         @arg @ref LL_EXTI_LINE_0
+  *         @arg @ref LL_EXTI_LINE_1
+  *         @arg @ref LL_EXTI_LINE_2
+  *         @arg @ref LL_EXTI_LINE_3
+  *         @arg @ref LL_EXTI_LINE_4
+  *         @arg @ref LL_EXTI_LINE_5
+  *         @arg @ref LL_EXTI_LINE_6
+  *         @arg @ref LL_EXTI_LINE_7
+  *         @arg @ref LL_EXTI_LINE_8
+  *         @arg @ref LL_EXTI_LINE_9
+  *         @arg @ref LL_EXTI_LINE_10
+  *         @arg @ref LL_EXTI_LINE_11
+  *         @arg @ref LL_EXTI_LINE_12
+  *         @arg @ref LL_EXTI_LINE_13
+  *         @arg @ref LL_EXTI_LINE_14
+  *         @arg @ref LL_EXTI_LINE_15
+  *         @arg @ref LL_EXTI_LINE_16
+  *         @arg @ref LL_EXTI_LINE_18
+  *         @arg @ref LL_EXTI_LINE_19
+  * @note   Please check each device line mapping for EXTI Line availability
+  * @retval None
+  */
+__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
+{
+  WRITE_REG(EXTI->PR, ExtiLine);
+}
+
+
+/**
+  * @}
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
+  * @{
+  */
+
+uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
+uint32_t LL_EXTI_DeInit(void);
+void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
+
+
+/**
+  * @}
+  */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* EXTI */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_LL_EXTI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/inc/stm32f1xx_ll_fsmc.h

@@ -0,0 +1,951 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_fsmc.h
+  * @author  MCD Application Team
+  * @brief   Header file of FSMC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_LL_FSMC_H
+#define STM32F1xx_LL_FSMC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FSMC_LL
+  * @{
+  */
+
+/** @addtogroup FSMC_LL_Private_Macros
+  * @{
+  */
+#if defined FSMC_BANK1
+
+#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \
+                                       ((__BANK__) == FSMC_NORSRAM_BANK2) || \
+                                       ((__BANK__) == FSMC_NORSRAM_BANK3) || \
+                                       ((__BANK__) == FSMC_NORSRAM_BANK4))
+#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \
+                             ((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE))
+#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \
+                                   ((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \
+                                   ((__MEMORY__) == FSMC_MEMORY_TYPE_NOR))
+#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8)  || \
+                                                ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+                                                ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32))
+#define IS_FSMC_PAGESIZE(__SIZE__) (((__SIZE__) == FSMC_PAGE_SIZE_NONE) || \
+                                   ((__SIZE__) == FSMC_PAGE_SIZE_128) || \
+                                   ((__SIZE__) == FSMC_PAGE_SIZE_256) || \
+                                   ((__SIZE__) == FSMC_PAGE_SIZE_512) || \
+                                   ((__SIZE__) == FSMC_PAGE_SIZE_1024))
+#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \
+                                      ((__MODE__) == FSMC_ACCESS_MODE_B) || \
+                                      ((__MODE__) == FSMC_ACCESS_MODE_C) || \
+                                      ((__MODE__) == FSMC_ACCESS_MODE_D))
+#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \
+                                     ((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE))
+#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \
+                                            ((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH))
+#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \
+                                     ((__MODE__) == FSMC_WRAP_MODE_ENABLE))     
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \
+                                               ((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS))
+#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \
+                                               ((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE))
+#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \
+                                         ((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE))
+#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \
+                                        ((__MODE__) == FSMC_EXTENDED_MODE_ENABLE))
+#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+                                    ((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE))
+#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U))
+#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \
+                                       ((__BURST__) == FSMC_WRITE_BURST_ENABLE))
+#define IS_FSMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+                                            ((__CCLOCK__) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U)
+#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U))
+#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U))
+#define IS_FSMC_DATAHOLD_DURATION(__DATAHOLD__) ((__DATAHOLD__) <= 3U)
+#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U)
+#define IS_FSMC_CLK_DIV(__DIV__) (((__DIV__) > 1U) && ((__DIV__) <= 16U))
+#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE)
+#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE)
+
+#endif /* FSMC_BANK1 */
+#if defined(FSMC_BANK3)
+
+#define IS_FSMC_NAND_BANK(__BANK__) ((__BANK__) == FSMC_NAND_BANK3)
+#define IS_FSMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+                                          ((__FEATURE__) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+#define IS_FSMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+                                             ((__WIDTH__) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16))
+#define IS_FSMC_ECC_STATE(__STATE__) (((__STATE__) == FSMC_NAND_ECC_DISABLE) || \
+                                     ((__STATE__) == FSMC_NAND_ECC_ENABLE))
+
+#define IS_FSMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE)  || \
+                                       ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE)  || \
+                                       ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+                                       ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+                                       ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+                                       ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+#define IS_FSMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255U)
+#define IS_FSMC_TAR_TIME(__TIME__) ((__TIME__) <= 255U)
+#define IS_FSMC_SETUP_TIME(__TIME__) ((__TIME__) <= 254U)
+#define IS_FSMC_WAIT_TIME(__TIME__) ((__TIME__) <= 254U)
+#define IS_FSMC_HOLD_TIME(__TIME__) ((__TIME__) <= 254U)
+#define IS_FSMC_HIZ_TIME(__TIME__) ((__TIME__) <= 254U)
+#define IS_FSMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NAND_DEVICE)
+
+#endif /* FSMC_BANK3 */
+#if defined(FSMC_BANK4)
+#define IS_FSMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_PCCARD_DEVICE)
+
+#endif /* FSMC_BANK4 */
+
+/**
+  * @}
+  */
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/** @defgroup FSMC_LL_Exported_typedef FSMC Low Layer Exported Types
+  * @{
+  */
+
+#if defined FSMC_BANK1
+#define FSMC_NORSRAM_TypeDef            FSMC_Bank1_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TypeDef   FSMC_Bank1E_TypeDef
+#endif /* FSMC_BANK1 */
+#if defined(FSMC_BANK3)
+#define FSMC_NAND_TypeDef               FSMC_Bank2_3_TypeDef
+#endif /* FSMC_BANK3 */
+#if defined(FSMC_BANK4)
+#define FSMC_PCCARD_TypeDef             FSMC_Bank4_TypeDef
+#endif /* FSMC_BANK4 */
+
+#if defined FSMC_BANK1
+#define FSMC_NORSRAM_DEVICE             FSMC_Bank1
+#define FSMC_NORSRAM_EXTENDED_DEVICE    FSMC_Bank1E
+#endif /* FSMC_BANK1 */
+#if defined(FSMC_BANK3)
+#define FSMC_NAND_DEVICE                FSMC_Bank2_3
+#endif /* FSMC_BANK3 */
+#if defined(FSMC_BANK4)
+#define FSMC_PCCARD_DEVICE              FSMC_Bank4
+#endif /* FSMC_BANK4 */
+
+#if defined FSMC_BANK1
+/**
+  * @brief  FSMC NORSRAM Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t NSBank;                       /*!< Specifies the NORSRAM memory device that will be used.
+                                              This parameter can be a value of @ref FSMC_NORSRAM_Bank                     */
+
+  uint32_t DataAddressMux;               /*!< Specifies whether the address and data values are
+                                              multiplexed on the data bus or not.
+                                              This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing    */
+
+  uint32_t MemoryType;                   /*!< Specifies the type of external memory attached to
+                                              the corresponding memory device.
+                                              This parameter can be a value of @ref FSMC_Memory_Type                      */
+
+  uint32_t MemoryDataWidth;              /*!< Specifies the external memory device width.
+                                              This parameter can be a value of @ref FSMC_NORSRAM_Data_Width               */
+
+  uint32_t BurstAccessMode;              /*!< Enables or disables the burst access mode for Flash memory,
+                                              valid only with synchronous burst Flash memories.
+                                              This parameter can be a value of @ref FSMC_Burst_Access_Mode                */
+
+  uint32_t WaitSignalPolarity;           /*!< Specifies the wait signal polarity, valid only when accessing
+                                              the Flash memory in burst mode.
+                                              This parameter can be a value of @ref FSMC_Wait_Signal_Polarity             */
+
+  uint32_t WrapMode;                     /*!< Enables or disables the Wrapped burst access mode for Flash
+                                              memory, valid only when accessing Flash memories in burst mode.
+                                              This parameter can be a value of @ref FSMC_Wrap_Mode                        */
+
+  uint32_t WaitSignalActive;             /*!< Specifies if the wait signal is asserted by the memory one
+                                              clock cycle before the wait state or during the wait state,
+                                              valid only when accessing memories in burst mode.
+                                              This parameter can be a value of @ref FSMC_Wait_Timing                      */
+
+  uint32_t WriteOperation;               /*!< Enables or disables the write operation in the selected device by the FSMC.
+                                              This parameter can be a value of @ref FSMC_Write_Operation                  */
+
+  uint32_t WaitSignal;                   /*!< Enables or disables the wait state insertion via wait
+                                              signal, valid for Flash memory access in burst mode.
+                                              This parameter can be a value of @ref FSMC_Wait_Signal                      */
+
+  uint32_t ExtendedMode;                 /*!< Enables or disables the extended mode.
+                                              This parameter can be a value of @ref FSMC_Extended_Mode                    */
+
+  uint32_t AsynchronousWait;             /*!< Enables or disables wait signal during asynchronous transfers,
+                                              valid only with asynchronous Flash memories.
+                                              This parameter can be a value of @ref FSMC_AsynchronousWait                 */
+
+  uint32_t WriteBurst;                   /*!< Enables or disables the write burst operation.
+                                              This parameter can be a value of @ref FSMC_Write_Burst                      */
+
+
+  uint32_t PageSize;                     /*!< Specifies the memory page size.
+                                              This parameter can be a value of @ref FSMC_Page_Size                        */
+}FSMC_NORSRAM_InitTypeDef;
+
+/**
+  * @brief  FSMC NORSRAM Timing parameters structure definition
+  */
+typedef struct
+{
+  uint32_t AddressSetupTime;             /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the address setup time.
+                                              This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+                                              @note This parameter is not used with synchronous NOR Flash memories.      */
+
+  uint32_t AddressHoldTime;              /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the address hold time.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+                                              @note This parameter is not used with synchronous NOR Flash memories.      */
+
+  uint32_t DataSetupTime;                /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the data setup time.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+                                              @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+                                              NOR Flash memories.                                                        */
+
+  uint32_t BusTurnAroundDuration;        /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the bus turnaround.
+                                              This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+                                              @note This parameter is only used for multiplexed NOR Flash memories.      */
+
+  uint32_t CLKDivision;                  /*!< Defines the period of CLK clock output signal, expressed in number of
+                                              HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+                                              @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+                                              accesses.                                                                  */
+
+  uint32_t DataLatency;                  /*!< Defines the number of memory clock cycles to issue
+                                              to the memory before getting the first data.
+                                              The parameter value depends on the memory type as shown below:
+                                              - It must be set to 0 in case of a CRAM
+                                              - It is don't care in asynchronous NOR, SRAM or ROM accesses
+                                              - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+                                                with synchronous burst mode enable                                       */
+
+  uint32_t AccessMode;                   /*!< Specifies the asynchronous access mode.
+                                              This parameter can be a value of @ref FSMC_Access_Mode                      */
+}FSMC_NORSRAM_TimingTypeDef;
+#endif /* FSMC_BANK1 */
+
+#if defined(FSMC_BANK3)
+/**
+  * @brief  FSMC NAND Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t NandBank;               /*!< Specifies the NAND memory device that will be used.
+                                        This parameter can be a value of @ref FSMC_NAND_Bank                    */
+
+  uint32_t Waitfeature;            /*!< Enables or disables the Wait feature for the NAND Memory device.
+                                        This parameter can be any value of @ref FSMC_Wait_feature               */
+
+  uint32_t MemoryDataWidth;        /*!< Specifies the external memory device width.
+                                        This parameter can be any value of @ref FSMC_NAND_Data_Width            */
+
+  uint32_t EccComputation;         /*!< Enables or disables the ECC computation.
+                                        This parameter can be any value of @ref FSMC_ECC                        */
+
+  uint32_t ECCPageSize;            /*!< Defines the page size for the extended ECC.
+                                        This parameter can be any value of @ref FSMC_ECC_Page_Size              */
+
+  uint32_t TCLRSetupTime;          /*!< Defines the number of HCLK cycles to configure the
+                                        delay between CLE low and RE low.
+                                        This parameter can be a value between Min_Data = 0 and Max_Data = 255  */
+
+  uint32_t TARSetupTime;           /*!< Defines the number of HCLK cycles to configure the
+                                        delay between ALE low and RE low.
+                                        This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FSMC_NAND_InitTypeDef;
+#endif
+
+#if defined(FSMC_BANK3)||defined(FSMC_BANK4)
+/**
+  * @brief  FSMC NAND Timing parameters structure definition
+  */
+typedef struct
+{
+  uint32_t SetupTime;            /*!< Defines the number of HCLK cycles to setup address before
+                                      the command assertion for NAND-Flash read or write access
+                                      to common/Attribute or I/O memory space (depending on
+                                      the memory space timing to be configured).
+                                      This parameter can be a value between Min_Data = 0 and Max_Data = 254    */
+
+  uint32_t WaitSetupTime;        /*!< Defines the minimum number of HCLK cycles to assert the
+                                      command for NAND-Flash read or write access to
+                                      common/Attribute or I/O memory space (depending on the
+                                      memory space timing to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 254   */
+
+  uint32_t HoldSetupTime;        /*!< Defines the number of HCLK clock cycles to hold address
+                                      (and data for write access) after the command de-assertion
+                                      for NAND-Flash read or write access to common/Attribute
+                                      or I/O memory space (depending on the memory space timing
+                                      to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 254   */
+
+  uint32_t HiZSetupTime;         /*!< Defines the number of HCLK clock cycles during which the
+                                      data bus is kept in HiZ after the start of a NAND-Flash
+                                      write access to common/Attribute or I/O memory space (depending
+                                      on the memory space timing to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 254   */
+}FSMC_NAND_PCC_TimingTypeDef;
+#endif /* FSMC_BANK3 */
+
+#if defined(FSMC_BANK4)
+/** 
+  * @brief FSMC PCCARD Configuration Structure definition
+  */ 
+typedef struct
+{
+  uint32_t Waitfeature;            /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+                                        This parameter can be any value of @ref FSMC_Wait_feature      */
+
+  uint32_t TCLRSetupTime;          /*!< Defines the number of HCLK cycles to configure the
+                                        delay between CLE low and RE low.
+                                        This parameter can be a value between Min_Data = 0 and Max_Data = 255  */
+
+  uint32_t TARSetupTime;           /*!< Defines the number of HCLK cycles to configure the
+                                        delay between ALE low and RE low.
+                                        This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FSMC_PCCARD_InitTypeDef;
+#endif
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @addtogroup FSMC_LL_Exported_Constants FSMC Low Layer Exported Constants
+  * @{
+  */
+#if defined FSMC_BANK1
+
+/** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller
+  * @{
+  */
+
+/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank
+  * @{
+  */
+#define FSMC_NORSRAM_BANK1                       ((uint32_t)0x00000000U)
+#define FSMC_NORSRAM_BANK2                       ((uint32_t)0x00000002U)
+#define FSMC_NORSRAM_BANK3                       ((uint32_t)0x00000004U)
+#define FSMC_NORSRAM_BANK4                       ((uint32_t)0x00000006U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing
+  * @{
+  */
+#define FSMC_DATA_ADDRESS_MUX_DISABLE            ((uint32_t)0x00000000U)
+#define FSMC_DATA_ADDRESS_MUX_ENABLE             ((uint32_t)0x00000002U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Memory_Type FSMC Memory Type
+  * @{
+  */
+#define FSMC_MEMORY_TYPE_SRAM                    ((uint32_t)0x00000000U)
+#define FSMC_MEMORY_TYPE_PSRAM                   ((uint32_t)0x00000004U)
+#define FSMC_MEMORY_TYPE_NOR                     ((uint32_t)0x00000008U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_NORSRAM_Data_Width FSMC NORSRAM Data Width
+  * @{
+  */
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_8             ((uint32_t)0x00000000U)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_16            ((uint32_t)0x00000010U)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_32            ((uint32_t)0x00000020U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access
+  * @{
+  */
+#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE         ((uint32_t)0x00000040U)
+#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE        ((uint32_t)0x00000000U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode
+  * @{
+  */
+#define FSMC_BURST_ACCESS_MODE_DISABLE           ((uint32_t)0x00000000U)
+#define FSMC_BURST_ACCESS_MODE_ENABLE            ((uint32_t)0x00000100U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity
+  * @{
+  */
+#define FSMC_WAIT_SIGNAL_POLARITY_LOW            ((uint32_t)0x00000000U)
+#define FSMC_WAIT_SIGNAL_POLARITY_HIGH           ((uint32_t)0x00000200U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode 
+  * @{
+  */
+#define FSMC_WRAP_MODE_DISABLE                   ((uint32_t)0x00000000U)
+#define FSMC_WRAP_MODE_ENABLE                    ((uint32_t)0x00000400U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Timing FSMC Wait Timing
+  * @{
+  */
+#define FSMC_WAIT_TIMING_BEFORE_WS               ((uint32_t)0x00000000U)
+#define FSMC_WAIT_TIMING_DURING_WS               ((uint32_t)0x00000800U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Write_Operation FSMC Write Operation
+  * @{
+  */
+#define FSMC_WRITE_OPERATION_DISABLE             ((uint32_t)0x00000000U)
+#define FSMC_WRITE_OPERATION_ENABLE              ((uint32_t)0x00001000U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Signal FSMC Wait Signal
+  * @{
+  */
+#define FSMC_WAIT_SIGNAL_DISABLE                 ((uint32_t)0x00000000U)
+#define FSMC_WAIT_SIGNAL_ENABLE                  ((uint32_t)0x00002000U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Extended_Mode FSMC Extended Mode
+  * @{
+  */
+#define FSMC_EXTENDED_MODE_DISABLE               ((uint32_t)0x00000000U)
+#define FSMC_EXTENDED_MODE_ENABLE                ((uint32_t)0x00004000U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait
+  * @{
+  */
+#define FSMC_ASYNCHRONOUS_WAIT_DISABLE           ((uint32_t)0x00000000U)
+#define FSMC_ASYNCHRONOUS_WAIT_ENABLE            ((uint32_t)0x00008000U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Page_Size FSMC Page Size
+  * @{
+  */
+#define FSMC_PAGE_SIZE_NONE                      ((uint32_t)0x00000000U)
+#define FSMC_PAGE_SIZE_128                       ((uint32_t)0x00010000U)
+#define FSMC_PAGE_SIZE_256                       ((uint32_t)0x00020000U)
+#define FSMC_PAGE_SIZE_512                       ((uint32_t)0x00030000U)
+#define FSMC_PAGE_SIZE_1024                      ((uint32_t)0x00040000U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Write_Burst FSMC Write Burst
+  * @{
+  */
+#define FSMC_WRITE_BURST_DISABLE                 ((uint32_t)0x00000000U)
+#define FSMC_WRITE_BURST_ENABLE                  ((uint32_t)0x00080000U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Continous_Clock FSMC Continuous Clock
+  * @{
+  */
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY          ((uint32_t)0x00000000U)
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC         ((uint32_t)0x00100000U)
+/**
+  * @}
+  */
+
+  /** @defgroup FSMC_Access_Mode FSMC Access Mode
+  * @{
+  */
+#define FSMC_ACCESS_MODE_A                       ((uint32_t)0x00000000U)
+#define FSMC_ACCESS_MODE_B                       ((uint32_t)0x10000000U)
+#define FSMC_ACCESS_MODE_C                       ((uint32_t)0x20000000U)
+#define FSMC_ACCESS_MODE_D                       ((uint32_t)0x30000000U)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* FSMC_BANK1 */
+
+#if defined(FSMC_BANK3)||defined(FSMC_BANK4)
+
+/** @defgroup FSMC_LL_NAND_Controller FSMC NAND Controller
+  * @{
+  */
+/** @defgroup FSMC_NAND_Bank FSMC NAND Bank
+  * @{
+  */
+#define FSMC_NAND_BANK2                          ((uint32_t)0x00000010U)
+#define FSMC_NAND_BANK3                          ((uint32_t)0x00000100U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_feature FSMC Wait feature
+  * @{
+  */
+#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE       ((uint32_t)0x00000000U)
+#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE        ((uint32_t)0x00000002U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type
+  * @{
+  */
+#if defined(FSMC_BANK4)
+#define FSMC_PCR_MEMORY_TYPE_PCCARD              ((uint32_t)0x00000000U)
+#endif
+#define FSMC_PCR_MEMORY_TYPE_NAND                ((uint32_t)0x00000008U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_NAND_Data_Width FSMC NAND Data Width
+  * @{
+  */
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8                ((uint32_t)0x00000000U)
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16               ((uint32_t)0x00000010U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_ECC FSMC ECC
+  * @{
+  */
+#define FSMC_NAND_ECC_DISABLE                    ((uint32_t)0x00000000U)
+#define FSMC_NAND_ECC_ENABLE                     ((uint32_t)0x00000040U)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_ECC_Page_Size FSMC ECC Page Size
+  * @{
+  */
+#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE          ((uint32_t)0x00000000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE          ((uint32_t)0x00020000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE         ((uint32_t)0x00040000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE         ((uint32_t)0x00060000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE         ((uint32_t)0x00080000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE         ((uint32_t)0x000A0000U)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* FSMC_BANK3 */
+
+
+/** @defgroup FSMC_LL_Interrupt_definition FSMC Low Layer Interrupt definition
+  * @{
+  */
+#if defined(FSMC_BANK3)||defined(FSMC_BANK4)
+#define FSMC_IT_RISING_EDGE                      ((uint32_t)0x00000008U)
+#define FSMC_IT_LEVEL                            ((uint32_t)0x00000010U)
+#define FSMC_IT_FALLING_EDGE                     ((uint32_t)0x00000020U)
+#endif /* FSMC_BANK3 */
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_Flag_definition FSMC Low Layer Flag definition
+  * @{
+  */
+#if defined(FSMC_BANK3)||defined(FSMC_BANK4)
+#define FSMC_FLAG_RISING_EDGE                    ((uint32_t)0x00000001U)
+#define FSMC_FLAG_LEVEL                          ((uint32_t)0x00000002U)
+#define FSMC_FLAG_FALLING_EDGE                   ((uint32_t)0x00000004U)
+#define FSMC_FLAG_FEMPT                          ((uint32_t)0x00000040U)
+#endif /* FSMC_BANK3 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Macros FSMC_LL  Private Macros
+  * @{
+  */
+#if defined FSMC_BANK1
+/** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Macros
+  * @brief macros to handle NOR device enable/disable and read/write operations
+  * @{
+  */
+
+/**
+  * @brief  Enable the NORSRAM device access.
+  * @param  __INSTANCE__ FSMC_NORSRAM Instance
+  * @param  __BANK__ FSMC_NORSRAM Bank
+  * @retval None
+  */
+#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__)  ((__INSTANCE__)->BTCR[(__BANK__)] |= FSMC_BCRx_MBKEN)
+
+/**
+  * @brief  Disable the NORSRAM device access.
+  * @param  __INSTANCE__ FSMC_NORSRAM Instance
+  * @param  __BANK__ FSMC_NORSRAM Bank
+  * @retval None
+  */
+#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FSMC_BCRx_MBKEN)
+
+/**
+  * @}
+  */
+#endif /* FSMC_BANK1 */
+
+#if defined(FSMC_BANK3)
+/** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros
+ *  @brief macros to handle NAND device enable/disable
+ *  @{
+ */
+
+/**
+  * @brief  Enable the NAND device access.
+  * @param  __INSTANCE__ FSMC_NAND Instance
+  * @param  __BANK__     FSMC_NAND Bank
+  * @retval None
+  */
+#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__)  (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCRx_PBKEN): \
+                                                             ((__INSTANCE__)->PCR3 |= FSMC_PCRx_PBKEN))
+
+/**
+  * @brief  Disable the NAND device access.
+  * @param  __INSTANCE__ FSMC_NAND Instance
+  * @param  __BANK__     FSMC_NAND Bank
+  * @retval None
+  */
+#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? CLEAR_BIT((__INSTANCE__)->PCR2, FSMC_PCRx_PBKEN): \
+                                                             CLEAR_BIT((__INSTANCE__)->PCR3, FSMC_PCRx_PBKEN))
+
+/**
+  * @}
+  */
+#endif
+
+#if defined(FSMC_BANK4)
+/** @defgroup FSMC_LL_PCCARD_Macros FMC PCCARD Macros
+ *  @brief macros to handle PCCARD read/write operations 
+ *  @{
+ */
+/**
+  * @brief  Enable the PCCARD device access.
+  * @param  __INSTANCE__ FSMC_PCCARD Instance  
+  * @retval None
+  */ 
+#define __FSMC_PCCARD_ENABLE(__INSTANCE__)  ((__INSTANCE__)->PCR4 |= FSMC_PCRx_PBKEN)
+
+/**
+  * @brief  Disable the PCCARD device access.
+  * @param  __INSTANCE__ FSMC_PCCARD Instance     
+  * @retval None
+  */ 
+#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCRx_PBKEN)
+/**
+  * @}
+  */
+
+#endif
+#if defined(FSMC_BANK3)
+/** @defgroup FSMC_LL_NAND_Interrupt FSMC NAND Interrupt
+  * @brief macros to handle NAND interrupts
+  * @{
+  */
+
+/**
+  * @brief  Enable the NAND device interrupt.
+  * @param  __INSTANCE__  FSMC_NAND instance
+  * @param  __BANK__     FSMC_NAND Bank
+  * @param  __INTERRUPT__ FSMC_NAND interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FSMC_IT_LEVEL: Interrupt level.
+  *            @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__)  (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+                                                                               ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+  * @brief  Disable the NAND device interrupt.
+  * @param  __INSTANCE__  FSMC_NAND Instance
+  * @param  __BANK__     FSMC_NAND Bank
+  * @param  __INTERRUPT__ FSMC_NAND interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FSMC_IT_LEVEL: Interrupt level.
+  *            @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__)  (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+                                                                                ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__))) 
+
+/**
+  * @brief  Get flag status of the NAND device.
+  * @param  __INSTANCE__ FSMC_NAND Instance
+  * @param  __BANK__     FSMC_NAND Bank
+  * @param  __FLAG__     FSMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__)  (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+                                                                         (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+
+/**
+  * @brief  Clear flag status of the NAND device.
+  * @param  __INSTANCE__ FSMC_NAND Instance
+  * @param  __BANK__     FSMC_NAND Bank
+  * @param  __FLAG__     FSMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval None
+  */
+#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__)  (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+                                                                           ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+
+/**
+  * @}
+  */
+#endif /* FSMC_BANK3 */
+
+#if defined(FSMC_BANK4)
+/** @defgroup FSMC_LL_PCCARD_Interrupt FSMC PCCARD Interrupt
+  * @brief macros to handle PCCARD interrupts
+  * @{
+  */
+
+/**
+  * @brief  Enable the PCCARD device interrupt.
+  * @param  __INSTANCE__ FSMC_PCCARD instance  
+  * @param  __INTERRUPT__ FSMC_PCCARD interrupt 
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FSMC_IT_LEVEL: Interrupt level.
+  *            @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.       
+  * @retval None
+  */ 
+#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the PCCARD device interrupt.
+  * @param  __INSTANCE__ FSMC_PCCARD instance  
+  * @param  __INTERRUPT__ FSMC_PCCARD interrupt 
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FSMC_IT_LEVEL: Interrupt level.
+  *            @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.       
+  * @retval None
+  */ 
+#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__)) 
+
+/**
+  * @brief  Get flag status of the PCCARD device.
+  * @param  __INSTANCE__ FSMC_PCCARD instance  
+  * @param  __FLAG__ FSMC_PCCARD flag
+  *         This parameter can be any combination of the following values:
+  *            @arg  FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg  FSMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg  FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg  FSMC_FLAG_FEMPT: FIFO empty flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__)  (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear flag status of the PCCARD device.
+  * @param  __INSTANCE__ FSMC_PCCARD instance  
+  * @param  __FLAG__ FSMC_PCCARD flag
+  *         This parameter can be any combination of the following values:
+  *            @arg  FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg  FSMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg  FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg  FSMC_FLAG_FEMPT: FIFO empty flag.   
+  * @retval None
+  */
+#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__)  ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+
+/**
+  * @}
+  */
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Functions FSMC LL Private Functions
+  *  @{
+  */
+
+#if defined FSMC_BANK1
+/** @defgroup FSMC_LL_NORSRAM  NOR SRAM
+  *  @{
+  */
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef  FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef  FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+#endif /* FSMC_BANK1 */
+
+#if defined(FSMC_BANK3)
+/** @defgroup FSMC_LL_NAND NAND
+  *  @{
+  */
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef  FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+#endif /* FSMC_BANK3 */
+
+#if defined(FSMC_BANK4)
+/** @defgroup FSMC_LL_PCCARD PCCARD
+  *  @{
+  */
+/** @defgroup FSMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef  FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef  FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef  FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef  FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+#endif /* FSMC_BANK4 */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_LL_FSMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/inc/stm32f1xx_ll_iwdg.h

@@ -0,0 +1,311 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_iwdg.h
+  * @author  MCD Application Team
+  * @brief   Header file of IWDG LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_LL_IWDG_H
+#define STM32F1xx_LL_IWDG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined(IWDG)
+
+/** @defgroup IWDG_LL IWDG
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IWDG_LL_Private_Constants IWDG Private Constants
+  * @{
+  */
+
+#define LL_IWDG_KEY_RELOAD                 0x0000AAAAU               /*!< IWDG Reload Counter Enable   */
+#define LL_IWDG_KEY_ENABLE                 0x0000CCCCU               /*!< IWDG Peripheral Enable       */
+#define LL_IWDG_KEY_WR_ACCESS_ENABLE       0x00005555U               /*!< IWDG KR Write Access Enable  */
+#define LL_IWDG_KEY_WR_ACCESS_DISABLE      0x00000000U               /*!< IWDG KR Write Access Disable */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_LL_Exported_Constants IWDG Exported Constants
+  * @{
+  */
+
+/** @defgroup IWDG_LL_EC_GET_FLAG Get Flags Defines
+  * @brief    Flags defines which can be used with LL_IWDG_ReadReg function
+  * @{
+  */
+#define LL_IWDG_SR_PVU                     IWDG_SR_PVU                           /*!< Watchdog prescaler value update */
+#define LL_IWDG_SR_RVU                     IWDG_SR_RVU                           /*!< Watchdog counter reload value update */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_LL_EC_PRESCALER  Prescaler Divider
+  * @{
+  */
+#define LL_IWDG_PRESCALER_4                0x00000000U                           /*!< Divider by 4   */
+#define LL_IWDG_PRESCALER_8                (IWDG_PR_PR_0)                        /*!< Divider by 8   */
+#define LL_IWDG_PRESCALER_16               (IWDG_PR_PR_1)                        /*!< Divider by 16  */
+#define LL_IWDG_PRESCALER_32               (IWDG_PR_PR_1 | IWDG_PR_PR_0)         /*!< Divider by 32  */
+#define LL_IWDG_PRESCALER_64               (IWDG_PR_PR_2)                        /*!< Divider by 64  */
+#define LL_IWDG_PRESCALER_128              (IWDG_PR_PR_2 | IWDG_PR_PR_0)         /*!< Divider by 128 */
+#define LL_IWDG_PRESCALER_256              (IWDG_PR_PR_2 | IWDG_PR_PR_1)         /*!< Divider by 256 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IWDG_LL_Exported_Macros IWDG Exported Macros
+  * @{
+  */
+
+/** @defgroup IWDG_LL_EM_WRITE_READ Common Write and read registers Macros
+  * @{
+  */
+
+/**
+  * @brief  Write a value in IWDG register
+  * @param  __INSTANCE__ IWDG Instance
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_IWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in IWDG register
+  * @param  __INSTANCE__ IWDG Instance
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_IWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IWDG_LL_Exported_Functions IWDG Exported Functions
+  * @{
+  */
+/** @defgroup IWDG_LL_EF_Configuration Configuration
+  * @{
+  */
+
+/**
+  * @brief  Start the Independent Watchdog
+  * @note   Except if the hardware watchdog option is selected
+  * @rmtoll KR           KEY           LL_IWDG_Enable
+  * @param  IWDGx IWDG Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_IWDG_Enable(IWDG_TypeDef *IWDGx)
+{
+  WRITE_REG(IWDG->KR, LL_IWDG_KEY_ENABLE);
+}
+
+/**
+  * @brief  Reloads IWDG counter with value defined in the reload register
+  * @rmtoll KR           KEY           LL_IWDG_ReloadCounter
+  * @param  IWDGx IWDG Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_IWDG_ReloadCounter(IWDG_TypeDef *IWDGx)
+{
+  WRITE_REG(IWDG->KR, LL_IWDG_KEY_RELOAD);
+}
+
+/**
+  * @brief  Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers
+  * @rmtoll KR           KEY           LL_IWDG_EnableWriteAccess
+  * @param  IWDGx IWDG Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_IWDG_EnableWriteAccess(IWDG_TypeDef *IWDGx)
+{
+  WRITE_REG(IWDG->KR, LL_IWDG_KEY_WR_ACCESS_ENABLE);
+}
+
+/**
+  * @brief  Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers
+  * @rmtoll KR           KEY           LL_IWDG_DisableWriteAccess
+  * @param  IWDGx IWDG Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_IWDG_DisableWriteAccess(IWDG_TypeDef *IWDGx)
+{
+  WRITE_REG(IWDG->KR, LL_IWDG_KEY_WR_ACCESS_DISABLE);
+}
+
+/**
+  * @brief  Select the prescaler of the IWDG
+  * @rmtoll PR           PR            LL_IWDG_SetPrescaler
+  * @param  IWDGx IWDG Instance
+  * @param  Prescaler This parameter can be one of the following values:
+  *         @arg @ref LL_IWDG_PRESCALER_4
+  *         @arg @ref LL_IWDG_PRESCALER_8
+  *         @arg @ref LL_IWDG_PRESCALER_16
+  *         @arg @ref LL_IWDG_PRESCALER_32
+  *         @arg @ref LL_IWDG_PRESCALER_64
+  *         @arg @ref LL_IWDG_PRESCALER_128
+  *         @arg @ref LL_IWDG_PRESCALER_256
+  * @retval None
+  */
+__STATIC_INLINE void LL_IWDG_SetPrescaler(IWDG_TypeDef *IWDGx, uint32_t Prescaler)
+{
+  WRITE_REG(IWDGx->PR, IWDG_PR_PR & Prescaler);
+}
+
+/**
+  * @brief  Get the selected prescaler of the IWDG
+  * @rmtoll PR           PR            LL_IWDG_GetPrescaler
+  * @param  IWDGx IWDG Instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_IWDG_PRESCALER_4
+  *         @arg @ref LL_IWDG_PRESCALER_8
+  *         @arg @ref LL_IWDG_PRESCALER_16
+  *         @arg @ref LL_IWDG_PRESCALER_32
+  *         @arg @ref LL_IWDG_PRESCALER_64
+  *         @arg @ref LL_IWDG_PRESCALER_128
+  *         @arg @ref LL_IWDG_PRESCALER_256
+  */
+__STATIC_INLINE uint32_t LL_IWDG_GetPrescaler(IWDG_TypeDef *IWDGx)
+{
+  return (uint32_t)(READ_REG(IWDGx->PR));
+}
+
+/**
+  * @brief  Specify the IWDG down-counter reload value
+  * @rmtoll RLR          RL            LL_IWDG_SetReloadCounter
+  * @param  IWDGx IWDG Instance
+  * @param  Counter Value between Min_Data=0 and Max_Data=0x0FFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_IWDG_SetReloadCounter(IWDG_TypeDef *IWDGx, uint32_t Counter)
+{
+  WRITE_REG(IWDGx->RLR, IWDG_RLR_RL & Counter);
+}
+
+/**
+  * @brief  Get the specified IWDG down-counter reload value
+  * @rmtoll RLR          RL            LL_IWDG_GetReloadCounter
+  * @param  IWDGx IWDG Instance
+  * @retval Value between Min_Data=0 and Max_Data=0x0FFF
+  */
+__STATIC_INLINE uint32_t LL_IWDG_GetReloadCounter(IWDG_TypeDef *IWDGx)
+{
+  return (uint32_t)(READ_REG(IWDGx->RLR));
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_LL_EF_FLAG_Management FLAG_Management
+  * @{
+  */
+
+/**
+  * @brief  Check if flag Prescaler Value Update is set or not
+  * @rmtoll SR           PVU           LL_IWDG_IsActiveFlag_PVU
+  * @param  IWDGx IWDG Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_PVU(IWDG_TypeDef *IWDGx)
+{
+  return (READ_BIT(IWDGx->SR, IWDG_SR_PVU) == (IWDG_SR_PVU));
+}
+
+/**
+  * @brief  Check if flag Reload Value Update is set or not
+  * @rmtoll SR           RVU           LL_IWDG_IsActiveFlag_RVU
+  * @param  IWDGx IWDG Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_RVU(IWDG_TypeDef *IWDGx)
+{
+  return (READ_BIT(IWDGx->SR, IWDG_SR_RVU) == (IWDG_SR_RVU));
+}
+
+
+/**
+  * @brief  Check if all flags Prescaler, Reload & Window Value Update are reset or not
+  * @rmtoll SR           PVU           LL_IWDG_IsReady\n
+  *         SR           RVU           LL_IWDG_IsReady
+  * @param  IWDGx IWDG Instance
+  * @retval State of bits (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_IWDG_IsReady(IWDG_TypeDef *IWDGx)
+{
+  return (READ_BIT(IWDGx->SR, IWDG_SR_PVU | IWDG_SR_RVU) == 0U);
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* IWDG) */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_LL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/inc/stm32f1xx_ll_pwr.h

@@ -0,0 +1,440 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_pwr.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_LL_PWR_H
+#define __STM32F1xx_LL_PWR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined(PWR)
+
+/** @defgroup PWR_LL PWR
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
+  * @{
+  */
+
+/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
+  * @brief    Flags defines which can be used with LL_PWR_WriteReg function
+  * @{
+  */
+#define LL_PWR_CR_CSBF                     PWR_CR_CSBF            /*!< Clear standby flag */
+#define LL_PWR_CR_CWUF                     PWR_CR_CWUF            /*!< Clear wakeup flag */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
+  * @brief    Flags defines which can be used with LL_PWR_ReadReg function
+  * @{
+  */
+#define LL_PWR_CSR_WUF                     PWR_CSR_WUF            /*!< Wakeup flag */
+#define LL_PWR_CSR_SBF                     PWR_CSR_SBF            /*!< Standby flag */
+#define LL_PWR_CSR_PVDO                    PWR_CSR_PVDO           /*!< Power voltage detector output flag */
+#define LL_PWR_CSR_EWUP1                   PWR_CSR_EWUP           /*!< Enable WKUP pin 1 */
+/**
+  * @}
+  */
+
+
+/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
+  * @{
+  */
+#define LL_PWR_MODE_STOP_MAINREGU             0x00000000U                    /*!< Enter Stop mode when the CPU enters deepsleep */
+#define LL_PWR_MODE_STOP_LPREGU               (PWR_CR_LPDS)                  /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */
+#define LL_PWR_MODE_STANDBY                   (PWR_CR_PDDS)                  /*!< Enter Standby mode when the CPU enters deepsleep */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE  Regulator Mode In Deep Sleep Mode
+ * @{
+ */
+#define LL_PWR_REGU_DSMODE_MAIN        0x00000000U           /*!< Voltage Regulator in main mode during deepsleep mode */
+#define LL_PWR_REGU_DSMODE_LOW_POWER   (PWR_CR_LPDS)         /*!< Voltage Regulator in low-power mode during deepsleep mode */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
+  * @{
+  */
+#define LL_PWR_PVDLEVEL_0                  (PWR_CR_PLS_LEV0)      /*!< Voltage threshold detected by PVD 2.2 V */
+#define LL_PWR_PVDLEVEL_1                  (PWR_CR_PLS_LEV1)      /*!< Voltage threshold detected by PVD 2.3 V */
+#define LL_PWR_PVDLEVEL_2                  (PWR_CR_PLS_LEV2)      /*!< Voltage threshold detected by PVD 2.4 V */
+#define LL_PWR_PVDLEVEL_3                  (PWR_CR_PLS_LEV3)      /*!< Voltage threshold detected by PVD 2.5 V */
+#define LL_PWR_PVDLEVEL_4                  (PWR_CR_PLS_LEV4)      /*!< Voltage threshold detected by PVD 2.6 V */
+#define LL_PWR_PVDLEVEL_5                  (PWR_CR_PLS_LEV5)      /*!< Voltage threshold detected by PVD 2.7 V */
+#define LL_PWR_PVDLEVEL_6                  (PWR_CR_PLS_LEV6)      /*!< Voltage threshold detected by PVD 2.8 V */
+#define LL_PWR_PVDLEVEL_7                  (PWR_CR_PLS_LEV7)      /*!< Voltage threshold detected by PVD 2.9 V */
+/**
+  * @}
+  */
+/** @defgroup PWR_LL_EC_WAKEUP_PIN  Wakeup Pins
+  * @{
+  */
+#define LL_PWR_WAKEUP_PIN1                 (PWR_CSR_EWUP)         /*!< WKUP pin 1 : PA0 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
+  * @{
+  */
+
+/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
+  * @{
+  */
+
+/**
+  * @brief  Write a value in PWR register
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in PWR register
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
+  * @{
+  */
+
+/** @defgroup PWR_LL_EF_Configuration Configuration
+  * @{
+  */
+
+/**
+  * @brief  Enable access to the backup domain
+  * @rmtoll CR    DBP       LL_PWR_EnableBkUpAccess
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
+{
+  SET_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+  * @brief  Disable access to the backup domain
+  * @rmtoll CR    DBP       LL_PWR_DisableBkUpAccess
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
+{
+  CLEAR_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+  * @brief  Check if the backup domain is enabled
+  * @rmtoll CR    DBP       LL_PWR_IsEnabledBkUpAccess
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
+{
+  return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP));
+}
+
+/**
+  * @brief  Set voltage Regulator mode during deep sleep mode
+  * @rmtoll CR    LPDS         LL_PWR_SetRegulModeDS
+  * @param  RegulMode This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_REGU_DSMODE_MAIN
+  *         @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
+{
+  MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode);
+}
+
+/**
+  * @brief  Get voltage Regulator mode during deep sleep mode
+  * @rmtoll CR    LPDS         LL_PWR_GetRegulModeDS
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_PWR_REGU_DSMODE_MAIN
+  *         @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+  */
+__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
+{
+  return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS));
+}
+
+/**
+  * @brief  Set Power Down mode when CPU enters deepsleep
+  * @rmtoll CR    PDDS         LL_PWR_SetPowerMode\n
+  * @rmtoll CR    LPDS         LL_PWR_SetPowerMode
+  * @param  PDMode This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_MODE_STOP_MAINREGU
+  *         @arg @ref LL_PWR_MODE_STOP_LPREGU
+  *         @arg @ref LL_PWR_MODE_STANDBY
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
+{
+  MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
+}
+
+/**
+  * @brief  Get Power Down mode when CPU enters deepsleep
+  * @rmtoll CR    PDDS         LL_PWR_GetPowerMode\n
+  * @rmtoll CR    LPDS         LL_PWR_GetPowerMode
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_PWR_MODE_STOP_MAINREGU
+  *         @arg @ref LL_PWR_MODE_STOP_LPREGU
+  *         @arg @ref LL_PWR_MODE_STANDBY
+  */
+__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
+{
+  return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS)));
+}
+
+/**
+  * @brief  Configure the voltage threshold detected by the Power Voltage Detector
+  * @rmtoll CR    PLS       LL_PWR_SetPVDLevel
+  * @param  PVDLevel This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_PVDLEVEL_0
+  *         @arg @ref LL_PWR_PVDLEVEL_1
+  *         @arg @ref LL_PWR_PVDLEVEL_2
+  *         @arg @ref LL_PWR_PVDLEVEL_3
+  *         @arg @ref LL_PWR_PVDLEVEL_4
+  *         @arg @ref LL_PWR_PVDLEVEL_5
+  *         @arg @ref LL_PWR_PVDLEVEL_6
+  *         @arg @ref LL_PWR_PVDLEVEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
+{
+  MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel);
+}
+
+/**
+  * @brief  Get the voltage threshold detection
+  * @rmtoll CR    PLS       LL_PWR_GetPVDLevel
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_PWR_PVDLEVEL_0
+  *         @arg @ref LL_PWR_PVDLEVEL_1
+  *         @arg @ref LL_PWR_PVDLEVEL_2
+  *         @arg @ref LL_PWR_PVDLEVEL_3
+  *         @arg @ref LL_PWR_PVDLEVEL_4
+  *         @arg @ref LL_PWR_PVDLEVEL_5
+  *         @arg @ref LL_PWR_PVDLEVEL_6
+  *         @arg @ref LL_PWR_PVDLEVEL_7
+  */
+__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
+{
+  return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS));
+}
+
+/**
+  * @brief  Enable Power Voltage Detector
+  * @rmtoll CR    PVDE       LL_PWR_EnablePVD
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_EnablePVD(void)
+{
+  SET_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+  * @brief  Disable Power Voltage Detector
+  * @rmtoll CR    PVDE       LL_PWR_DisablePVD
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_DisablePVD(void)
+{
+  CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+  * @brief  Check if Power Voltage Detector is enabled
+  * @rmtoll CR    PVDE       LL_PWR_IsEnabledPVD
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
+{
+  return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE));
+}
+
+/**
+  * @brief  Enable the WakeUp PINx functionality
+  * @rmtoll CSR   EWUP       LL_PWR_EnableWakeUpPin
+  * @param  WakeUpPin This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_WAKEUP_PIN1
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
+{
+  SET_BIT(PWR->CSR, WakeUpPin);
+}
+
+/**
+  * @brief  Disable the WakeUp PINx functionality
+  * @rmtoll CSR   EWUP       LL_PWR_DisableWakeUpPin
+  * @param  WakeUpPin This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_WAKEUP_PIN1
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
+{
+  CLEAR_BIT(PWR->CSR, WakeUpPin);
+}
+
+/**
+  * @brief  Check if the WakeUp PINx functionality is enabled
+  * @rmtoll CSR   EWUP       LL_PWR_IsEnabledWakeUpPin
+  * @param  WakeUpPin This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_WAKEUP_PIN1
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
+{
+  return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin));
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
+  * @{
+  */
+
+/**
+  * @brief  Get Wake-up Flag
+  * @rmtoll CSR   WUF       LL_PWR_IsActiveFlag_WU
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void)
+{
+  return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF));
+}
+
+/**
+  * @brief  Get Standby Flag
+  * @rmtoll CSR   SBF       LL_PWR_IsActiveFlag_SB
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
+{
+  return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF));
+}
+
+/**
+  * @brief  Indicate whether VDD voltage is below the selected PVD threshold
+  * @rmtoll CSR   PVDO       LL_PWR_IsActiveFlag_PVDO
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
+{
+  return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO));
+}
+
+/**
+  * @brief  Clear Standby Flag
+  * @rmtoll CR   CSBF       LL_PWR_ClearFlag_SB
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
+{
+  SET_BIT(PWR->CR, PWR_CR_CSBF);
+}
+
+/**
+  * @brief  Clear Wake-up Flags
+  * @rmtoll CR   CWUF       LL_PWR_ClearFlag_WU
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
+{
+  SET_BIT(PWR->CR, PWR_CR_CWUF);
+}
+
+/**
+  * @}
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup PWR_LL_EF_Init De-initialization function
+  * @{
+  */
+ErrorStatus LL_PWR_DeInit(void);
+/**
+  * @}
+  */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined(PWR) */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_LL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/inc/stm32f1xx_ll_usb.h

@@ -0,0 +1,651 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_usb.h
+  * @author  MCD Application Team
+  * @brief   Header file of USB Low Layer HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_LL_USB_H
+#define STM32F1xx_LL_USB_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+#if defined (USB) || defined (USB_OTG_FS)
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup USB_LL
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @brief  USB Mode definition
+  */
+#if defined (USB_OTG_FS)
+
+typedef enum
+{
+  USB_DEVICE_MODE  = 0,
+  USB_HOST_MODE    = 1,
+  USB_DRD_MODE     = 2
+} USB_ModeTypeDef;
+
+/**
+  * @brief  URB States definition
+  */
+typedef enum
+{
+  URB_IDLE = 0,
+  URB_DONE,
+  URB_NOTREADY,
+  URB_NYET,
+  URB_ERROR,
+  URB_STALL
+} USB_OTG_URBStateTypeDef;
+
+/**
+  * @brief  Host channel States  definition
+  */
+typedef enum
+{
+  HC_IDLE = 0,
+  HC_XFRC,
+  HC_HALTED,
+  HC_NAK,
+  HC_NYET,
+  HC_STALL,
+  HC_XACTERR,
+  HC_BBLERR,
+  HC_DATATGLERR
+} USB_OTG_HCStateTypeDef;
+
+/**
+  * @brief  USB OTG Initialization Structure definition
+  */
+typedef struct
+{
+  uint32_t dev_endpoints;           /*!< Device Endpoints number.
+                                         This parameter depends on the used USB core.
+                                         This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+  uint32_t Host_channels;           /*!< Host Channels number.
+                                         This parameter Depends on the used USB core.
+                                         This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+  uint32_t speed;                   /*!< USB Core speed.
+                                         This parameter can be any value of @ref USB_Core_Speed_                */
+
+  uint32_t dma_enable;              /*!< Enable or disable of the USB embedded DMA used only for OTG HS.        */
+
+  uint32_t ep0_mps;                 /*!< Set the Endpoint 0 Max Packet size.                                    */
+
+  uint32_t phy_itface;              /*!< Select the used PHY interface.
+                                         This parameter can be any value of @ref USB_Core_PHY_                  */
+
+  uint32_t Sof_enable;              /*!< Enable or disable the output of the SOF signal.                        */
+
+  uint32_t low_power_enable;        /*!< Enable or disable the low power mode.                                  */
+
+  uint32_t lpm_enable;              /*!< Enable or disable Link Power Management.                               */
+
+  uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                    */
+
+  uint32_t vbus_sensing_enable;     /*!< Enable or disable the VBUS Sensing feature.                            */
+
+  uint32_t use_dedicated_ep1;       /*!< Enable or disable the use of the dedicated EP1 interrupt.              */
+
+  uint32_t use_external_vbus;       /*!< Enable or disable the use of the external VBUS.                        */
+} USB_OTG_CfgTypeDef;
+
+typedef struct
+{
+  uint8_t   num;                  /*!< Endpoint number
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
+
+  uint8_t   is_in;                /*!< Endpoint direction
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint8_t   is_stall;             /*!< Endpoint stall condition
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint8_t   type;                 /*!< Endpoint type
+                                       This parameter can be any value of @ref USB_EP_Type_                     */
+
+  uint8_t   data_pid_start;       /*!< Initial data PID
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint8_t   even_odd_frame;       /*!< IFrame parity
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint16_t  tx_fifo_num;          /*!< Transmission FIFO number
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
+
+  uint32_t  maxpacket;            /*!< Endpoint Max packet size
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+  uint8_t   *xfer_buff;           /*!< Pointer to transfer buffer                                               */
+
+  uint32_t  dma_addr;             /*!< 32 bits aligned transfer buffer address                                  */
+
+  uint32_t  xfer_len;             /*!< Current transfer length                                                  */
+
+  uint32_t  xfer_count;           /*!< Partial transfer length in case of multi packet transfer                 */
+} USB_OTG_EPTypeDef;
+
+typedef struct
+{
+  uint8_t   dev_addr ;          /*!< USB device address.
+                                     This parameter must be a number between Min_Data = 1 and Max_Data = 255    */
+
+  uint8_t   ch_num;             /*!< Host channel number.
+                                     This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
+
+  uint8_t   ep_num;             /*!< Endpoint number.
+                                     This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
+
+  uint8_t   ep_is_in;           /*!< Endpoint direction
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint8_t   speed;              /*!< USB Host speed.
+                                     This parameter can be any value of @ref USB_Core_Speed_                    */
+
+  uint8_t   do_ping;            /*!< Enable or disable the use of the PING protocol for HS mode.                */
+
+  uint8_t   process_ping;       /*!< Execute the PING protocol for HS mode.                                     */
+
+  uint8_t   ep_type;            /*!< Endpoint Type.
+                                     This parameter can be any value of @ref USB_EP_Type_                       */
+
+  uint16_t  max_packet;         /*!< Endpoint Max packet size.
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 64KB   */
+
+  uint8_t   data_pid;           /*!< Initial data PID.
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint8_t   *xfer_buff;         /*!< Pointer to transfer buffer.                                                */
+
+  uint32_t  xfer_len;           /*!< Current transfer length.                                                   */
+
+  uint32_t  xfer_count;         /*!< Partial transfer length in case of multi packet transfer.                  */
+
+  uint8_t   toggle_in;          /*!< IN transfer current toggle flag.
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint8_t   toggle_out;         /*!< OUT transfer current toggle flag
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint32_t  dma_addr;           /*!< 32 bits aligned transfer buffer address.                                   */
+
+  uint32_t  ErrCnt;             /*!< Host channel error count.*/
+
+  USB_OTG_URBStateTypeDef  urb_state;  /*!< URB state.
+                                            This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
+  USB_OTG_HCStateTypeDef   state;     /*!< Host Channel state.
+                                           This parameter can be any value of @ref USB_OTG_HCStateTypeDef   */
+} USB_OTG_HCTypeDef;
+#endif /* defined (USB_OTG_FS) */
+
+#if defined (USB)
+
+typedef enum
+{
+  USB_DEVICE_MODE  = 0
+} USB_ModeTypeDef;
+
+/**
+  * @brief  USB Initialization Structure definition
+  */
+typedef struct
+{
+  uint32_t dev_endpoints;           /*!< Device Endpoints number.
+                                         This parameter depends on the used USB core.
+                                         This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+  uint32_t speed;                   /*!< USB Core speed.
+                                         This parameter can be any value of @ref USB_Core_Speed                 */
+
+  uint32_t ep0_mps;                 /*!< Set the Endpoint 0 Max Packet size.                                    */
+
+  uint32_t phy_itface;              /*!< Select the used PHY interface.
+                                         This parameter can be any value of @ref USB_Core_PHY                   */
+
+  uint32_t Sof_enable;              /*!< Enable or disable the output of the SOF signal.                        */
+
+  uint32_t low_power_enable;        /*!< Enable or disable Low Power mode                                       */
+
+  uint32_t lpm_enable;              /*!< Enable or disable Battery charging.                                    */
+
+  uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                    */
+} USB_CfgTypeDef;
+
+typedef struct
+{
+  uint8_t   num;             /*!< Endpoint number
+                                  This parameter must be a number between Min_Data = 1 and Max_Data = 15    */
+
+  uint8_t   is_in;           /*!< Endpoint direction
+                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
+
+  uint8_t   is_stall;        /*!< Endpoint stall condition
+                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
+
+  uint8_t   type;            /*!< Endpoint type
+                                  This parameter can be any value of @ref USB_EP_Type                       */
+
+  uint8_t   data_pid_start;  /*!< Initial data PID
+                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
+
+  uint16_t  pmaadress;       /*!< PMA Address
+                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K    */
+
+  uint16_t  pmaaddr0;        /*!< PMA Address0
+                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K    */
+
+  uint16_t  pmaaddr1;        /*!< PMA Address1
+                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K    */
+
+  uint8_t   doublebuffer;    /*!< Double buffer enable
+                                  This parameter can be 0 or 1                                              */
+
+  uint16_t  tx_fifo_num;     /*!< This parameter is not required by USB Device FS peripheral, it is used
+                                  only by USB OTG FS peripheral
+                                  This parameter is added to ensure compatibility across USB peripherals    */
+
+  uint32_t  maxpacket;       /*!< Endpoint Max packet size
+                                  This parameter must be a number between Min_Data = 0 and Max_Data = 64KB  */
+
+  uint8_t   *xfer_buff;      /*!< Pointer to transfer buffer                                                */
+
+  uint32_t  xfer_len;        /*!< Current transfer length                                                   */
+
+  uint32_t  xfer_count;      /*!< Partial transfer length in case of multi packet transfer                  */
+
+} USB_EPTypeDef;
+#endif /* defined (USB) */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+#if defined (USB_OTG_FS)
+/** @defgroup USB_OTG_CORE VERSION ID
+  * @{
+  */
+#define USB_OTG_CORE_ID_300A          0x4F54300AU
+#define USB_OTG_CORE_ID_310A          0x4F54310AU
+/**
+  * @}
+  */
+
+/** @defgroup USB_Core_Mode_ USB Core Mode
+  * @{
+  */
+#define USB_OTG_MODE_DEVICE                    0U
+#define USB_OTG_MODE_HOST                      1U
+#define USB_OTG_MODE_DRD                       2U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL Device Speed
+  * @{
+  */
+#define USBD_FS_SPEED               2U
+#define USBH_FS_SPEED               1U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed
+  * @{
+  */
+#define USB_OTG_SPEED_FULL                     3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY
+  * @{
+  */
+#define USB_OTG_ULPI_PHY                       1U
+#define USB_OTG_EMBEDDED_PHY                   2U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value
+  * @{
+  */
+#ifndef USBD_FS_TRDT_VALUE
+#define USBD_FS_TRDT_VALUE           5U
+#define USBD_DEFAULT_TRDT_VALUE      9U
+#endif /* USBD_HS_TRDT_VALUE */
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS
+  * @{
+  */
+#define USB_OTG_FS_MAX_PACKET_SIZE             64U
+#define USB_OTG_MAX_EP0_SIZE                   64U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency
+  * @{
+  */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ     (0U << 1)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ     (1U << 1)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ              (3U << 1)
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval
+  * @{
+  */
+#define DCFG_FRAME_INTERVAL_80                 0U
+#define DCFG_FRAME_INTERVAL_85                 1U
+#define DCFG_FRAME_INTERVAL_90                 2U
+#define DCFG_FRAME_INTERVAL_95                 3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
+  * @{
+  */
+#define DEP0CTL_MPS_64                         0U
+#define DEP0CTL_MPS_32                         1U
+#define DEP0CTL_MPS_16                         2U
+#define DEP0CTL_MPS_8                          3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed
+  * @{
+  */
+#define EP_SPEED_LOW                           0U
+#define EP_SPEED_FULL                          1U
+#define EP_SPEED_HIGH                          2U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_EP_Type USB Low Layer EP Type
+  * @{
+  */
+#define EP_TYPE_CTRL                           0U
+#define EP_TYPE_ISOC                           1U
+#define EP_TYPE_BULK                           2U
+#define EP_TYPE_INTR                           3U
+#define EP_TYPE_MSK                            3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines
+  * @{
+  */
+#define STS_GOUT_NAK                           1U
+#define STS_DATA_UPDT                          2U
+#define STS_XFER_COMP                          3U
+#define STS_SETUP_COMP                         4U
+#define STS_SETUP_UPDT                         6U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines
+  * @{
+  */
+#define HCFG_30_60_MHZ                         0U
+#define HCFG_48_MHZ                            1U
+#define HCFG_6_MHZ                             2U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines
+  * @{
+  */
+#define HPRT0_PRTSPD_HIGH_SPEED                0U
+#define HPRT0_PRTSPD_FULL_SPEED                1U
+#define HPRT0_PRTSPD_LOW_SPEED                 2U
+/**
+  * @}
+  */
+
+#define HCCHAR_CTRL                            0U
+#define HCCHAR_ISOC                            1U
+#define HCCHAR_BULK                            2U
+#define HCCHAR_INTR                            3U
+
+#define HC_PID_DATA0                           0U
+#define HC_PID_DATA2                           1U
+#define HC_PID_DATA1                           2U
+#define HC_PID_SETUP                           3U
+
+#define GRXSTS_PKTSTS_IN                       2U
+#define GRXSTS_PKTSTS_IN_XFER_COMP             3U
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR          5U
+#define GRXSTS_PKTSTS_CH_HALTED                7U
+
+#define USBx_PCGCCTL    *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0      *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE     ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE))
+#define USBx_INEP(i)    ((USB_OTG_INEndpointTypeDef *)(USBx_BASE + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
+#define USBx_OUTEP(i)   ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
+#define USBx_DFIFO(i)   *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE))
+
+#define USBx_HOST       ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE))
+#define USBx_HC(i)      ((USB_OTG_HostChannelTypeDef *)(USBx_BASE + USB_OTG_HOST_CHANNEL_BASE + ((i) * USB_OTG_HOST_CHANNEL_SIZE)))
+#endif /* defined (USB_OTG_FS) */
+
+#if defined (USB)
+/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
+  * @{
+  */
+#define DEP0CTL_MPS_64                         0U
+#define DEP0CTL_MPS_32                         1U
+#define DEP0CTL_MPS_16                         2U
+#define DEP0CTL_MPS_8                          3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_EP_Type USB Low Layer EP Type
+  * @{
+  */
+#define EP_TYPE_CTRL                           0U
+#define EP_TYPE_ISOC                           1U
+#define EP_TYPE_BULK                           2U
+#define EP_TYPE_INTR                           3U
+#define EP_TYPE_MSK                            3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL Device Speed
+  * @{
+  */
+#define USBD_FS_SPEED                          2U
+/**
+  * @}
+  */
+
+#define BTABLE_ADDRESS                         0x000U
+#define PMA_ACCESS                             2U
+#endif /* defined (USB) */
+#if defined (USB_OTG_FS)
+#define EP_ADDR_MSK                            0xFU
+#endif /* defined (USB_OTG_FS) */
+#if defined (USB)
+#define EP_ADDR_MSK                            0x7U
+#endif /* defined (USB) */
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros
+  * @{
+  */
+#if defined (USB_OTG_FS)
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)     ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)   ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__)          (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__)         (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+#endif /* defined (USB_OTG_FS) */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions
+  * @{
+  */
+#if defined (USB_OTG_FS)
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num);
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);
+void             *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup);
+uint8_t           USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
+uint32_t          USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
+void              USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t          USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+                              uint8_t ch_num,
+                              uint8_t epnum,
+                              uint8_t dev_address,
+                              uint8_t speed,
+                              uint8_t ep_type,
+                              uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc);
+uint32_t          USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
+#endif /* defined (USB_OTG_FS) */
+
+#if defined (USB)
+HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num);
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);
+void             *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup);
+uint32_t          USB_ReadInterrupts(USB_TypeDef *USBx);
+uint32_t          USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx);
+uint32_t          USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum);
+uint32_t          USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx);
+uint32_t          USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum);
+void              USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx);
+void USB_WritePMA(USB_TypeDef  *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+void USB_ReadPMA(USB_TypeDef  *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+#endif /* defined (USB) */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* defined (USB) || defined (USB_OTG_FS) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F1xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/inc/stm32f1xx_ll_wwdg.h

@@ -0,0 +1,318 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_wwdg.h
+  * @author  MCD Application Team
+  * @brief   Header file of WWDG LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_LL_WWDG_H
+#define STM32F1xx_LL_WWDG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (WWDG)
+/** @defgroup WWDG_LL WWDG
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup WWDG_LL_Exported_Constants WWDG Exported Constants
+  * @{
+  */
+
+/** @defgroup WWDG_LL_EC_IT IT Defines
+  * @brief    IT defines which can be used with LL_WWDG_ReadReg and  LL_WWDG_WriteReg functions
+  * @{
+  */
+#define LL_WWDG_CFR_EWI                    WWDG_CFR_EWI
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_LL_EC_PRESCALER  PRESCALER
+* @{
+*/
+#define LL_WWDG_PRESCALER_1                0x00000000U                                             /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define LL_WWDG_PRESCALER_2                WWDG_CFR_WDGTB_0                                        /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define LL_WWDG_PRESCALER_4                WWDG_CFR_WDGTB_1                                        /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define LL_WWDG_PRESCALER_8                (WWDG_CFR_WDGTB_0 | WWDG_CFR_WDGTB_1)                   /*!< WWDG counter clock = (PCLK1/4096)/8 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup WWDG_LL_Exported_Macros WWDG Exported Macros
+  * @{
+  */
+/** @defgroup WWDG_LL_EM_WRITE_READ Common Write and read registers macros
+  * @{
+  */
+/**
+  * @brief  Write a value in WWDG register
+  * @param  __INSTANCE__ WWDG Instance
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_WWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in WWDG register
+  * @param  __INSTANCE__ WWDG Instance
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_WWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup WWDG_LL_Exported_Functions WWDG Exported Functions
+  * @{
+  */
+
+/** @defgroup WWDG_LL_EF_Configuration Configuration
+  * @{
+  */
+/**
+  * @brief  Enable Window Watchdog. The watchdog is always disabled after a reset.
+  * @note   It is enabled by setting the WDGA bit in the WWDG_CR register,
+  *         then it cannot be disabled again except by a reset.
+  *         This bit is set by software and only cleared by hardware after a reset.
+  *         When WDGA = 1, the watchdog can generate a reset.
+  * @rmtoll CR           WDGA          LL_WWDG_Enable
+  * @param  WWDGx WWDG Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_WWDG_Enable(WWDG_TypeDef *WWDGx)
+{
+  SET_BIT(WWDGx->CR, WWDG_CR_WDGA);
+}
+
+/**
+  * @brief  Checks if Window Watchdog is enabled
+  * @rmtoll CR           WDGA          LL_WWDG_IsEnabled
+  * @param  WWDGx WWDG Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_WWDG_IsEnabled(WWDG_TypeDef *WWDGx)
+{
+  return ((READ_BIT(WWDGx->CR, WWDG_CR_WDGA) == (WWDG_CR_WDGA)) ? 1UL : 0UL);
+}
+
+/**
+  * @brief  Set the Watchdog counter value to provided value (7-bits T[6:0])
+  * @note   When writing to the WWDG_CR register, always write 1 in the MSB b6 to avoid generating an immediate reset
+  *         This counter is decremented every (4096 x 2expWDGTB) PCLK cycles
+  *         A reset is produced when it rolls over from 0x40 to 0x3F (bit T6 becomes cleared)
+  *         Setting the counter lower then 0x40 causes an immediate reset (if WWDG enabled)
+  * @rmtoll CR           T             LL_WWDG_SetCounter
+  * @param  WWDGx WWDG Instance
+  * @param  Counter 0..0x7F (7 bit counter value)
+  * @retval None
+  */
+__STATIC_INLINE void LL_WWDG_SetCounter(WWDG_TypeDef *WWDGx, uint32_t Counter)
+{
+  MODIFY_REG(WWDGx->CR, WWDG_CR_T, Counter);
+}
+
+/**
+  * @brief  Return current Watchdog Counter Value (7 bits counter value)
+  * @rmtoll CR           T             LL_WWDG_GetCounter
+  * @param  WWDGx WWDG Instance
+  * @retval 7 bit Watchdog Counter value
+  */
+__STATIC_INLINE uint32_t LL_WWDG_GetCounter(WWDG_TypeDef *WWDGx)
+{
+  return (READ_BIT(WWDGx->CR, WWDG_CR_T));
+}
+
+/**
+  * @brief  Set the time base of the prescaler (WDGTB).
+  * @note   Prescaler is used to apply ratio on PCLK clock, so that Watchdog counter
+  *         is decremented every (4096 x 2expWDGTB) PCLK cycles
+  * @rmtoll CFR          WDGTB         LL_WWDG_SetPrescaler
+  * @param  WWDGx WWDG Instance
+  * @param  Prescaler This parameter can be one of the following values:
+  *         @arg @ref LL_WWDG_PRESCALER_1
+  *         @arg @ref LL_WWDG_PRESCALER_2
+  *         @arg @ref LL_WWDG_PRESCALER_4
+  *         @arg @ref LL_WWDG_PRESCALER_8
+  * @retval None
+  */
+__STATIC_INLINE void LL_WWDG_SetPrescaler(WWDG_TypeDef *WWDGx, uint32_t Prescaler)
+{
+  MODIFY_REG(WWDGx->CFR, WWDG_CFR_WDGTB, Prescaler);
+}
+
+/**
+  * @brief  Return current Watchdog Prescaler Value
+  * @rmtoll CFR          WDGTB         LL_WWDG_GetPrescaler
+  * @param  WWDGx WWDG Instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_WWDG_PRESCALER_1
+  *         @arg @ref LL_WWDG_PRESCALER_2
+  *         @arg @ref LL_WWDG_PRESCALER_4
+  *         @arg @ref LL_WWDG_PRESCALER_8
+  */
+__STATIC_INLINE uint32_t LL_WWDG_GetPrescaler(WWDG_TypeDef *WWDGx)
+{
+  return (READ_BIT(WWDGx->CFR, WWDG_CFR_WDGTB));
+}
+
+/**
+  * @brief  Set the Watchdog Window value to be compared to the downcounter (7-bits W[6:0]).
+  * @note   This window value defines when write in the WWDG_CR register
+  *         to program Watchdog counter is allowed.
+  *         Watchdog counter value update must occur only when the counter value
+  *         is lower than the Watchdog window register value.
+  *         Otherwise, a MCU reset is generated if the 7-bit Watchdog counter value
+  *         (in the control register) is refreshed before the downcounter has reached
+  *         the watchdog window register value.
+  *         Physically is possible to set the Window lower then 0x40 but it is not recommended.
+  *         To generate an immediate reset, it is possible to set the Counter lower than 0x40.
+  * @rmtoll CFR          W             LL_WWDG_SetWindow
+  * @param  WWDGx WWDG Instance
+  * @param  Window 0x00..0x7F (7 bit Window value)
+  * @retval None
+  */
+__STATIC_INLINE void LL_WWDG_SetWindow(WWDG_TypeDef *WWDGx, uint32_t Window)
+{
+  MODIFY_REG(WWDGx->CFR, WWDG_CFR_W, Window);
+}
+
+/**
+  * @brief  Return current Watchdog Window Value (7 bits value)
+  * @rmtoll CFR          W             LL_WWDG_GetWindow
+  * @param  WWDGx WWDG Instance
+  * @retval 7 bit Watchdog Window value
+  */
+__STATIC_INLINE uint32_t LL_WWDG_GetWindow(WWDG_TypeDef *WWDGx)
+{
+  return (READ_BIT(WWDGx->CFR, WWDG_CFR_W));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_LL_EF_FLAG_Management FLAG_Management
+  * @{
+  */
+/**
+  * @brief  Indicates if the WWDG Early Wakeup Interrupt Flag is set or not.
+  * @note   This bit is set by hardware when the counter has reached the value 0x40.
+  *         It must be cleared by software by writing 0.
+  *         A write of 1 has no effect. This bit is also set if the interrupt is not enabled.
+  * @rmtoll SR           EWIF          LL_WWDG_IsActiveFlag_EWKUP
+  * @param  WWDGx WWDG Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_WWDG_IsActiveFlag_EWKUP(WWDG_TypeDef *WWDGx)
+{
+  return ((READ_BIT(WWDGx->SR, WWDG_SR_EWIF) == (WWDG_SR_EWIF)) ? 1UL : 0UL);  
+}
+
+/**
+  * @brief  Clear WWDG Early Wakeup Interrupt Flag (EWIF)
+  * @rmtoll SR           EWIF          LL_WWDG_ClearFlag_EWKUP
+  * @param  WWDGx WWDG Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_WWDG_ClearFlag_EWKUP(WWDG_TypeDef *WWDGx)
+{
+  WRITE_REG(WWDGx->SR, ~WWDG_SR_EWIF);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_LL_EF_IT_Management IT_Management
+  * @{
+  */
+/**
+  * @brief  Enable the Early Wakeup Interrupt.
+  * @note   When set, an interrupt occurs whenever the counter reaches value 0x40.
+  *         This interrupt is only cleared by hardware after a reset
+  * @rmtoll CFR          EWI           LL_WWDG_EnableIT_EWKUP
+  * @param  WWDGx WWDG Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_WWDG_EnableIT_EWKUP(WWDG_TypeDef *WWDGx)
+{
+  SET_BIT(WWDGx->CFR, WWDG_CFR_EWI);
+}
+
+/**
+  * @brief  Check if Early Wakeup Interrupt is enabled
+  * @rmtoll CFR          EWI           LL_WWDG_IsEnabledIT_EWKUP
+  * @param  WWDGx WWDG Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_WWDG_IsEnabledIT_EWKUP(WWDG_TypeDef *WWDGx)
+{
+  return ((READ_BIT(WWDGx->CFR, WWDG_CFR_EWI) == (WWDG_CFR_EWI)) ? 1UL : 0UL);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* WWDG */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_LL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_adc.c

@@ -0,0 +1,886 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_adc.c
+  * @author  MCD Application Team
+  * @brief   ADC LL module driver
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_adc.h"
+#include "stm32f1xx_ll_bus.h"
+
+#ifdef  USE_FULL_ASSERT
+  #include "stm32_assert.h"
+#else
+  #define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (ADC1) || defined (ADC2) || defined (ADC3)
+
+/** @addtogroup ADC_LL ADC
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+
+/** @addtogroup ADC_LL_Private_Macros
+  * @{
+  */
+
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* common to several ADC instances.                                           */
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* ADC instance.                                                              */
+#define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__)                                   \
+  (   ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT)                            \
+   || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT)                             \
+  )
+
+#define IS_LL_ADC_SCAN_SELECTION(__SCAN_SELECTION__)                           \
+  (   ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_DISABLE)                        \
+   || ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_ENABLE)                         \
+  )
+
+#define IS_LL_ADC_SEQ_SCAN_MODE(__SEQ_SCAN_MODE__)                             \
+  (   ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_DISABLE)                             \
+   || ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_ENABLE)                              \
+  )
+
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* ADC group regular                                                          */
+#if defined(ADC3)
+#define IS_LL_ADC_REG_TRIG_SOURCE(__ADC_INSTANCE__, __REG_TRIG_SOURCE__)       \
+  ((((__ADC_INSTANCE__) == ADC1) || ((__ADC_INSTANCE__) == ADC2))              \
+    ? (   ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE)                  \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO)             \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11)           \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_TRGO)             \
+      )                                                                        \
+      :                                                                        \
+      (   ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE)                  \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_CH1)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH3)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_CH1)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_TRGO_ADC3)        \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH1)              \
+       || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH3)              \
+      )                                                                        \
+  )
+#else
+#if defined (STM32F101xE) || defined (STM32F105xC) || defined (STM32F107xC)
+#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__)                         \
+  (   ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE)                      \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO)                 \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11)               \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_TRGO)                 \
+  )
+#else
+#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__)                         \
+  (   ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE)                      \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO)                 \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11)               \
+  )
+#endif
+#endif
+#define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__)                 \
+  (   ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE)                    \
+   || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS)                \
+  )
+
+#define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__)                       \
+  (   ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE)                 \
+   || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED)            \
+  )
+
+#define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__)                 \
+  (   ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE)               \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS)        \
+  )
+
+#define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__)          \
+  (   ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE)           \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK)             \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_2RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_3RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_4RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_5RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_6RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_7RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_8RANKS)            \
+  )
+
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* ADC group injected                                                         */
+#if defined(ADC3)
+#define IS_LL_ADC_INJ_TRIG_SOURCE(__ADC_INSTANCE__, __INJ_TRIG_SOURCE__)       \
+  ((((__ADC_INSTANCE__) == ADC1) || ((__ADC_INSTANCE__) == ADC2))              \
+    ? (   ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE)                  \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO)             \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4)              \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO)             \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1)              \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4)              \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO)             \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15)           \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH4)              \
+      )                                                                        \
+      :                                                                        \
+      (   ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE)                  \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO)             \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4)              \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH3)              \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH2)              \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH4_ADC3)         \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_TRGO)             \
+       || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_CH4)              \
+      )                                                                        \
+  )
+#else
+#if defined (STM32F101xE) || defined (STM32F105xC) || defined (STM32F107xC)
+#define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__)                         \
+  (   ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE)                      \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15)               \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH4)                  \
+  )
+#else
+#define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__)                         \
+  (   ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE)                      \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15)               \
+  )
+#endif
+#endif
+#define IS_LL_ADC_INJ_TRIG_AUTO(__INJ_TRIG_AUTO__)                             \
+  (   ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_INDEPENDENT)                     \
+   || ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_FROM_GRP_REGULAR)                \
+  )
+
+#define IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(__INJ_SEQ_SCAN_LENGTH__)                 \
+  (   ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_DISABLE)               \
+   || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS)         \
+   || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS)         \
+   || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS)         \
+  )
+
+#define IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(__INJ_SEQ_DISCONT_MODE__)          \
+  (   ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_DISABLE)           \
+   || ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_1RANK)             \
+  )
+
+#if defined(ADC_MULTIMODE_SUPPORT)
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* multimode.                                                                 */
+#define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__)                                   \
+  (   ((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT)                           \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL_FAST)                  \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL_SLOW)                  \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM)                  \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT)                  \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTFAST_INJ_SIM)              \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTSLOW_INJ_SIM)              \
+  )
+
+#define IS_LL_ADC_MULTI_MASTER_SLAVE(__MULTI_MASTER_SLAVE__)                   \
+  (   ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER)                        \
+   || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_SLAVE)                         \
+   || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER_SLAVE)                  \
+  )
+
+#endif /* ADC_MULTIMODE_SUPPORT */
+/**
+  * @}
+  */
+
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup ADC_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize registers of all ADC instances belonging to
+  *         the same ADC common instance to their default reset values.
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC common registers are de-initialized
+  *          - ERROR: not applicable
+  */
+ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON));
+  
+  /* Force reset of ADC clock (core clock) */
+  LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC1);
+  
+  /* Release reset of ADC clock (core clock) */
+  LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC1);
+  
+  return SUCCESS;
+}
+
+/**
+  * @brief  Initialize some features of ADC common parameters
+  *         (all ADC instances belonging to the same ADC common instance)
+  *         and multimode (for devices with several ADC instances available).
+  * @note   The setting of ADC common parameters is conditioned to
+  *         ADC instances state:
+  *         All ADC instances belonging to the same ADC common instance
+  *         must be disabled.
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @param  ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC common registers are initialized
+  *          - ERROR: ADC common registers are not initialized
+  */
+ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON));
+#if defined(ADC_MULTIMODE_SUPPORT)
+  assert_param(IS_LL_ADC_MULTI_MODE(ADC_CommonInitStruct->Multimode));
+#endif /* ADC_MULTIMODE_SUPPORT */
+
+  /* Note: Hardware constraint (refer to description of functions             */
+  /*       "LL_ADC_SetCommonXXX()" and "LL_ADC_SetMultiXXX()"):               */
+  /*       On this STM32 serie, setting of these features is conditioned to   */
+  /*       ADC state:                                                         */
+  /*       All ADC instances of the ADC common group must be disabled.        */
+  if(__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0U)
+  {
+    /* Configuration of ADC hierarchical scope:                               */
+    /*  - common to several ADC                                               */
+    /*    (all ADC instances belonging to the same ADC common instance)       */
+    /*  - multimode (if several ADC instances available on the                */
+    /*    selected device)                                                    */
+    /*    - Set ADC multimode configuration                                   */
+    /*    - Set ADC multimode DMA transfer                                    */
+    /*    - Set ADC multimode: delay between 2 sampling phases                */
+#if defined(ADC_MULTIMODE_SUPPORT)
+    if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT)
+    {
+      MODIFY_REG(ADCxy_COMMON->CR1,
+                 ADC_CR1_DUALMOD,
+                 ADC_CommonInitStruct->Multimode
+                );
+    }
+    else
+    {
+      MODIFY_REG(ADCxy_COMMON->CR1,
+                 ADC_CR1_DUALMOD,
+                 LL_ADC_MULTI_INDEPENDENT
+                );
+    }
+#endif
+  }
+  else
+  {
+    /* Initialization error: One or several ADC instances belonging to        */
+    /* the same ADC common instance are not disabled.                         */
+    status = ERROR;
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_ADC_CommonInitTypeDef field to default value.
+  * @param  ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
+  *                              whose fields will be set to default values.
+  * @retval None
+  */
+void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
+{
+  /* Set ADC_CommonInitStruct fields to default values */
+  /* Set fields of ADC common */
+  /* (all ADC instances belonging to the same ADC common instance) */
+  
+#if defined(ADC_MULTIMODE_SUPPORT)
+  /* Set fields of ADC multimode */
+  ADC_CommonInitStruct->Multimode             = LL_ADC_MULTI_INDEPENDENT;
+#endif /* ADC_MULTIMODE_SUPPORT */
+}
+
+/**
+  * @brief  De-initialize registers of the selected ADC instance
+  *         to their default reset values.
+  * @note   To reset all ADC instances quickly (perform a hard reset),
+  *         use function @ref LL_ADC_CommonDeInit().
+  * @param  ADCx ADC instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC registers are de-initialized
+  *          - ERROR: ADC registers are not de-initialized
+  */
+ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(ADCx));
+  
+  /* Disable ADC instance if not already disabled.                            */
+  if(LL_ADC_IsEnabled(ADCx) == 1U)
+  {
+    /* Set ADC group regular trigger source to SW start to ensure to not      */
+    /* have an external trigger event occurring during the conversion stop    */
+    /* ADC disable process.                                                   */
+    LL_ADC_REG_SetTriggerSource(ADCx, LL_ADC_REG_TRIG_SOFTWARE);
+    
+    /* Set ADC group injected trigger source to SW start to ensure to not     */
+    /* have an external trigger event occurring during the conversion stop    */
+    /* ADC disable process.                                                   */
+    LL_ADC_INJ_SetTriggerSource(ADCx, LL_ADC_INJ_TRIG_SOFTWARE);
+    
+    /* Disable the ADC instance */
+    LL_ADC_Disable(ADCx);
+  }
+  
+  /* Check whether ADC state is compliant with expected state */
+  /* (hardware requirements of bits state to reset registers below) */
+  if(READ_BIT(ADCx->CR2, ADC_CR2_ADON) == 0U)
+  {
+    /* ========== Reset ADC registers ========== */
+    /* Reset register SR */
+    CLEAR_BIT(ADCx->SR,
+              (  LL_ADC_FLAG_STRT
+               | LL_ADC_FLAG_JSTRT
+               | LL_ADC_FLAG_EOS
+               | LL_ADC_FLAG_JEOS
+               | LL_ADC_FLAG_AWD1 )
+             );
+    
+    /* Reset register CR1 */
+  #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+
+    CLEAR_BIT(ADCx->CR1,
+              (  ADC_CR1_AWDEN   | ADC_CR1_JAWDEN  | ADC_CR1_DUALMOD
+               | ADC_CR1_DISCNUM | ADC_CR1_JDISCEN | ADC_CR1_DISCEN
+               | ADC_CR1_JAUTO   | ADC_CR1_AWDSGL  | ADC_CR1_SCAN
+               | ADC_CR1_JEOCIE  | ADC_CR1_AWDIE   | ADC_CR1_EOCIE
+               | ADC_CR1_AWDCH                                     )
+             );
+  #else 
+
+    CLEAR_BIT(ADCx->CR1,
+              (  ADC_CR1_AWDEN   | ADC_CR1_JAWDEN  | ADC_CR1_DISCNUM 
+               | ADC_CR1_JDISCEN | ADC_CR1_DISCEN  | ADC_CR1_JAUTO
+               | ADC_CR1_AWDSGL  | ADC_CR1_SCAN    | ADC_CR1_JEOCIE  
+               | ADC_CR1_AWDIE   | ADC_CR1_EOCIE   | ADC_CR1_AWDCH )
+             );
+  #endif
+    
+    /* Reset register CR2 */
+    CLEAR_BIT(ADCx->CR2,
+              (  ADC_CR2_TSVREFE
+               | ADC_CR2_SWSTART  | ADC_CR2_EXTTRIG  | ADC_CR2_EXTSEL
+               | ADC_CR2_JSWSTART | ADC_CR2_JEXTTRIG | ADC_CR2_JEXTSEL
+               | ADC_CR2_ALIGN    | ADC_CR2_DMA
+               | ADC_CR2_RSTCAL   | ADC_CR2_CAL
+               | ADC_CR2_CONT     | ADC_CR2_ADON                      )
+             );
+    
+    /* Reset register SMPR1 */
+    CLEAR_BIT(ADCx->SMPR1,
+              (  ADC_SMPR1_SMP17 | ADC_SMPR1_SMP16
+               | ADC_SMPR1_SMP15 | ADC_SMPR1_SMP14 | ADC_SMPR1_SMP13
+               | ADC_SMPR1_SMP12 | ADC_SMPR1_SMP11 | ADC_SMPR1_SMP10)
+             );
+    
+    /* Reset register SMPR2 */
+    CLEAR_BIT(ADCx->SMPR2,
+              (  ADC_SMPR2_SMP9
+               | ADC_SMPR2_SMP8 | ADC_SMPR2_SMP7 | ADC_SMPR2_SMP6
+               | ADC_SMPR2_SMP5 | ADC_SMPR2_SMP4 | ADC_SMPR2_SMP3
+               | ADC_SMPR2_SMP2 | ADC_SMPR2_SMP1 | ADC_SMPR2_SMP0)
+             );
+    
+    /* Reset register JOFR1 */
+    CLEAR_BIT(ADCx->JOFR1, ADC_JOFR1_JOFFSET1);
+    /* Reset register JOFR2 */
+    CLEAR_BIT(ADCx->JOFR2, ADC_JOFR2_JOFFSET2);
+    /* Reset register JOFR3 */
+    CLEAR_BIT(ADCx->JOFR3, ADC_JOFR3_JOFFSET3);
+    /* Reset register JOFR4 */
+    CLEAR_BIT(ADCx->JOFR4, ADC_JOFR4_JOFFSET4);
+    
+    /* Reset register HTR */
+    SET_BIT(ADCx->HTR, ADC_HTR_HT);
+    /* Reset register LTR */
+    CLEAR_BIT(ADCx->LTR, ADC_LTR_LT);
+    
+    /* Reset register SQR1 */
+    CLEAR_BIT(ADCx->SQR1,
+              (  ADC_SQR1_L
+               | ADC_SQR1_SQ16
+               | ADC_SQR1_SQ15 | ADC_SQR1_SQ14 | ADC_SQR1_SQ13)
+             );
+             
+    /* Reset register SQR2 */
+    CLEAR_BIT(ADCx->SQR2,
+              (  ADC_SQR2_SQ12 | ADC_SQR2_SQ11 | ADC_SQR2_SQ10
+               | ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7)
+             );
+    
+    
+    /* Reset register JSQR */
+    CLEAR_BIT(ADCx->JSQR,
+              (  ADC_JSQR_JL
+               | ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3
+               | ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1  )
+             );
+    
+    /* Reset register DR */
+    /* bits in access mode read only, no direct reset applicable */
+    
+    /* Reset registers JDR1, JDR2, JDR3, JDR4 */
+    /* bits in access mode read only, no direct reset applicable */
+    
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Initialize some features of ADC instance.
+  * @note   These parameters have an impact on ADC scope: ADC instance.
+  *         Affects both group regular and group injected (availability
+  *         of ADC group injected depends on STM32 families).
+  *         Refer to corresponding unitary functions into
+  *         @ref ADC_LL_EF_Configuration_ADC_Instance .
+  * @note   The setting of these parameters by function @ref LL_ADC_Init()
+  *         is conditioned to ADC state:
+  *         ADC instance must be disabled.
+  *         This condition is applied to all ADC features, for efficiency
+  *         and compatibility over all STM32 families. However, the different
+  *         features can be set under different ADC state conditions
+  *         (setting possible with ADC enabled without conversion on going,
+  *         ADC enabled with conversion on going, ...)
+  *         Each feature can be updated afterwards with a unitary function
+  *         and potentially with ADC in a different state than disabled,
+  *         refer to description of each function for setting
+  *         conditioned to ADC state.
+  * @note   After using this function, some other features must be configured
+  *         using LL unitary functions.
+  *         The minimum configuration remaining to be done is:
+  *          - Set ADC group regular or group injected sequencer:
+  *            map channel on the selected sequencer rank.
+  *            Refer to function @ref LL_ADC_REG_SetSequencerRanks().
+  *          - Set ADC channel sampling time
+  *            Refer to function LL_ADC_SetChannelSamplingTime();
+  * @param  ADCx ADC instance
+  * @param  ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC registers are initialized
+  *          - ERROR: ADC registers are not initialized
+  */
+ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(ADCx));
+  
+  assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment));
+  assert_param(IS_LL_ADC_SCAN_SELECTION(ADC_InitStruct->SequencersScanMode));
+  
+  /* Note: Hardware constraint (refer to description of this function):       */
+  /*       ADC instance must be disabled.                                     */
+  if(LL_ADC_IsEnabled(ADCx) == 0U)
+  {
+    /* Configuration of ADC hierarchical scope:                               */
+    /*  - ADC instance                                                        */
+    /*    - Set ADC conversion data alignment                                 */
+    MODIFY_REG(ADCx->CR1,
+                 ADC_CR1_SCAN
+              ,
+                 ADC_InitStruct->SequencersScanMode
+              );
+    
+    MODIFY_REG(ADCx->CR2,
+                 ADC_CR2_ALIGN
+              ,
+                 ADC_InitStruct->DataAlignment
+              );
+
+  }
+  else
+  {
+    /* Initialization error: ADC instance is not disabled. */
+    status = ERROR;
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_ADC_InitTypeDef field to default value.
+  * @param  ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure
+  *                        whose fields will be set to default values.
+  * @retval None
+  */
+void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct)
+{
+  /* Set ADC_InitStruct fields to default values */
+  /* Set fields of ADC instance */
+  ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
+  
+  /* Enable scan mode to have a generic behavior with ADC of other            */
+  /* STM32 families, without this setting available:                          */
+  /* ADC group regular sequencer and ADC group injected sequencer depend      */
+  /* only of their own configuration.                                         */
+  ADC_InitStruct->SequencersScanMode      = LL_ADC_SEQ_SCAN_ENABLE;
+  
+}
+
+/**
+  * @brief  Initialize some features of ADC group regular.
+  * @note   These parameters have an impact on ADC scope: ADC group regular.
+  *         Refer to corresponding unitary functions into
+  *         @ref ADC_LL_EF_Configuration_ADC_Group_Regular
+  *         (functions with prefix "REG").
+  * @note   The setting of these parameters by function @ref LL_ADC_Init()
+  *         is conditioned to ADC state:
+  *         ADC instance must be disabled.
+  *         This condition is applied to all ADC features, for efficiency
+  *         and compatibility over all STM32 families. However, the different
+  *         features can be set under different ADC state conditions
+  *         (setting possible with ADC enabled without conversion on going,
+  *         ADC enabled with conversion on going, ...)
+  *         Each feature can be updated afterwards with a unitary function
+  *         and potentially with ADC in a different state than disabled,
+  *         refer to description of each function for setting
+  *         conditioned to ADC state.
+  * @note   After using this function, other features must be configured
+  *         using LL unitary functions.
+  *         The minimum configuration remaining to be done is:
+  *          - Set ADC group regular or group injected sequencer:
+  *            map channel on the selected sequencer rank.
+  *            Refer to function @ref LL_ADC_REG_SetSequencerRanks().
+  *          - Set ADC channel sampling time
+  *            Refer to function LL_ADC_SetChannelSamplingTime();
+  * @param  ADCx ADC instance
+  * @param  ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC registers are initialized
+  *          - ERROR: ADC registers are not initialized
+  */
+ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(ADCx));
+#if defined(ADC3)
+  assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADCx, ADC_REG_InitStruct->TriggerSource));
+#else
+  assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource));
+#endif
+  assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength));
+  if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+  {
+    assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont));
+  }
+  assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode));
+  assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer));
+  
+  /* Note: Hardware constraint (refer to description of this function):       */
+  /*       ADC instance must be disabled.                                     */
+  if(LL_ADC_IsEnabled(ADCx) == 0U)
+  {
+    /* Configuration of ADC hierarchical scope:                               */
+    /*  - ADC group regular                                                   */
+    /*    - Set ADC group regular trigger source                              */
+    /*    - Set ADC group regular sequencer length                            */
+    /*    - Set ADC group regular sequencer discontinuous mode                */
+    /*    - Set ADC group regular continuous mode                             */
+    /*    - Set ADC group regular conversion data transfer: no transfer or    */
+    /*      transfer by DMA, and DMA requests mode                            */
+    /* Note: On this STM32 serie, ADC trigger edge is set when starting       */
+    /*       ADC conversion.                                                  */
+    /*       Refer to function @ref LL_ADC_REG_StartConversionExtTrig().      */
+    if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+    {
+      MODIFY_REG(ADCx->CR1,
+                   ADC_CR1_DISCEN
+                 | ADC_CR1_DISCNUM
+                ,
+                   ADC_REG_InitStruct->SequencerLength
+                 | ADC_REG_InitStruct->SequencerDiscont
+                );
+    }
+    else
+    {
+      MODIFY_REG(ADCx->CR1,
+                   ADC_CR1_DISCEN
+                 | ADC_CR1_DISCNUM
+                ,
+                   ADC_REG_InitStruct->SequencerLength
+                 | LL_ADC_REG_SEQ_DISCONT_DISABLE
+                );
+    }
+    
+    MODIFY_REG(ADCx->CR2,
+                 ADC_CR2_EXTSEL
+               | ADC_CR2_CONT
+               | ADC_CR2_DMA
+              ,
+                 ADC_REG_InitStruct->TriggerSource
+               | ADC_REG_InitStruct->ContinuousMode
+               | ADC_REG_InitStruct->DMATransfer
+              );
+
+    /* Set ADC group regular sequencer length and scan direction */
+    /* Note: Hardware constraint (refer to description of this function):     */
+    /* Note: If ADC instance feature scan mode is disabled                    */
+    /*       (refer to  ADC instance initialization structure                 */
+    /*       parameter @ref SequencersScanMode                                */
+    /*       or function @ref LL_ADC_SetSequencersScanMode() ),               */
+    /*       this parameter is discarded.                                     */
+    LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength);
+  }
+  else
+  {
+    /* Initialization error: ADC instance is not disabled. */
+    status = ERROR;
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_ADC_REG_InitTypeDef field to default value.
+  * @param  ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+  *                            whose fields will be set to default values.
+  * @retval None
+  */
+void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct)
+{
+  /* Set ADC_REG_InitStruct fields to default values */
+  /* Set fields of ADC group regular */
+  /* Note: On this STM32 serie, ADC trigger edge is set when starting         */
+  /*       ADC conversion.                                                    */
+  /*       Refer to function @ref LL_ADC_REG_StartConversionExtTrig().        */
+  ADC_REG_InitStruct->TriggerSource    = LL_ADC_REG_TRIG_SOFTWARE;
+  ADC_REG_InitStruct->SequencerLength  = LL_ADC_REG_SEQ_SCAN_DISABLE;
+  ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
+  ADC_REG_InitStruct->ContinuousMode   = LL_ADC_REG_CONV_SINGLE;
+  ADC_REG_InitStruct->DMATransfer      = LL_ADC_REG_DMA_TRANSFER_NONE;
+}
+
+/**
+  * @brief  Initialize some features of ADC group injected.
+  * @note   These parameters have an impact on ADC scope: ADC group injected.
+  *         Refer to corresponding unitary functions into
+  *         @ref ADC_LL_EF_Configuration_ADC_Group_Regular
+  *         (functions with prefix "INJ").
+  * @note   The setting of these parameters by function @ref LL_ADC_Init()
+  *         is conditioned to ADC state:
+  *         ADC instance must be disabled.
+  *         This condition is applied to all ADC features, for efficiency
+  *         and compatibility over all STM32 families. However, the different
+  *         features can be set under different ADC state conditions
+  *         (setting possible with ADC enabled without conversion on going,
+  *         ADC enabled with conversion on going, ...)
+  *         Each feature can be updated afterwards with a unitary function
+  *         and potentially with ADC in a different state than disabled,
+  *         refer to description of each function for setting
+  *         conditioned to ADC state.
+  * @note   After using this function, other features must be configured
+  *         using LL unitary functions.
+  *         The minimum configuration remaining to be done is:
+  *          - Set ADC group injected sequencer:
+  *            map channel on the selected sequencer rank.
+  *            Refer to function @ref LL_ADC_INJ_SetSequencerRanks().
+  *          - Set ADC channel sampling time
+  *            Refer to function LL_ADC_SetChannelSamplingTime();
+  * @param  ADCx ADC instance
+  * @param  ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC registers are initialized
+  *          - ERROR: ADC registers are not initialized
+  */
+ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(ADCx));
+#if defined(ADC3)
+  assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADCx, ADC_INJ_InitStruct->TriggerSource));
+#else
+  assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADC_INJ_InitStruct->TriggerSource));
+#endif
+  assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(ADC_INJ_InitStruct->SequencerLength));
+  if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE)
+  {
+    assert_param(IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(ADC_INJ_InitStruct->SequencerDiscont));
+  }
+  assert_param(IS_LL_ADC_INJ_TRIG_AUTO(ADC_INJ_InitStruct->TrigAuto));
+  
+  /* Note: Hardware constraint (refer to description of this function):       */
+  /*       ADC instance must be disabled.                                     */
+  if(LL_ADC_IsEnabled(ADCx) == 0U)
+  {
+    /* Configuration of ADC hierarchical scope:                               */
+    /*  - ADC group injected                                                  */
+    /*    - Set ADC group injected trigger source                             */
+    /*    - Set ADC group injected sequencer length                           */
+    /*    - Set ADC group injected sequencer discontinuous mode               */
+    /*    - Set ADC group injected conversion trigger: independent or         */
+    /*      from ADC group regular                                            */
+    /* Note: On this STM32 serie, ADC trigger edge is set when starting       */
+    /*       ADC conversion.                                                  */
+    /*       Refer to function @ref LL_ADC_INJ_StartConversionExtTrig().      */
+    if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+    {
+      MODIFY_REG(ADCx->CR1,
+                   ADC_CR1_JDISCEN
+                 | ADC_CR1_JAUTO
+                ,
+                   ADC_INJ_InitStruct->SequencerDiscont
+                 | ADC_INJ_InitStruct->TrigAuto
+                );
+    }
+    else
+    {
+      MODIFY_REG(ADCx->CR1,
+                   ADC_CR1_JDISCEN
+                 | ADC_CR1_JAUTO
+                ,
+                   LL_ADC_REG_SEQ_DISCONT_DISABLE
+                 | ADC_INJ_InitStruct->TrigAuto
+                );
+    }
+    
+    MODIFY_REG(ADCx->CR2,
+               ADC_CR2_JEXTSEL
+              ,
+               ADC_INJ_InitStruct->TriggerSource
+              );
+    
+    /* Note: Hardware constraint (refer to description of this function):     */
+    /* Note: If ADC instance feature scan mode is disabled                    */
+    /*       (refer to  ADC instance initialization structure                 */
+    /*       parameter @ref SequencersScanMode                                */
+    /*       or function @ref LL_ADC_SetSequencersScanMode() ),               */
+    /*       this parameter is discarded.                                     */
+    LL_ADC_INJ_SetSequencerLength(ADCx, ADC_INJ_InitStruct->SequencerLength);
+  }
+  else
+  {
+    /* Initialization error: ADC instance is not disabled. */
+    status = ERROR;
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_ADC_INJ_InitTypeDef field to default value.
+  * @param  ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure
+  *                            whose fields will be set to default values.
+  * @retval None
+  */
+void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct)
+{
+  /* Set ADC_INJ_InitStruct fields to default values */
+  /* Set fields of ADC group injected */
+  ADC_INJ_InitStruct->TriggerSource    = LL_ADC_INJ_TRIG_SOFTWARE;
+  ADC_INJ_InitStruct->SequencerLength  = LL_ADC_INJ_SEQ_SCAN_DISABLE;
+  ADC_INJ_InitStruct->SequencerDiscont = LL_ADC_INJ_SEQ_DISCONT_DISABLE;
+  ADC_INJ_InitStruct->TrigAuto         = LL_ADC_INJ_TRIG_INDEPENDENT;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* ADC1 || ADC2 || ADC3 */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_crc.c

@@ -0,0 +1,108 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_crc.c
+  * @author  MCD Application Team
+  * @brief   CRC LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_crc.h"
+#include "stm32f1xx_ll_bus.h"
+
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (CRC)
+
+/** @addtogroup CRC_LL
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRC_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CRC_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize CRC registers (Registers restored to their default values).
+  * @param  CRCx CRC Instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: CRC registers are de-initialized
+  *          - ERROR: CRC registers are not de-initialized
+  */
+ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx)
+{
+  ErrorStatus status = SUCCESS;
+
+  /* Check the parameters */
+  assert_param(IS_CRC_ALL_INSTANCE(CRCx));
+
+  if (CRCx == CRC)
+  {
+
+    /* Reset the CRC calculation unit */
+    LL_CRC_ResetCRCCalculationUnit(CRCx);
+
+    /* Reset IDR register */
+    LL_CRC_Write_IDR(CRCx, 0x00U);
+  }
+  else
+  {
+    status = ERROR;
+  }
+
+  return (status);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined (CRC) */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

LLDrivers/src/stm32f1xx_ll_dac.c

@@ -0,0 +1,274 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_dac.c
+  * @author  MCD Application Team
+  * @brief   DAC LL module driver
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_dac.h"
+#include "stm32f1xx_ll_bus.h"
+
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined(DAC)
+
+/** @addtogroup DAC_LL DAC
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+
+/** @addtogroup DAC_LL_Private_Macros
+  * @{
+  */
+#define IS_LL_DAC_CHANNEL(__DAC_CHANNEL__)                                     \
+  (                                                                            \
+      ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_1)                                  \
+   || ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_2)                                  \
+  )
+
+#define IS_LL_DAC_TRIGGER_SOURCE(__TRIGGER_SOURCE__)                           \
+  (   ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_SOFTWARE)                           \
+   || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM3_TRGO)                      \
+   || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM15_TRGO)                     \
+   || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM2_TRGO)                      \
+   || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM4_TRGO)                      \
+   || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM5_TRGO)                      \
+   || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM6_TRGO)                      \
+   || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM7_TRGO)                      \
+   || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM8_TRGO)                      \
+   || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_EXTI_LINE9)                     \
+  )
+
+#define IS_LL_DAC_WAVE_AUTO_GENER_MODE(__WAVE_AUTO_GENERATION_MODE__)           \
+  (   ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NONE)     \
+   || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NOISE)    \
+   || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE) \
+  )
+
+#define IS_LL_DAC_WAVE_AUTO_GENER_CONFIG(__WAVE_AUTO_GENERATION_MODE__, __WAVE_AUTO_GENERATION_CONFIG__)  \
+  ( (((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NOISE)                               \
+    && (  ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BIT0)                            \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS1_0)                         \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS2_0)                         \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS3_0)                         \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS4_0)                         \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS5_0)                         \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS6_0)                         \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS7_0)                         \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS8_0)                         \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS9_0)                         \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS10_0)                        \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS11_0))                       \
+    )                                                                                                     \
+  ||(((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE)                            \
+    && (  ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_1)                              \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_3)                              \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_7)                              \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_15)                             \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_31)                             \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_63)                             \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_127)                            \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_255)                            \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_511)                            \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_1023)                           \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_2047)                           \
+       || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_4095))                          \
+    )                                                                                                     \
+  )
+
+#define IS_LL_DAC_OUTPUT_BUFFER(__OUTPUT_BUFFER__)                             \
+  (   ((__OUTPUT_BUFFER__) == LL_DAC_OUTPUT_BUFFER_ENABLE)                     \
+   || ((__OUTPUT_BUFFER__) == LL_DAC_OUTPUT_BUFFER_DISABLE)                    \
+  )
+
+/**
+  * @}
+  */
+
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DAC_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DAC_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize registers of the selected DAC instance
+  *         to their default reset values.
+  * @param  DACx DAC instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: DAC registers are de-initialized
+  *          - ERROR: not applicable
+  */
+ErrorStatus LL_DAC_DeInit(DAC_TypeDef *DACx)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_ALL_INSTANCE(DACx));
+
+  /* Force reset of DAC clock */
+  LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_DAC1);
+
+  /* Release reset of DAC clock */
+  LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_DAC1);
+
+  return SUCCESS;
+}
+
+/**
+  * @brief  Initialize some features of DAC channel.
+  * @note   @ref LL_DAC_Init() aims to ease basic configuration of a DAC channel.
+  *         Leaving it ready to be enabled and output:
+  *         a level by calling one of
+  *           @ref LL_DAC_ConvertData12RightAligned
+  *           @ref LL_DAC_ConvertData12LeftAligned
+  *           @ref LL_DAC_ConvertData8RightAligned
+  *         or one of the supported autogenerated wave.
+  * @note   This function allows configuration of:
+  *          - Output mode
+  *          - Trigger
+  *          - Wave generation
+  * @note   The setting of these parameters by function @ref LL_DAC_Init()
+  *         is conditioned to DAC state:
+  *         DAC channel must be disabled.
+  * @param  DACx DAC instance
+  * @param  DAC_Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DAC_CHANNEL_1
+  *         @arg @ref LL_DAC_CHANNEL_2
+  * @param  DAC_InitStruct Pointer to a @ref LL_DAC_InitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: DAC registers are initialized
+  *          - ERROR: DAC registers are not initialized
+  */
+ErrorStatus LL_DAC_Init(DAC_TypeDef *DACx, uint32_t DAC_Channel, LL_DAC_InitTypeDef *DAC_InitStruct)
+{
+  ErrorStatus status = SUCCESS;
+
+  /* Check the parameters */
+  assert_param(IS_DAC_ALL_INSTANCE(DACx));
+  assert_param(IS_LL_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_LL_DAC_TRIGGER_SOURCE(DAC_InitStruct->TriggerSource));
+  assert_param(IS_LL_DAC_OUTPUT_BUFFER(DAC_InitStruct->OutputBuffer));
+  assert_param(IS_LL_DAC_WAVE_AUTO_GENER_MODE(DAC_InitStruct->WaveAutoGeneration));
+  if (DAC_InitStruct->WaveAutoGeneration != LL_DAC_WAVE_AUTO_GENERATION_NONE)
+  {
+    assert_param(IS_LL_DAC_WAVE_AUTO_GENER_CONFIG(DAC_InitStruct->WaveAutoGeneration,
+                                                  DAC_InitStruct->WaveAutoGenerationConfig));
+  }
+
+  /* Note: Hardware constraint (refer to description of this function)        */
+  /*       DAC instance must be disabled.                                     */
+  if (LL_DAC_IsEnabled(DACx, DAC_Channel) == 0U)
+  {
+    /* Configuration of DAC channel:                                          */
+    /*  - TriggerSource                                                       */
+    /*  - WaveAutoGeneration                                                  */
+    /*  - OutputBuffer                                                        */
+    /*  - OutputMode                                                          */
+    if (DAC_InitStruct->WaveAutoGeneration != LL_DAC_WAVE_AUTO_GENERATION_NONE)
+    {
+      MODIFY_REG(DACx->CR,
+                 (DAC_CR_TSEL1
+                  | DAC_CR_WAVE1
+                  | DAC_CR_MAMP1
+                  | DAC_CR_BOFF1
+                 ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
+                 ,
+                 (DAC_InitStruct->TriggerSource
+                  | DAC_InitStruct->WaveAutoGeneration
+                  | DAC_InitStruct->WaveAutoGenerationConfig
+                  | DAC_InitStruct->OutputBuffer
+                 ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
+                );
+    }
+    else
+    {
+      MODIFY_REG(DACx->CR,
+                 (DAC_CR_TSEL1
+                  | DAC_CR_WAVE1
+                  | DAC_CR_BOFF1
+                 ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
+                 ,
+                 (DAC_InitStruct->TriggerSource
+                  | LL_DAC_WAVE_AUTO_GENERATION_NONE
+                  | DAC_InitStruct->OutputBuffer
+                 ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
+                );
+    }
+  }
+  else
+  {
+    /* Initialization error: DAC instance is not disabled.                    */
+    status = ERROR;
+  }
+  return status;
+}
+
+/**
+  * @brief Set each @ref LL_DAC_InitTypeDef field to default value.
+  * @param DAC_InitStruct pointer to a @ref LL_DAC_InitTypeDef structure
+  *                       whose fields will be set to default values.
+  * @retval None
+  */
+void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct)
+{
+  /* Set DAC_InitStruct fields to default values */
+  DAC_InitStruct->TriggerSource            = LL_DAC_TRIG_SOFTWARE;
+  DAC_InitStruct->WaveAutoGeneration       = LL_DAC_WAVE_AUTO_GENERATION_NONE;
+  /* Note: Parameter discarded if wave auto generation is disabled,           */
+  /*       set anyway to its default value.                                   */
+  DAC_InitStruct->WaveAutoGenerationConfig = LL_DAC_NOISE_LFSR_UNMASK_BIT0;
+  DAC_InitStruct->OutputBuffer             = LL_DAC_OUTPUT_BUFFER_ENABLE;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DAC */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_dma.c

@@ -0,0 +1,314 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_dma.c
+  * @author  MCD Application Team
+  * @brief   DMA LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_dma.h"
+#include "stm32f1xx_ll_bus.h"
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (DMA1) || defined (DMA2)
+
+/** @defgroup DMA_LL DMA
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup DMA_LL_Private_Macros
+  * @{
+  */
+#define IS_LL_DMA_DIRECTION(__VALUE__)          (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \
+                                                 ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \
+                                                 ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY))
+
+#define IS_LL_DMA_MODE(__VALUE__)               (((__VALUE__) == LL_DMA_MODE_NORMAL) || \
+                                                 ((__VALUE__) == LL_DMA_MODE_CIRCULAR))
+
+#define IS_LL_DMA_PERIPHINCMODE(__VALUE__)      (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \
+                                                 ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT))
+
+#define IS_LL_DMA_MEMORYINCMODE(__VALUE__)      (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \
+                                                 ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT))
+
+#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__)     (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE)      || \
+                                                 ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD)  || \
+                                                 ((__VALUE__) == LL_DMA_PDATAALIGN_WORD))
+
+#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__)     (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE)      || \
+                                                 ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD)  || \
+                                                 ((__VALUE__) == LL_DMA_MDATAALIGN_WORD))
+
+#define IS_LL_DMA_NBDATA(__VALUE__)             ((__VALUE__)  <= 0x0000FFFFU)
+
+#define IS_LL_DMA_PRIORITY(__VALUE__)           (((__VALUE__) == LL_DMA_PRIORITY_LOW)    || \
+                                                 ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \
+                                                 ((__VALUE__) == LL_DMA_PRIORITY_HIGH)   || \
+                                                 ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH))
+
+#if defined (DMA2)
+#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL)  ((((INSTANCE) == DMA1) && \
+                                                            (((CHANNEL) == LL_DMA_CHANNEL_1) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_2) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_3) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_4) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_5) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_6) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_7))) || \
+                                                            (((INSTANCE) == DMA2) && \
+                                                            (((CHANNEL) == LL_DMA_CHANNEL_1) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_2) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_3) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_4) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_5))))
+#else
+#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL)  ((((INSTANCE) == DMA1) && \
+                                                            (((CHANNEL) == LL_DMA_CHANNEL_1) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_2) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_3) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_4) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_5) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_6) || \
+                                                             ((CHANNEL) == LL_DMA_CHANNEL_7))))
+#endif
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DMA_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize the DMA registers to their default reset values.
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: DMA registers are de-initialized
+  *          - ERROR: DMA registers are not de-initialized
+  */
+uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  DMA_Channel_TypeDef *tmp = (DMA_Channel_TypeDef *)DMA1_Channel1;
+  ErrorStatus status = SUCCESS;
+
+  /* Check the DMA Instance DMAx and Channel parameters*/
+  assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel));
+
+  tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel));
+
+  /* Disable the selected DMAx_Channely */
+  CLEAR_BIT(tmp->CCR, DMA_CCR_EN);
+
+  /* Reset DMAx_Channely control register */
+  LL_DMA_WriteReg(tmp, CCR, 0U);
+
+  /* Reset DMAx_Channely remaining bytes register */
+  LL_DMA_WriteReg(tmp, CNDTR, 0U);
+
+  /* Reset DMAx_Channely peripheral address register */
+  LL_DMA_WriteReg(tmp, CPAR, 0U);
+
+  /* Reset DMAx_Channely memory address register */
+  LL_DMA_WriteReg(tmp, CMAR, 0U);
+
+  if (Channel == LL_DMA_CHANNEL_1)
+  {
+    /* Reset interrupt pending bits for DMAx Channel1 */
+    LL_DMA_ClearFlag_GI1(DMAx);
+  }
+  else if (Channel == LL_DMA_CHANNEL_2)
+  {
+    /* Reset interrupt pending bits for DMAx Channel2 */
+    LL_DMA_ClearFlag_GI2(DMAx);
+  }
+  else if (Channel == LL_DMA_CHANNEL_3)
+  {
+    /* Reset interrupt pending bits for DMAx Channel3 */
+    LL_DMA_ClearFlag_GI3(DMAx);
+  }
+  else if (Channel == LL_DMA_CHANNEL_4)
+  {
+    /* Reset interrupt pending bits for DMAx Channel4 */
+    LL_DMA_ClearFlag_GI4(DMAx);
+  }
+  else if (Channel == LL_DMA_CHANNEL_5)
+  {
+    /* Reset interrupt pending bits for DMAx Channel5 */
+    LL_DMA_ClearFlag_GI5(DMAx);
+  }
+
+  else if (Channel == LL_DMA_CHANNEL_6)
+  {
+    /* Reset interrupt pending bits for DMAx Channel6 */
+    LL_DMA_ClearFlag_GI6(DMAx);
+  }
+  else if (Channel == LL_DMA_CHANNEL_7)
+  {
+    /* Reset interrupt pending bits for DMAx Channel7 */
+    LL_DMA_ClearFlag_GI7(DMAx);
+  }
+  else
+  {
+    status = ERROR;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Initialize the DMA registers according to the specified parameters in DMA_InitStruct.
+  * @note   To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros :
+  *         @arg @ref __LL_DMA_GET_INSTANCE
+  *         @arg @ref __LL_DMA_GET_CHANNEL
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: DMA registers are initialized
+  *          - ERROR: Not applicable
+  */
+uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct)
+{
+  /* Check the DMA Instance DMAx and Channel parameters*/
+  assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel));
+
+  /* Check the DMA parameters from DMA_InitStruct */
+  assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction));
+  assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode));
+  assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode));
+  assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode));
+  assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize));
+  assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize));
+  assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData));
+  assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority));
+
+  /*---------------------------- DMAx CCR Configuration ------------------------
+   * Configure DMAx_Channely: data transfer direction, data transfer mode,
+   *                          peripheral and memory increment mode,
+   *                          data size alignment and  priority level with parameters :
+   * - Direction:      DMA_CCR_DIR and DMA_CCR_MEM2MEM bits
+   * - Mode:           DMA_CCR_CIRC bit
+   * - PeriphOrM2MSrcIncMode:  DMA_CCR_PINC bit
+   * - MemoryOrM2MDstIncMode:  DMA_CCR_MINC bit
+   * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits
+   * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits
+   * - Priority:               DMA_CCR_PL[1:0] bits
+   */
+  LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \
+                        DMA_InitStruct->Mode                   | \
+                        DMA_InitStruct->PeriphOrM2MSrcIncMode  | \
+                        DMA_InitStruct->MemoryOrM2MDstIncMode  | \
+                        DMA_InitStruct->PeriphOrM2MSrcDataSize | \
+                        DMA_InitStruct->MemoryOrM2MDstDataSize | \
+                        DMA_InitStruct->Priority);
+
+  /*-------------------------- DMAx CMAR Configuration -------------------------
+   * Configure the memory or destination base address with parameter :
+   * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits
+   */
+  LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress);
+
+  /*-------------------------- DMAx CPAR Configuration -------------------------
+   * Configure the peripheral or source base address with parameter :
+   * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits
+   */
+  LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress);
+
+  /*--------------------------- DMAx CNDTR Configuration -----------------------
+   * Configure the peripheral base address with parameter :
+   * - NbData: DMA_CNDTR_NDT[15:0] bits
+   */
+  LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData);
+
+  return SUCCESS;
+}
+
+/**
+  * @brief  Set each @ref LL_DMA_InitTypeDef field to default value.
+  * @param  DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure.
+  * @retval None
+  */
+void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct)
+{
+  /* Set DMA_InitStruct fields to default values */
+  DMA_InitStruct->PeriphOrM2MSrcAddress  = 0x00000000U;
+  DMA_InitStruct->MemoryOrM2MDstAddress  = 0x00000000U;
+  DMA_InitStruct->Direction              = LL_DMA_DIRECTION_PERIPH_TO_MEMORY;
+  DMA_InitStruct->Mode                   = LL_DMA_MODE_NORMAL;
+  DMA_InitStruct->PeriphOrM2MSrcIncMode  = LL_DMA_PERIPH_NOINCREMENT;
+  DMA_InitStruct->MemoryOrM2MDstIncMode  = LL_DMA_MEMORY_NOINCREMENT;
+  DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE;
+  DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE;
+  DMA_InitStruct->NbData                 = 0x00000000U;
+  DMA_InitStruct->Priority               = LL_DMA_PRIORITY_LOW;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DMA1 || DMA2 */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_exti.c

@@ -0,0 +1,215 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_exti.c
+  * @author  MCD Application Team
+  * @brief   EXTI LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_exti.h"
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (EXTI)
+
+/** @defgroup EXTI_LL EXTI
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Private_Macros
+  * @{
+  */
+
+#define IS_LL_EXTI_LINE_0_31(__VALUE__)              (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U)
+
+#define IS_LL_EXTI_MODE(__VALUE__)                   (((__VALUE__) == LL_EXTI_MODE_IT)            \
+                                                   || ((__VALUE__) == LL_EXTI_MODE_EVENT)         \
+                                                   || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT))
+
+
+#define IS_LL_EXTI_TRIGGER(__VALUE__)                (((__VALUE__) == LL_EXTI_TRIGGER_NONE)       \
+                                                   || ((__VALUE__) == LL_EXTI_TRIGGER_RISING)     \
+                                                   || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING)    \
+                                                   || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING))
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup EXTI_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize the EXTI registers to their default reset values.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: EXTI registers are de-initialized
+  *          - ERROR: not applicable
+  */
+uint32_t LL_EXTI_DeInit(void)
+{
+  /* Interrupt mask register set to default reset values */
+  LL_EXTI_WriteReg(IMR,   0x00000000U);
+  /* Event mask register set to default reset values */
+  LL_EXTI_WriteReg(EMR,   0x00000000U);
+  /* Rising Trigger selection register set to default reset values */
+  LL_EXTI_WriteReg(RTSR,  0x00000000U);
+  /* Falling Trigger selection register set to default reset values */
+  LL_EXTI_WriteReg(FTSR,  0x00000000U);
+  /* Software interrupt event register set to default reset values */
+  LL_EXTI_WriteReg(SWIER, 0x00000000U);
+  /* Pending register clear */
+  LL_EXTI_WriteReg(PR,    0x000FFFFFU);
+
+  return SUCCESS;
+}
+
+/**
+  * @brief  Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct.
+  * @param  EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: EXTI registers are initialized
+  *          - ERROR: not applicable
+  */
+uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  /* Check the parameters */
+  assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31));
+  assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand));
+  assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode));
+
+  /* ENABLE LineCommand */
+  if (EXTI_InitStruct->LineCommand != DISABLE)
+  {
+    assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger));
+
+    /* Configure EXTI Lines in range from 0 to 31 */
+    if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE)
+    {
+      switch (EXTI_InitStruct->Mode)
+      {
+        case LL_EXTI_MODE_IT:
+          /* First Disable Event on provided Lines */
+          LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+          /* Then Enable IT on provided Lines */
+          LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+          break;
+        case LL_EXTI_MODE_EVENT:
+          /* First Disable IT on provided Lines */
+          LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+          /* Then Enable Event on provided Lines */
+          LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+          break;
+        case LL_EXTI_MODE_IT_EVENT:
+          /* Directly Enable IT & Event on provided Lines */
+          LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+          LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+          break;
+        default:
+          status = ERROR;
+          break;
+      }
+      if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE)
+      {
+        switch (EXTI_InitStruct->Trigger)
+        {
+          case LL_EXTI_TRIGGER_RISING:
+            /* First Disable Falling Trigger on provided Lines */
+            LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            /* Then Enable Rising Trigger on provided Lines */
+            LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            break;
+          case LL_EXTI_TRIGGER_FALLING:
+            /* First Disable Rising Trigger on provided Lines */
+            LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            /* Then Enable Falling Trigger on provided Lines */
+            LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            break;
+          case LL_EXTI_TRIGGER_RISING_FALLING:
+            LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            break;
+          default:
+            status = ERROR;
+            break;
+        }
+      }
+    }
+  }
+  /* DISABLE LineCommand */
+  else
+  {
+    /* De-configure EXTI Lines in range from 0 to 31 */
+    LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+    LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_EXTI_InitTypeDef field to default value.
+  * @param  EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure.
+  * @retval None
+  */
+void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+  EXTI_InitStruct->Line_0_31      = LL_EXTI_LINE_NONE;
+  EXTI_InitStruct->LineCommand    = DISABLE;
+  EXTI_InitStruct->Mode           = LL_EXTI_MODE_IT;
+  EXTI_InitStruct->Trigger        = LL_EXTI_TRIGGER_FALLING;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined (EXTI) */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_fsmc.c

@@ -0,0 +1,985 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_fsmc.c
+  * @author  MCD Application Team
+  * @brief   FSMC Low Layer HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Flexible Memory Controller (FSMC) peripheral memories:
+  *           + Initialization/de-initialization functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### FSMC peripheral features #####
+  ==============================================================================
+  [..] The Flexible memory controller (FSMC) includes following memory controllers:
+       (+) The NOR/PSRAM memory controller
+       (+) The NAND/PC Card memory controller
+
+  [..] The FSMC functional block makes the interface with synchronous and asynchronous static
+       memories and 16-bit PC memory cards. Its main purposes are:
+       (+) to translate AHB transactions into the appropriate external device protocol
+       (+) to meet the access time requirements of the external memory devices
+
+  [..] All external memories share the addresses, data and control signals with the controller.
+       Each external device is accessed by means of a unique Chip Select. The FSMC performs
+       only one access at a time to an external device.
+       The main features of the FSMC controller are the following:
+        (+) Interface with static-memory mapped devices including:
+           (++) Static random access memory (SRAM)
+           (++) Read-only memory (ROM)
+           (++) NOR Flash memory/OneNAND Flash memory
+           (++) PSRAM (4 memory banks)
+           (++) 16-bit PC Card compatible devices
+           (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
+                data
+        (+) Independent Chip Select control for each memory bank
+        (+) Independent configuration for each memory bank
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+#if (((defined HAL_NOR_MODULE_ENABLED || defined HAL_SRAM_MODULE_ENABLED)) || defined HAL_NAND_MODULE_ENABLED || defined HAL_PCCARD_MODULE_ENABLED )
+
+/** @defgroup FSMC_LL  FSMC Low Layer
+  * @brief FSMC driver modules
+  * @{
+  */
+	
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup FSMC_LL_Private_Constants FSMC Low Layer Private Constants
+  * @{
+  */
+
+/* ----------------------- FSMC registers bit mask --------------------------- */
+
+#if defined FSMC_BANK1
+/* --- BCR Register ---*/
+/* BCR register clear mask */
+
+/* --- BTR Register ---*/
+/* BTR register clear mask */
+#define BTR_CLEAR_MASK    ((uint32_t)(FSMC_BTRx_ADDSET | FSMC_BTRx_ADDHLD  |\
+                                      FSMC_BTRx_DATAST | FSMC_BTRx_BUSTURN |\
+                                      FSMC_BTRx_CLKDIV | FSMC_BTRx_DATLAT  |\
+                                      FSMC_BTRx_ACCMOD))
+
+/* --- BWTR Register ---*/
+/* BWTR register clear mask */
+#if defined(FSMC_BWTRx_BUSTURN)
+#define BWTR_CLEAR_MASK   ((uint32_t)(FSMC_BWTRx_ADDSET | FSMC_BWTRx_ADDHLD  |\
+                                      FSMC_BWTRx_DATAST | FSMC_BWTRx_BUSTURN |\
+                                      FSMC_BWTRx_ACCMOD))
+#else
+#define BWTR_CLEAR_MASK   ((uint32_t)(FSMC_BWTRx_ADDSET | FSMC_BWTRx_ADDHLD  |\
+                                      FSMC_BWTRx_DATAST | FSMC_BWTRx_ACCMOD))
+#endif /* FSMC_BWTRx_BUSTURN */
+#endif /* FSMC_BANK1 */
+#if defined(FSMC_BANK3)
+
+/* --- PCR Register ---*/
+/* PCR register clear mask */
+#define PCR_CLEAR_MASK    ((uint32_t)(FSMC_PCRx_PWAITEN | FSMC_PCRx_PBKEN  | \
+                                      FSMC_PCRx_PTYP    | FSMC_PCRx_PWID   | \
+                                      FSMC_PCRx_ECCEN   | FSMC_PCRx_TCLR   | \
+                                      FSMC_PCRx_TAR     | FSMC_PCRx_ECCPS))
+/* --- PMEM Register ---*/
+/* PMEM register clear mask */
+#define PMEM_CLEAR_MASK   ((uint32_t)(FSMC_PMEMx_MEMSETx  | FSMC_PMEMx_MEMWAITx |\
+                                      FSMC_PMEMx_MEMHOLDx | FSMC_PMEMx_MEMHIZx))
+
+/* --- PATT Register ---*/
+/* PATT register clear mask */
+#define PATT_CLEAR_MASK   ((uint32_t)(FSMC_PATTx_ATTSETx  | FSMC_PATTx_ATTWAITx |\
+                                      FSMC_PATTx_ATTHOLDx | FSMC_PATTx_ATTHIZx))
+
+#endif /* FSMC_BANK3 */
+#if defined(FSMC_BANK4)
+/* --- PCR Register ---*/
+/* PCR register clear mask */
+#define PCR4_CLEAR_MASK   ((uint32_t)(FSMC_PCR4_PWAITEN | FSMC_PCR4_PBKEN  | \
+                                      FSMC_PCR4_PTYP    | FSMC_PCR4_PWID   | \
+                                      FSMC_PCR4_ECCEN   | FSMC_PCR4_TCLR   | \
+                                      FSMC_PCR4_TAR     | FSMC_PCR4_ECCPS))
+/* --- PMEM Register ---*/
+/* PMEM register clear mask */
+#define PMEM4_CLEAR_MASK  ((uint32_t)(FSMC_PMEM4_MEMSET4  | FSMC_PMEM4_MEMWAIT4 |\
+                                      FSMC_PMEM4_MEMHOLD4 | FSMC_PMEM4_MEMHIZ4))
+
+/* --- PATT Register ---*/
+/* PATT register clear mask */
+#define PATT4_CLEAR_MASK  ((uint32_t)(FSMC_PATT4_ATTSET4  | FSMC_PATT4_ATTWAIT4 |\
+                                      FSMC_PATT4_ATTHOLD4 | FSMC_PATT4_ATTHIZ4))
+
+/* --- PIO4 Register ---*/
+/* PIO4 register clear mask */
+#define PIO4_CLEAR_MASK   ((uint32_t)(FSMC_PIO4_IOSET4  | FSMC_PIO4_IOWAIT4 | \
+                                      FSMC_PIO4_IOHOLD4 | FSMC_PIO4_IOHIZ4))
+
+#endif /* FSMC_BANK4 */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup FSMC_LL_Exported_Functions FSMC Low Layer Exported Functions
+  * @{
+  */
+
+#if defined FSMC_BANK1
+
+/** @defgroup FSMC_LL_Exported_Functions_NORSRAM FSMC Low Layer NOR SRAM Exported Functions
+  * @brief  NORSRAM Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                   ##### How to use NORSRAM device driver #####
+  ==============================================================================
+
+  [..]
+    This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order
+    to run the NORSRAM external devices.
+
+    (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit()
+    (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init()
+    (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init()
+    (+) FSMC NORSRAM bank extended timing configuration using the function
+        FSMC_NORSRAM_Extended_Timing_Init()
+    (+) FSMC NORSRAM bank enable/disable write operation using the functions
+        FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable()
+
+@endverbatim
+  * @{
+  */
+
+/** @defgroup FSMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions
+  *
+  @verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FSMC NORSRAM interface
+    (+) De-initialize the FSMC NORSRAM interface
+    (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the FSMC_NORSRAM device according to the specified
+  *         control parameters in the FSMC_NORSRAM_InitTypeDef
+  * @param  Device Pointer to NORSRAM device instance
+  * @param  Init Pointer to NORSRAM Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init)
+{
+  uint32_t flashaccess;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank));
+  assert_param(IS_FSMC_MUX(Init->DataAddressMux));
+  assert_param(IS_FSMC_MEMORY(Init->MemoryType));
+  assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode));
+  assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity));
+  assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode));
+  assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
+  assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation));
+  assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal));
+  assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode));
+  assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
+  assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
+  assert_param(IS_FSMC_PAGESIZE(Init->PageSize));
+
+  /* Disable NORSRAM Device */
+  __FSMC_NORSRAM_DISABLE(Device, Init->NSBank);
+
+  /* Set NORSRAM device control parameters */
+  if (Init->MemoryType == FSMC_MEMORY_TYPE_NOR)
+  {
+    flashaccess = FSMC_NORSRAM_FLASH_ACCESS_ENABLE;
+  }
+  else
+  {
+    flashaccess = FSMC_NORSRAM_FLASH_ACCESS_DISABLE;
+  }
+
+  MODIFY_REG(Device->BTCR[Init->NSBank],
+             (FSMC_BCRx_MBKEN                |
+              FSMC_BCRx_MUXEN                |
+              FSMC_BCRx_MTYP                 |
+              FSMC_BCRx_MWID                 |
+              FSMC_BCRx_FACCEN               |
+              FSMC_BCRx_BURSTEN              |
+              FSMC_BCRx_WAITPOL              |
+              FSMC_BCRx_WRAPMOD              |
+              FSMC_BCRx_WAITCFG              |
+              FSMC_BCRx_WREN                 |
+              FSMC_BCRx_WAITEN               |
+              FSMC_BCRx_EXTMOD               |
+              FSMC_BCRx_ASYNCWAIT            |
+              FSMC_BCRx_CBURSTRW             |
+              0x00070000U), /* CPSIZE to be defined in CMSIS file */
+             (flashaccess                   |
+              Init->DataAddressMux          |
+              Init->MemoryType              |
+              Init->MemoryDataWidth         |
+              Init->BurstAccessMode         |
+              Init->WaitSignalPolarity      |
+              Init->WrapMode                |
+              Init->WaitSignalActive        |
+              Init->WriteOperation          |
+              Init->WaitSignal              |
+              Init->ExtendedMode            |
+              Init->AsynchronousWait        |
+              Init->WriteBurst              |
+              Init->PageSize));
+
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitialize the FSMC_NORSRAM peripheral
+  * @param  Device Pointer to NORSRAM device instance
+  * @param  ExDevice Pointer to NORSRAM extended mode device instance
+  * @param  Bank NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
+  assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+  /* Disable the FSMC_NORSRAM device */
+  __FSMC_NORSRAM_DISABLE(Device, Bank);
+
+  /* De-initialize the FSMC_NORSRAM device */
+  /* FSMC_NORSRAM_BANK1 */
+  if (Bank == FSMC_NORSRAM_BANK1)
+  {
+    Device->BTCR[Bank] = 0x000030DBU;
+  }
+  /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */
+  else
+  {
+    Device->BTCR[Bank] = 0x000030D2U;
+  }
+
+  Device->BTCR[Bank + 1U] = 0x0FFFFFFFU;
+  ExDevice->BWTR[Bank]   = 0x0FFFFFFFU;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the FSMC_NORSRAM Timing according to the specified
+  *         parameters in the FSMC_NORSRAM_TimingTypeDef
+  * @param  Device Pointer to NORSRAM device instance
+  * @param  Timing Pointer to NORSRAM Timing structure
+  * @param  Bank NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+  assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+  assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+  assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+  assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
+  assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
+  assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+  assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+  /* Set FSMC_NORSRAM device timing parameters */
+  MODIFY_REG(Device->BTCR[Bank + 1U], BTR_CLEAR_MASK, (Timing->AddressSetupTime                                  |
+                                                      ((Timing->AddressHoldTime)        << FSMC_BTRx_ADDHLD_Pos)  |
+                                                      ((Timing->DataSetupTime)          << FSMC_BTRx_DATAST_Pos)  |
+                                                      ((Timing->BusTurnAroundDuration)  << FSMC_BTRx_BUSTURN_Pos) |
+                                                      (((Timing->CLKDivision) - 1U)     << FSMC_BTRx_CLKDIV_Pos)  |
+                                                      (((Timing->DataLatency) - 2U)     << FSMC_BTRx_DATLAT_Pos)  |
+                                                      (Timing->AccessMode)));
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the FSMC_NORSRAM Extended mode Timing according to the specified
+  *         parameters in the FSMC_NORSRAM_TimingTypeDef
+  * @param  Device Pointer to NORSRAM device instance
+  * @param  Timing Pointer to NORSRAM Timing structure
+  * @param  Bank NORSRAM bank number
+  * @param  ExtendedMode FSMC Extended Mode
+  *          This parameter can be one of the following values:
+  *            @arg FSMC_EXTENDED_MODE_DISABLE
+  *            @arg FSMC_EXTENDED_MODE_ENABLE
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode));
+
+  /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+  if (ExtendedMode == FSMC_EXTENDED_MODE_ENABLE)
+  {
+    /* Check the parameters */
+    assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(Device));
+    assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+    assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+    assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+    assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+#else
+    assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
+    assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
+    assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+    assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+    /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+    MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime                                    |
+                                                     ((Timing->AddressHoldTime)        << FSMC_BWTRx_ADDHLD_Pos)  |
+                                                     ((Timing->DataSetupTime)          << FSMC_BWTRx_DATAST_Pos)  |
+                                                     Timing->AccessMode                                          |
+                                                     ((Timing->BusTurnAroundDuration)  << FSMC_BWTRx_BUSTURN_Pos)));
+#else
+    MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime                                    |
+                                                     ((Timing->AddressHoldTime)        << FSMC_BWTRx_ADDHLD_Pos)  |
+                                                     ((Timing->DataSetupTime)          << FSMC_BWTRx_DATAST_Pos)  |
+                                                     Timing->AccessMode                                          |
+                                                     (((Timing->CLKDivision) - 1U)     << FSMC_BTRx_CLKDIV_Pos)   |
+                                                     (((Timing->DataLatency) - 2U)     << FSMC_BWTRx_DATLAT_Pos)));
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
+  }
+  else
+  {
+    Device->BWTR[Bank] = 0x0FFFFFFFU;
+  }
+
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group2
+ *  @brief   management functions
+ *
+@verbatim
+  ==============================================================================
+                      ##### FSMC_NORSRAM Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FSMC NORSRAM interface.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables dynamically FSMC_NORSRAM write operation.
+  * @param  Device Pointer to NORSRAM device instance
+  * @param  Bank NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+  /* Enable write operation */
+  SET_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FSMC_NORSRAM write operation.
+  * @param  Device Pointer to NORSRAM device instance
+  * @param  Bank NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+  /* Disable write operation */
+  CLEAR_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* FSMC_BANK1 */
+
+#if defined(FSMC_BANK3)
+
+/** @defgroup FSMC_LL_Exported_Functions_NAND FSMC Low Layer NAND Exported Functions
+  * @brief    NAND Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use NAND device driver #####
+  ==============================================================================
+  [..]
+    This driver contains a set of APIs to interface with the FSMC NAND banks in order
+    to run the NAND external devices.
+
+    (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit()
+    (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init()
+    (+) FSMC NAND bank common space timing configuration using the function
+        FSMC_NAND_CommonSpace_Timing_Init()
+    (+) FSMC NAND bank attribute space timing configuration using the function
+        FSMC_NAND_AttributeSpace_Timing_Init()
+    (+) FSMC NAND bank enable/disable ECC correction feature using the functions
+        FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable()
+    (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC()
+
+@endverbatim
+  * @{
+  */
+
+/** @defgroup FSMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FSMC NAND interface
+    (+) De-initialize the FSMC NAND interface
+    (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FSMC_NAND device according to the specified
+  *         control parameters in the FSMC_NAND_HandleTypeDef
+  * @param  Device Pointer to NAND device instance
+  * @param  Init Pointer to NAND Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NAND_DEVICE(Device));
+  assert_param(IS_FSMC_NAND_BANK(Init->NandBank));
+  assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+  assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FSMC_ECC_STATE(Init->EccComputation));
+  assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize));
+  assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+  assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+  /* Set NAND device control parameters */
+  if (Init->NandBank == FSMC_NAND_BANK2)
+  {
+    /* NAND bank 2 registers configuration */
+    MODIFY_REG(Device->PCR2, PCR_CLEAR_MASK, (Init->Waitfeature                                      |
+                                              FSMC_PCR_MEMORY_TYPE_NAND                               |
+                                              Init->MemoryDataWidth                                  |
+                                              Init->EccComputation                                   |
+                                              Init->ECCPageSize                                      |
+                                              ((Init->TCLRSetupTime) << FSMC_PCRx_TCLR_Pos)  |
+                                              ((Init->TARSetupTime)  << FSMC_PCRx_TAR_Pos)));
+  }
+  else
+  {
+    /* NAND bank 3 registers configuration */
+    MODIFY_REG(Device->PCR3, PCR_CLEAR_MASK, (Init->Waitfeature                                      |
+                                              FSMC_PCR_MEMORY_TYPE_NAND                               |
+                                              Init->MemoryDataWidth                                  |
+                                              Init->EccComputation                                   |
+                                              Init->ECCPageSize                                      |
+                                              ((Init->TCLRSetupTime) << FSMC_PCRx_TCLR_Pos)  |
+                                              ((Init->TARSetupTime)  << FSMC_PCRx_TAR_Pos)));
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_NAND Common space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device Pointer to NAND device instance
+  * @param  Timing Pointer to NAND timing structure
+  * @param  Bank NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NAND_DEVICE(Device));
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+  assert_param(IS_FSMC_NAND_BANK(Bank));
+
+  /* Set FSMC_NAND device timing parameters */
+  if (Bank == FSMC_NAND_BANK2)
+  {
+    /* NAND bank 2 registers configuration */
+    MODIFY_REG(Device->PMEM2, PMEM_CLEAR_MASK, (Timing->SetupTime                                             |
+                                                ((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) |
+                                                ((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) |
+                                                ((Timing->HiZSetupTime)  << FSMC_PMEMx_MEMHIZx_Pos)));
+  }
+  else
+  {
+    /* NAND bank 3 registers configuration */
+    MODIFY_REG(Device->PMEM3, PMEM_CLEAR_MASK, (Timing->SetupTime                                             |
+                                                ((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) |
+                                                ((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) |
+                                                ((Timing->HiZSetupTime)  << FSMC_PMEMx_MEMHIZx_Pos)));
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_NAND Attribute space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device Pointer to NAND device instance
+  * @param  Timing Pointer to NAND timing structure
+  * @param  Bank NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NAND_DEVICE(Device));
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+  assert_param(IS_FSMC_NAND_BANK(Bank));
+
+  /* Set FSMC_NAND device timing parameters */
+  if (Bank == FSMC_NAND_BANK2)
+  {
+    /* NAND bank 2 registers configuration */
+    MODIFY_REG(Device->PATT2, PATT_CLEAR_MASK, (Timing->SetupTime                                             |
+                                                ((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) |
+                                                ((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) |
+                                                ((Timing->HiZSetupTime)  << FSMC_PATTx_ATTHIZx_Pos)));
+  }
+  else
+  {
+    /* NAND bank 3 registers configuration */
+    MODIFY_REG(Device->PATT3, PATT_CLEAR_MASK, (Timing->SetupTime                                             |
+                                                ((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) |
+                                                ((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) |
+                                                ((Timing->HiZSetupTime)  << FSMC_PATTx_ATTHIZx_Pos)));
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FSMC_NAND device
+  * @param  Device Pointer to NAND device instance
+  * @param  Bank NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NAND_DEVICE(Device));
+  assert_param(IS_FSMC_NAND_BANK(Bank));
+
+  /* Disable the NAND Bank */
+  __FSMC_NAND_DISABLE(Device, Bank);
+
+  /* De-initialize the NAND Bank */
+  if (Bank == FSMC_NAND_BANK2)
+  {
+    /* Set the FSMC_NAND_BANK2 registers to their reset values */
+    WRITE_REG(Device->PCR2,  0x00000018U);
+    WRITE_REG(Device->SR2,   0x00000040U);
+    WRITE_REG(Device->PMEM2, 0xFCFCFCFCU);
+    WRITE_REG(Device->PATT2, 0xFCFCFCFCU);
+  }
+  /* FSMC_Bank3_NAND */
+  else
+  {
+    /* Set the FSMC_NAND_BANK3 registers to their reset values */
+    WRITE_REG(Device->PCR3,  0x00000018U);
+    WRITE_REG(Device->SR3,   0x00000040U);
+    WRITE_REG(Device->PMEM3, 0xFCFCFCFCU);
+    WRITE_REG(Device->PATT3, 0xFCFCFCFCU);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FSMC_NAND_Group2 Peripheral Control functions
+  *  @brief   management functions
+  *
+@verbatim
+  ==============================================================================
+                       ##### FSMC_NAND Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FSMC NAND interface.
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Enables dynamically FSMC_NAND ECC feature.
+  * @param  Device Pointer to NAND device instance
+  * @param  Bank NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NAND_DEVICE(Device));
+  assert_param(IS_FSMC_NAND_BANK(Bank));
+
+  /* Enable ECC feature */
+  if (Bank == FSMC_NAND_BANK2)
+  {
+    SET_BIT(Device->PCR2, FSMC_PCRx_ECCEN);
+  }
+  else
+  {
+    SET_BIT(Device->PCR3, FSMC_PCRx_ECCEN);
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Disables dynamically FSMC_NAND ECC feature.
+  * @param  Device Pointer to NAND device instance
+  * @param  Bank NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NAND_DEVICE(Device));
+  assert_param(IS_FSMC_NAND_BANK(Bank));
+
+  /* Disable ECC feature */
+  if (Bank == FSMC_NAND_BANK2)
+  {
+    CLEAR_BIT(Device->PCR2, FSMC_PCRx_ECCEN);
+  }
+  else
+  {
+    CLEAR_BIT(Device->PCR3, FSMC_PCRx_ECCEN);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FSMC_NAND ECC feature.
+  * @param  Device Pointer to NAND device instance
+  * @param  ECCval Pointer to ECC value
+  * @param  Bank NAND bank number
+  * @param  Timeout Timeout wait value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+  uint32_t tickstart;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_NAND_DEVICE(Device));
+  assert_param(IS_FSMC_NAND_BANK(Bank));
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until FIFO is empty */
+  while (__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET)
+  {
+    /* Check for the Timeout */
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  if (Bank == FSMC_NAND_BANK2)
+  {
+    /* Get the ECCR2 register value */
+    *ECCval = (uint32_t)Device->ECCR2;
+  }
+  else
+  {
+    /* Get the ECCR3 register value */
+    *ECCval = (uint32_t)Device->ECCR3;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+#endif /* FSMC_BANK3 */
+
+#if defined(FSMC_BANK4)
+
+/** @addtogroup FSMC_LL_PCCARD
+  * @brief    PCCARD Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use PCCARD device driver #####
+  ==============================================================================
+  [..]
+    This driver contains a set of APIs to interface with the FSMC PCCARD bank in order
+    to run the PCCARD/compact flash external devices.
+
+    (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit()
+    (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init()
+    (+) FSMC PCCARD bank common space timing configuration using the function
+        FSMC_PCCARD_CommonSpace_Timing_Init()
+    (+) FSMC PCCARD bank attribute space timing configuration using the function
+        FSMC_PCCARD_AttributeSpace_Timing_Init()
+    (+) FSMC PCCARD bank IO space timing configuration using the function
+        FSMC_PCCARD_IOSpace_Timing_Init()
+@endverbatim
+  * @{
+  */
+
+/** @addtogroup FSMC_LL_PCCARD_Private_Functions_Group1
+  *  @brief    Initialization and Configuration functions
+  *
+@verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FSMC PCCARD interface
+    (+) De-initialize the FSMC PCCARD interface
+    (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FSMC_PCCARD device according to the specified
+  *         control parameters in the FSMC_PCCARD_HandleTypeDef
+  * @param  Device Pointer to PCCARD device instance
+  * @param  Init Pointer to PCCARD Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+  assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+  assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+  assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+  /* Set FSMC_PCCARD device control parameters */
+  MODIFY_REG(Device->PCR4,
+             (FSMC_PCRx_PTYP                                          |
+              FSMC_PCRx_PWAITEN                                       |
+              FSMC_PCRx_PWID                                          |
+              FSMC_PCRx_TCLR                                          |
+              FSMC_PCRx_TAR),
+             (FSMC_PCR_MEMORY_TYPE_PCCARD                             |
+              Init->Waitfeature                                      |
+              FSMC_NAND_PCC_MEM_BUS_WIDTH_16                          |
+              (Init->TCLRSetupTime << FSMC_PCRx_TCLR_Pos)   |
+              (Init->TARSetupTime  << FSMC_PCRx_TAR_Pos)));
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_PCCARD Common space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device Pointer to PCCARD device instance
+  * @param  Timing Pointer to PCCARD timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  /* Set PCCARD timing parameters */
+  MODIFY_REG(Device->PMEM4, PMEM_CLEAR_MASK,
+             (Timing->SetupTime                                              |
+              ((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos)  |
+              ((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos)  |
+              ((Timing->HiZSetupTime)  << FSMC_PMEMx_MEMHIZx_Pos)));
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_PCCARD Attribute space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device Pointer to PCCARD device instance
+  * @param  Timing Pointer to PCCARD timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  /* Set PCCARD timing parameters */
+  MODIFY_REG(Device->PATT4, PATT_CLEAR_MASK,
+             (Timing->SetupTime                                              |
+              ((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos)  |
+              ((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos)  |
+              ((Timing->HiZSetupTime)  << FSMC_PATTx_ATTHIZx_Pos)));
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_PCCARD IO space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device Pointer to PCCARD device instance
+  * @param  Timing Pointer to PCCARD timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  /* Set FSMC_PCCARD device timing parameters */
+  MODIFY_REG(Device->PIO4, PIO4_CLEAR_MASK,
+             (Timing->SetupTime                                           |
+              (Timing->WaitSetupTime   << FSMC_PIO4_IOWAIT4_Pos) |
+              (Timing->HoldSetupTime   << FSMC_PIO4_IOHOLD4_Pos) |
+              (Timing->HiZSetupTime    << FSMC_PIO4_IOHIZ4_Pos)));
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FSMC_PCCARD device
+  * @param  Device Pointer to PCCARD device instance
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+
+  /* Disable the FSMC_PCCARD device */
+  __FSMC_PCCARD_DISABLE(Device);
+
+  /* De-initialize the FSMC_PCCARD device */
+  Device->PCR4    = 0x00000018U;
+  Device->SR4     = 0x00000040U;
+  Device->PMEM4   = 0xFCFCFCFCU;
+  Device->PATT4   = 0xFCFCFCFCU;
+  Device->PIO4    = 0xFCFCFCFCU;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+#endif /* FSMC_BANK4 */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_NOR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_gpio.c

@@ -0,0 +1,253 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_gpio.c
+  * @author  MCD Application Team
+  * @brief   GPIO LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_gpio.h"
+#include "stm32f1xx_ll_bus.h"
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG)
+
+/** @addtogroup GPIO_LL
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup GPIO_LL_Private_Macros
+  * @{
+  */
+
+#define IS_LL_GPIO_PIN(__VALUE__)          ((((__VALUE__) & LL_GPIO_PIN_ALL)!= 0u) &&\
+                                            (((__VALUE__) & (~LL_GPIO_PIN_ALL))== 0u))
+
+#define IS_LL_GPIO_MODE(__VALUE__)         (((__VALUE__) == LL_GPIO_MODE_ANALOG)       ||\
+                                            ((__VALUE__) == LL_GPIO_MODE_FLOATING)     ||\
+                                            ((__VALUE__) == LL_GPIO_MODE_INPUT)        ||\
+                                            ((__VALUE__) == LL_GPIO_MODE_OUTPUT)       ||\
+                                            ((__VALUE__) == LL_GPIO_MODE_ALTERNATE))
+
+#define IS_LL_GPIO_SPEED(__VALUE__)        (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW)       ||\
+                                            ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM)    ||\
+                                            ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH))
+
+#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__)  (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL)  ||\
+                                            ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN))
+
+#define IS_LL_GPIO_PULL(__VALUE__)         (((__VALUE__) == LL_GPIO_PULL_DOWN)   ||\
+                                            ((__VALUE__) == LL_GPIO_PULL_UP))
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIO_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize GPIO registers (Registers restored to their default values).
+  * @param  GPIOx GPIO Port
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: GPIO registers are de-initialized
+  *          - ERROR:   Wrong GPIO Port
+  */
+ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx)
+{
+  ErrorStatus status = SUCCESS;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+
+  /* Force and Release reset on clock of GPIOx Port */
+  if (GPIOx == GPIOA)
+  {
+    LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOA);
+    LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOA);
+  }
+  else if (GPIOx == GPIOB)
+  {
+    LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOB);
+    LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOB);
+  }
+  else if (GPIOx == GPIOC)
+  {
+    LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOC);
+    LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOC);
+  }
+  else if (GPIOx == GPIOD)
+  {
+    LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOD);
+    LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOD);
+  }
+#if defined(GPIOE)
+  else if (GPIOx == GPIOE)
+  {
+    LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOE);
+    LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOE);
+  }
+#endif
+#if defined(GPIOF)
+  else if (GPIOx == GPIOF)
+  {
+    LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOF);
+    LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOF);
+  }
+#endif
+#if defined(GPIOG)
+  else if (GPIOx == GPIOG)
+  {
+    LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_GPIOG);
+    LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_GPIOG);
+  }
+#endif
+  else
+  {
+    status = ERROR;
+  }
+
+  return (status);
+}
+
+/**
+  * @brief  Initialize GPIO registers according to the specified parameters in GPIO_InitStruct.
+  * @param  GPIOx GPIO Port
+  * @param  GPIO_InitStruct: pointer to a @ref LL_GPIO_InitTypeDef structure
+  *         that contains the configuration information for the specified GPIO peripheral.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content
+  *          - ERROR:   Not applicable
+  */
+ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct)
+{
+  uint32_t pinmask;
+  uint32_t pinpos;
+  uint32_t currentpin;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin));
+
+  /* ------------------------- Configure the port pins ---------------- */
+  /* Initialize  pinpos on first pin set */
+
+  pinmask = ((GPIO_InitStruct->Pin) << GPIO_PIN_MASK_POS) >> GPIO_PIN_NB;
+  pinpos = POSITION_VAL(pinmask);
+
+  /* Configure the port pins */
+  while ((pinmask  >> pinpos) != 0u)
+  {
+    /* skip if bit is not set */
+    if ((pinmask & (1u << pinpos)) != 0u)
+    {
+      /* Get current io position */
+      if (pinpos < GPIO_PIN_MASK_POS)
+      {
+        currentpin = (0x00000101uL << pinpos);
+      }
+      else
+      {
+        currentpin = ((0x00010001u << (pinpos - GPIO_PIN_MASK_POS)) | 0x04000000u);
+      }
+
+      /* Check Pin Mode and Pin Pull parameters */
+      assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode));
+      assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull));
+
+      /* Pin Mode configuration */
+      LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
+
+      /* Pull-up Pull-down resistor configuration*/
+      LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull);
+
+      if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
+      {
+        /* Check speed and Output mode parameters */
+        assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed));
+        assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
+
+        /* Speed mode configuration */
+        LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed);
+
+        /* Output mode configuration*/
+        LL_GPIO_SetPinOutputType(GPIOx, currentpin, GPIO_InitStruct->OutputType);
+      }
+    }
+    pinpos++;
+  }
+  return (SUCCESS);
+}
+
+/**
+  * @brief Set each @ref LL_GPIO_InitTypeDef field to default value.
+  * @param GPIO_InitStruct: pointer to a @ref LL_GPIO_InitTypeDef structure
+  *                          whose fields will be set to default values.
+  * @retval None
+  */
+
+void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct)
+{
+  /* Reset GPIO init structure parameters values */
+  GPIO_InitStruct->Pin        = LL_GPIO_PIN_ALL;
+  GPIO_InitStruct->Mode       = LL_GPIO_MODE_FLOATING;
+  GPIO_InitStruct->Speed      = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_OPENDRAIN;
+  GPIO_InitStruct->Pull       = LL_GPIO_PULL_DOWN;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_i2c.c

@@ -0,0 +1,221 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_i2c.c
+  * @author  MCD Application Team
+  * @brief   I2C LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_i2c.h"
+#include "stm32f1xx_ll_bus.h"
+#include "stm32f1xx_ll_rcc.h"
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (I2C1) || defined (I2C2)
+
+/** @defgroup I2C_LL I2C
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup I2C_LL_Private_Macros
+  * @{
+  */
+
+#define IS_LL_I2C_PERIPHERAL_MODE(__VALUE__)    (((__VALUE__) == LL_I2C_MODE_I2C)          || \
+                                                 ((__VALUE__) == LL_I2C_MODE_SMBUS_HOST)   || \
+                                                 ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE) || \
+                                                 ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE_ARP))
+
+#define IS_LL_I2C_CLOCK_SPEED(__VALUE__)           (((__VALUE__) > 0U) && ((__VALUE__) <= LL_I2C_MAX_SPEED_FAST))
+
+#define IS_LL_I2C_DUTY_CYCLE(__VALUE__)            (((__VALUE__) == LL_I2C_DUTYCYCLE_2) || \
+                                                 ((__VALUE__) == LL_I2C_DUTYCYCLE_16_9))
+
+#define IS_LL_I2C_OWN_ADDRESS1(__VALUE__)       ((__VALUE__) <= 0x000003FFU)
+
+#define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__)   (((__VALUE__) == LL_I2C_ACK) || \
+                                                 ((__VALUE__) == LL_I2C_NACK))
+
+#define IS_LL_I2C_OWN_ADDRSIZE(__VALUE__)       (((__VALUE__) == LL_I2C_OWNADDRESS1_7BIT) || \
+                                                 ((__VALUE__) == LL_I2C_OWNADDRESS1_10BIT))
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2C_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize the I2C registers to their default reset values.
+  * @param  I2Cx I2C Instance.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS  I2C registers are de-initialized
+  *          - ERROR  I2C registers are not de-initialized
+  */
+uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx)
+{
+  ErrorStatus status = SUCCESS;
+
+  /* Check the I2C Instance I2Cx */
+  assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
+
+  if (I2Cx == I2C1)
+  {
+    /* Force reset of I2C clock */
+    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1);
+
+    /* Release reset of I2C clock */
+    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1);
+  }
+#if defined(I2C2)
+  else if (I2Cx == I2C2)
+  {
+    /* Force reset of I2C clock */
+    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C2);
+
+    /* Release reset of I2C clock */
+    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2);
+
+  }
+#endif /* I2C2 */
+  else
+  {
+    status = ERROR;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Initialize the I2C registers according to the specified parameters in I2C_InitStruct.
+  * @param  I2Cx I2C Instance.
+  * @param  I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS  I2C registers are initialized
+  *          - ERROR  Not applicable
+  */
+uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct)
+{
+  LL_RCC_ClocksTypeDef rcc_clocks;
+
+  /* Check the I2C Instance I2Cx */
+  assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
+
+  /* Check the I2C parameters from I2C_InitStruct */
+  assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode));
+  assert_param(IS_LL_I2C_CLOCK_SPEED(I2C_InitStruct->ClockSpeed));
+  assert_param(IS_LL_I2C_DUTY_CYCLE(I2C_InitStruct->DutyCycle));
+  assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1));
+  assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge));
+  assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize));
+
+  /* Disable the selected I2Cx Peripheral */
+  LL_I2C_Disable(I2Cx);
+
+  /* Retrieve Clock frequencies */
+  LL_RCC_GetSystemClocksFreq(&rcc_clocks);
+
+  /*---------------------------- I2Cx SCL Clock Speed Configuration ------------
+   * Configure the SCL speed :
+   * - ClockSpeed: I2C_CR2_FREQ[5:0], I2C_TRISE_TRISE[5:0], I2C_CCR_FS,
+   *           and I2C_CCR_CCR[11:0] bits
+   * - DutyCycle: I2C_CCR_DUTY[7:0] bits
+   */
+  LL_I2C_ConfigSpeed(I2Cx, rcc_clocks.PCLK1_Frequency, I2C_InitStruct->ClockSpeed, I2C_InitStruct->DutyCycle);
+
+  /*---------------------------- I2Cx OAR1 Configuration -----------------------
+   * Disable, Configure and Enable I2Cx device own address 1 with parameters :
+   * - OwnAddress1:  I2C_OAR1_ADD[9:8], I2C_OAR1_ADD[7:1] and I2C_OAR1_ADD0 bits
+   * - OwnAddrSize:  I2C_OAR1_ADDMODE bit
+   */
+  LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize);
+
+  /*---------------------------- I2Cx MODE Configuration -----------------------
+  * Configure I2Cx peripheral mode with parameter :
+   * - PeripheralMode: I2C_CR1_SMBUS, I2C_CR1_SMBTYPE and I2C_CR1_ENARP bits
+   */
+  LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode);
+
+  /* Enable the selected I2Cx Peripheral */
+  LL_I2C_Enable(I2Cx);
+
+  /*---------------------------- I2Cx CR2 Configuration ------------------------
+   * Configure the ACKnowledge or Non ACKnowledge condition
+   * after the address receive match code or next received byte with parameter :
+   * - TypeAcknowledge: I2C_CR2_NACK bit
+   */
+  LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge);
+
+  return SUCCESS;
+}
+
+/**
+  * @brief  Set each @ref LL_I2C_InitTypeDef field to default value.
+  * @param  I2C_InitStruct Pointer to a @ref LL_I2C_InitTypeDef structure.
+  * @retval None
+  */
+void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct)
+{
+  /* Set I2C_InitStruct fields to default values */
+  I2C_InitStruct->PeripheralMode  = LL_I2C_MODE_I2C;
+  I2C_InitStruct->ClockSpeed      = 5000U;
+  I2C_InitStruct->DutyCycle       = LL_I2C_DUTYCYCLE_2;
+  I2C_InitStruct->OwnAddress1     = 0U;
+  I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK;
+  I2C_InitStruct->OwnAddrSize     = LL_I2C_OWNADDRESS1_7BIT;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* I2C1 || I2C2 */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_pwr.c

@@ -0,0 +1,86 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_pwr.c
+  * @author  MCD Application Team
+  * @brief   PWR LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_pwr.h"
+#include "stm32f1xx_ll_bus.h"
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined(PWR)
+
+/** @defgroup PWR_LL PWR
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup PWR_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize the PWR registers to their default reset values.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: PWR registers are de-initialized
+  *          - ERROR: not applicable
+  */
+ErrorStatus LL_PWR_DeInit(void)
+{
+  /* Force reset of PWR clock */
+  LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_PWR);
+
+  /* Release reset of PWR clock */
+  LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_PWR);
+
+  return SUCCESS;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* defined(PWR) */
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_rtc.c

@@ -0,0 +1,544 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_rtc.c
+  * @author  MCD Application Team
+  * @brief   RTC LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_rtc.h"
+#include "stm32f1xx_ll_cortex.h"
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined(RTC)
+
+/** @addtogroup RTC_LL
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup RTC_LL_Private_Constants
+  * @{
+  */
+/* Default values used for prescaler */
+#define RTC_ASYNCH_PRESC_DEFAULT     0x00007FFFU
+
+/* Values used for timeout */
+#define RTC_INITMODE_TIMEOUT         1000U /* 1s when tick set to 1ms */
+#define RTC_SYNCHRO_TIMEOUT          1000U /* 1s when tick set to 1ms */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RTC_LL_Private_Macros
+  * @{
+  */
+
+#define IS_LL_RTC_ASYNCH_PREDIV(__VALUE__)   ((__VALUE__) <= 0xFFFFFU)
+
+#define IS_LL_RTC_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_FORMAT_BIN) \
+                                  || ((__VALUE__) == LL_RTC_FORMAT_BCD))
+
+#define IS_LL_RTC_HOUR24(__HOUR__)            ((__HOUR__) <= 23U)
+#define IS_LL_RTC_MINUTES(__MINUTES__)        ((__MINUTES__) <= 59U)
+#define IS_LL_RTC_SECONDS(__SECONDS__)        ((__SECONDS__) <= 59U)
+#define IS_LL_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == LL_RTC_CALIB_OUTPUT_NONE) || \
+                                            ((__OUTPUT__) == LL_RTC_CALIB_OUTPUT_RTCCLOCK) || \
+                                            ((__OUTPUT__) == LL_RTC_CALIB_OUTPUT_ALARM) || \
+                                            ((__OUTPUT__) == LL_RTC_CALIB_OUTPUT_SECOND))
+/**
+  * @}
+  */
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTC_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RTC_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-Initializes the RTC registers to their default reset values.
+  * @note   This function doesn't reset the RTC Clock source and RTC Backup Data
+  *         registers.
+  * @param  RTCx RTC Instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: RTC registers are de-initialized
+  *          - ERROR: RTC registers are not de-initialized
+  */
+ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx)
+{
+  ErrorStatus status = ERROR;
+
+  /* Check the parameter */
+  assert_param(IS_RTC_ALL_INSTANCE(RTCx));
+
+  /* Disable the write protection for RTC registers */
+  LL_RTC_DisableWriteProtection(RTCx);
+
+  /* Set Initialization mode */
+  if (LL_RTC_EnterInitMode(RTCx) != ERROR)
+  {
+    LL_RTC_WriteReg(RTCx, CNTL, 0x0000);
+    LL_RTC_WriteReg(RTCx, CNTH, 0x0000);
+    LL_RTC_WriteReg(RTCx, PRLH, 0x0000);
+    LL_RTC_WriteReg(RTCx, PRLL, 0x8000);
+    LL_RTC_WriteReg(RTCx, CRH,  0x0000);
+    LL_RTC_WriteReg(RTCx, CRL,  0x0020);
+
+    /* Reset Tamper and alternate functions configuration register */
+    LL_RTC_WriteReg(BKP, RTCCR, 0x00000000U);
+    LL_RTC_WriteReg(BKP, CR,    0x00000000U);
+    LL_RTC_WriteReg(BKP, CSR,   0x00000000U);
+
+    /* Exit Initialization Mode */
+    if (LL_RTC_ExitInitMode(RTCx) != ERROR)
+    {
+      /* Wait till the RTC RSF flag is set */
+      status = LL_RTC_WaitForSynchro(RTCx);
+  
+      /* Clear RSF Flag */
+      LL_RTC_ClearFlag_RS(RTCx);
+      
+      /* Enable the write protection for RTC registers */
+      LL_RTC_EnableWriteProtection(RTCx);
+    }
+  }
+  else
+  {
+    /* Enable the write protection for RTC registers */
+    LL_RTC_EnableWriteProtection(RTCx);
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Initializes the RTC registers according to the specified parameters
+  *         in RTC_InitStruct.
+  * @param  RTCx RTC Instance
+  * @param  RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure that contains
+  *         the configuration information for the RTC peripheral.
+  * @note   The RTC Prescaler register is write protected and can be written in
+  *         initialization mode only.
+  * @note   the user should call LL_RTC_StructInit()  or the structure of Prescaler
+  *         need to be initialized  before RTC init()
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: RTC registers are initialized
+  *          - ERROR: RTC registers are not initialized
+  */
+ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct)
+{
+  ErrorStatus status = ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_ALL_INSTANCE(RTCx));
+  assert_param(IS_LL_RTC_ASYNCH_PREDIV(RTC_InitStruct->AsynchPrescaler));
+  assert_param(IS_LL_RTC_CALIB_OUTPUT(RTC_InitStruct->OutPutSource));
+  /* Waiting for synchro */
+  if (LL_RTC_WaitForSynchro(RTCx) != ERROR)
+  {
+    /* Set Initialization mode */
+    if (LL_RTC_EnterInitMode(RTCx) != ERROR)
+    {
+      /* Clear Flag Bits */
+      LL_RTC_ClearFlag_ALR(RTCx);
+      LL_RTC_ClearFlag_OW(RTCx);
+      LL_RTC_ClearFlag_SEC(RTCx);
+
+      if (RTC_InitStruct->OutPutSource != LL_RTC_CALIB_OUTPUT_NONE)
+      {
+        /* Disable the selected Tamper Pin */
+        LL_RTC_TAMPER_Disable(BKP);
+      }
+      /* Set the signal which will be routed to RTC Tamper Pin */
+      LL_RTC_SetOutputSource(BKP, RTC_InitStruct->OutPutSource);
+
+      /* Configure Synchronous and Asynchronous prescaler factor */
+      LL_RTC_SetAsynchPrescaler(RTCx, RTC_InitStruct->AsynchPrescaler);
+
+      /* Exit Initialization Mode */
+      LL_RTC_ExitInitMode(RTCx);
+
+      status = SUCCESS;
+    }
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_RTC_InitTypeDef field to default value.
+  * @param  RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure which will be initialized.
+  * @retval None
+  */
+void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct)
+{
+  /* Set RTC_InitStruct fields to default values */
+  RTC_InitStruct->AsynchPrescaler = RTC_ASYNCH_PRESC_DEFAULT;
+  RTC_InitStruct->OutPutSource    = LL_RTC_CALIB_OUTPUT_NONE;
+}
+
+/**
+  * @brief  Set the RTC current time.
+  * @param  RTCx RTC Instance
+  * @param  RTC_Format This parameter can be one of the following values:
+  *         @arg @ref LL_RTC_FORMAT_BIN
+  *         @arg @ref LL_RTC_FORMAT_BCD
+  * @param  RTC_TimeStruct pointer to a RTC_TimeTypeDef structure that contains
+  *                        the time configuration information for the RTC.
+  * @note  The user should call LL_RTC_TIME_StructInit() or the structure
+  *        of time need to be initialized  before time init()
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: RTC Time register is configured
+  *          - ERROR: RTC Time register is not configured
+  */
+ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct)
+{
+  ErrorStatus status = ERROR;
+  uint32_t counter_time = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_ALL_INSTANCE(RTCx));
+  assert_param(IS_LL_RTC_FORMAT(RTC_Format));
+
+  if (RTC_Format == LL_RTC_FORMAT_BIN)
+  {
+    assert_param(IS_LL_RTC_HOUR24(RTC_TimeStruct->Hours));
+    assert_param(IS_LL_RTC_MINUTES(RTC_TimeStruct->Minutes));
+    assert_param(IS_LL_RTC_SECONDS(RTC_TimeStruct->Seconds));
+  }
+  else
+  {
+    assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours)));
+    assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes)));
+    assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds)));
+  }
+
+  /* Enter Initialization mode */
+  if (LL_RTC_EnterInitMode(RTCx) != ERROR)
+  {
+    /* Check the input parameters format */
+    if (RTC_Format != LL_RTC_FORMAT_BIN)
+    {
+      counter_time = (uint32_t)(((uint32_t)RTC_TimeStruct->Hours * 3600U) + \
+                                ((uint32_t)RTC_TimeStruct->Minutes * 60U) + \
+                                ((uint32_t)RTC_TimeStruct->Seconds));
+      LL_RTC_TIME_Set(RTCx, counter_time);
+    }
+    else
+    {
+      counter_time = (((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours)) * 3600U) + \
+                      ((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes)) * 60U) + \
+                      ((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds))));
+      LL_RTC_TIME_Set(RTCx, counter_time);
+    }
+    status = SUCCESS;
+  }
+  /* Exit Initialization mode */
+  LL_RTC_ExitInitMode(RTCx);
+
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_RTC_TimeTypeDef field to default value (Time = 00h:00min:00sec).
+  * @param  RTC_TimeStruct pointer to a @ref LL_RTC_TimeTypeDef structure which will be initialized.
+  * @retval None
+  */
+void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct)
+{
+  /* Time = 00h:00min:00sec */
+  RTC_TimeStruct->Hours      = 0U;
+  RTC_TimeStruct->Minutes    = 0U;
+  RTC_TimeStruct->Seconds    = 0U;
+}
+
+/**
+  * @brief  Set the RTC Alarm.
+  * @param  RTCx RTC Instance
+  * @param  RTC_Format This parameter can be one of the following values:
+  *         @arg @ref LL_RTC_FORMAT_BIN
+  *         @arg @ref LL_RTC_FORMAT_BCD
+  * @param  RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that
+  *                         contains the alarm configuration parameters.
+  * @note   the user should call LL_RTC_ALARM_StructInit()  or the structure
+  *         of Alarm need to be initialized  before Alarm init()
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ALARM registers are configured
+  *          - ERROR: ALARM registers are not configured
+  */
+ErrorStatus LL_RTC_ALARM_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct)
+{
+  ErrorStatus status = ERROR;
+  uint32_t counter_alarm = 0U;
+  /* Check the parameters */
+  assert_param(IS_RTC_ALL_INSTANCE(RTCx));
+  assert_param(IS_LL_RTC_FORMAT(RTC_Format));
+
+  if (RTC_Format == LL_RTC_FORMAT_BIN)
+  {
+    assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours));
+    assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes));
+    assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds));
+  }
+  else
+  {
+    assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours)));
+    assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes)));
+    assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds)));
+  }
+
+  /* Enter Initialization mode */
+  if (LL_RTC_EnterInitMode(RTCx) != ERROR)
+  {
+    /* Check the input parameters format */
+    if (RTC_Format != LL_RTC_FORMAT_BIN)
+    {
+      counter_alarm = (uint32_t)(((uint32_t)RTC_AlarmStruct->AlarmTime.Hours * 3600U) + \
+                                 ((uint32_t)RTC_AlarmStruct->AlarmTime.Minutes * 60U) + \
+                                 ((uint32_t)RTC_AlarmStruct->AlarmTime.Seconds));
+      LL_RTC_ALARM_Set(RTCx, counter_alarm);
+    }
+    else
+    {
+      counter_alarm = (((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours)) * 3600U) + \
+                       ((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes)) * 60U) + \
+                       ((uint32_t)(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))));
+      LL_RTC_ALARM_Set(RTCx, counter_alarm);
+    }
+    status = SUCCESS;
+  }
+  /* Exit Initialization mode */
+  LL_RTC_ExitInitMode(RTCx);
+
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_RTC_AlarmTypeDef of ALARM field to default value (Time = 00h:00mn:00sec /
+  *         Day = 1st day of the month/Mask = all fields are masked).
+  * @param  RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized.
+  * @retval None
+  */
+void LL_RTC_ALARM_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct)
+{
+  /* Alarm Time Settings : Time = 00h:00mn:00sec */
+  RTC_AlarmStruct->AlarmTime.Hours      = 0U;
+  RTC_AlarmStruct->AlarmTime.Minutes    = 0U;
+  RTC_AlarmStruct->AlarmTime.Seconds    = 0U;
+}
+
+/**
+  * @brief  Enters the RTC Initialization mode.
+  * @param  RTCx RTC Instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: RTC is in Init mode
+  *          - ERROR: RTC is not in Init mode
+  */
+ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx)
+{
+  __IO uint32_t timeout = RTC_INITMODE_TIMEOUT;
+  ErrorStatus status = SUCCESS;
+  uint32_t tmp = 0U;
+
+  /* Check the parameter */
+  assert_param(IS_RTC_ALL_INSTANCE(RTCx));
+
+  /* Wait till RTC is in INIT state and if Time out is reached exit */
+  tmp = LL_RTC_IsActiveFlag_RTOF(RTCx);
+  while ((timeout != 0U) && (tmp != 1U))
+  {
+    if (LL_SYSTICK_IsActiveCounterFlag() == 1U)
+    {
+      timeout --;
+    }
+    tmp = LL_RTC_IsActiveFlag_RTOF(RTCx);
+    if (timeout == 0U)
+    {
+      status = ERROR;
+    }
+  }
+
+  /* Disable the write protection for RTC registers */
+  LL_RTC_DisableWriteProtection(RTCx);
+
+  return status;
+}
+
+/**
+  * @brief  Exit the RTC Initialization mode.
+  * @note   When the initialization sequence is complete, the calendar restarts
+  *         counting after 4 RTCCLK cycles.
+  * @param  RTCx RTC Instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: RTC exited from in Init mode
+  *          - ERROR: Not applicable
+  */
+ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx)
+{
+  __IO uint32_t timeout = RTC_INITMODE_TIMEOUT;
+  ErrorStatus status = SUCCESS;
+  uint32_t tmp = 0U;
+
+  /* Check the parameter */
+  assert_param(IS_RTC_ALL_INSTANCE(RTCx));
+
+  /* Disable initialization mode */
+  LL_RTC_EnableWriteProtection(RTCx);
+
+  /* Wait till RTC is in INIT state and if Time out is reached exit */
+  tmp = LL_RTC_IsActiveFlag_RTOF(RTCx);
+  while ((timeout != 0U) && (tmp != 1U))
+  {
+    if (LL_SYSTICK_IsActiveCounterFlag() == 1U)
+    {
+      timeout --;
+    }
+    tmp = LL_RTC_IsActiveFlag_RTOF(RTCx);
+    if (timeout == 0U)
+    {
+      status = ERROR;
+    }
+  }
+  return status;
+}
+
+/**
+  * @brief  Set the Time Counter
+  * @param  RTCx RTC Instance
+  * @param  TimeCounter this value can be from 0 to 0xFFFFFFFF
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: RTC Counter register configured
+  *          - ERROR: Not applicable
+  */
+ErrorStatus LL_RTC_TIME_SetCounter(RTC_TypeDef *RTCx, uint32_t TimeCounter)
+{
+  ErrorStatus status = ERROR;
+  /* Check the parameter */
+  assert_param(IS_RTC_ALL_INSTANCE(RTCx));
+
+  /* Enter Initialization mode */
+  if (LL_RTC_EnterInitMode(RTCx) != ERROR)
+  {
+    LL_RTC_TIME_Set(RTCx, TimeCounter);
+    status = SUCCESS;
+  }
+  /* Exit Initialization mode */
+  LL_RTC_ExitInitMode(RTCx);
+
+  return status;
+}
+
+/**
+  * @brief  Set Alarm Counter.
+  * @param  RTCx RTC Instance
+  * @param  AlarmCounter this value can be from 0 to 0xFFFFFFFF
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: RTC exited from in Init mode
+  *          - ERROR: Not applicable
+  */
+ErrorStatus LL_RTC_ALARM_SetCounter(RTC_TypeDef *RTCx, uint32_t AlarmCounter)
+{
+  ErrorStatus status = ERROR;
+  /* Check the parameter */
+  assert_param(IS_RTC_ALL_INSTANCE(RTCx));
+
+  /* Enter Initialization mode */
+  if (LL_RTC_EnterInitMode(RTCx) != ERROR)
+  {
+    LL_RTC_ALARM_Set(RTCx, AlarmCounter);
+    status = SUCCESS;
+  }
+  /* Exit Initialization mode */
+  LL_RTC_ExitInitMode(RTCx);
+
+  return status;
+}
+
+/**
+  * @brief  Waits until the RTC registers are synchronized with RTC APB clock.
+  * @note   The RTC Resynchronization mode is write protected, use the
+  *         @ref LL_RTC_DisableWriteProtection before calling this function.
+  * @param  RTCx RTC Instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: RTC registers are synchronised
+  *          - ERROR: RTC registers are not synchronised
+  */
+ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx)
+{
+  __IO uint32_t timeout = RTC_SYNCHRO_TIMEOUT;
+  ErrorStatus status = SUCCESS;
+  uint32_t tmp = 0U;
+
+  /* Check the parameter */
+  assert_param(IS_RTC_ALL_INSTANCE(RTCx));
+
+  /* Clear RSF flag */
+  LL_RTC_ClearFlag_RS(RTCx);
+
+  /* Wait the registers to be synchronised */
+  tmp = LL_RTC_IsActiveFlag_RS(RTCx);
+  while ((timeout != 0U) && (tmp != 0U))
+  {
+    if (LL_SYSTICK_IsActiveCounterFlag() == 1U)
+    {
+      timeout--;
+    }
+    tmp = LL_RTC_IsActiveFlag_RS(RTCx);
+    if (timeout == 0U)
+    {
+      status = ERROR;
+    }
+  }
+
+  return (status);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined(RTC) */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_spi.c

@@ -0,0 +1,530 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_spi.c
+  * @author  MCD Application Team
+  * @brief   SPI LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_spi.h"
+#include "stm32f1xx_ll_bus.h"
+#include "stm32f1xx_ll_rcc.h"
+
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (SPI1) || defined (SPI2) || defined (SPI3)
+
+/** @addtogroup SPI_LL
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SPI_LL_Private_Constants SPI Private Constants
+  * @{
+  */
+/* SPI registers Masks */
+#define SPI_CR1_CLEAR_MASK                 (SPI_CR1_CPHA    | SPI_CR1_CPOL     | SPI_CR1_MSTR   | \
+                                            SPI_CR1_BR      | SPI_CR1_LSBFIRST | SPI_CR1_SSI    | \
+                                            SPI_CR1_SSM     | SPI_CR1_RXONLY   | SPI_CR1_DFF    | \
+                                            SPI_CR1_CRCNEXT | SPI_CR1_CRCEN    | SPI_CR1_BIDIOE | \
+                                            SPI_CR1_BIDIMODE)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPI_LL_Private_Macros SPI Private Macros
+  * @{
+  */
+#define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX)       \
+                                                 || ((__VALUE__) == LL_SPI_SIMPLEX_RX)     \
+                                                 || ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) \
+                                                 || ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX))
+
+#define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) \
+                                   || ((__VALUE__) == LL_SPI_MODE_SLAVE))
+
+#define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_8BIT)  \
+                                        || ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT))
+
+#define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) \
+                                       || ((__VALUE__) == LL_SPI_POLARITY_HIGH))
+
+#define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) \
+                                    || ((__VALUE__) == LL_SPI_PHASE_2EDGE))
+
+#define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT)          \
+                                  || ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) \
+                                  || ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT))
+
+#define IS_LL_SPI_BAUDRATE(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2)      \
+                                       || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4)   \
+                                       || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8)   \
+                                       || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16)  \
+                                       || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32)  \
+                                       || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64)  \
+                                       || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) \
+                                       || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256))
+
+#define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) \
+                                       || ((__VALUE__) == LL_SPI_MSB_FIRST))
+
+#define IS_LL_SPI_CRCCALCULATION(__VALUE__) (((__VALUE__) == LL_SPI_CRCCALCULATION_ENABLE) \
+                                             || ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE))
+
+#define IS_LL_SPI_CRC_POLYNOMIAL(__VALUE__) ((__VALUE__) >= 0x1U)
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup SPI_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize the SPI registers to their default reset values.
+  * @param  SPIx SPI Instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: SPI registers are de-initialized
+  *          - ERROR: SPI registers are not de-initialized
+  */
+ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx)
+{
+  ErrorStatus status = ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_INSTANCE(SPIx));
+
+#if defined(SPI1)
+  if (SPIx == SPI1)
+  {
+    /* Force reset of SPI clock */
+    LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI1);
+
+    /* Release reset of SPI clock */
+    LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI1);
+
+    status = SUCCESS;
+  }
+#endif /* SPI1 */
+#if defined(SPI2)
+  if (SPIx == SPI2)
+  {
+    /* Force reset of SPI clock */
+    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI2);
+
+    /* Release reset of SPI clock */
+    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI2);
+
+    status = SUCCESS;
+  }
+#endif /* SPI2 */
+#if defined(SPI3)
+  if (SPIx == SPI3)
+  {
+    /* Force reset of SPI clock */
+    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI3);
+
+    /* Release reset of SPI clock */
+    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI3);
+
+    status = SUCCESS;
+  }
+#endif /* SPI3 */
+
+  return status;
+}
+
+/**
+  * @brief  Initialize the SPI registers according to the specified parameters in SPI_InitStruct.
+  * @note   As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0),
+  *         SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+  * @param  SPIx SPI Instance
+  * @param  SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure
+  * @retval An ErrorStatus enumeration value. (Return always SUCCESS)
+  */
+ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct)
+{
+  ErrorStatus status = ERROR;
+
+  /* Check the SPI Instance SPIx*/
+  assert_param(IS_SPI_ALL_INSTANCE(SPIx));
+
+  /* Check the SPI parameters from SPI_InitStruct*/
+  assert_param(IS_LL_SPI_TRANSFER_DIRECTION(SPI_InitStruct->TransferDirection));
+  assert_param(IS_LL_SPI_MODE(SPI_InitStruct->Mode));
+  assert_param(IS_LL_SPI_DATAWIDTH(SPI_InitStruct->DataWidth));
+  assert_param(IS_LL_SPI_POLARITY(SPI_InitStruct->ClockPolarity));
+  assert_param(IS_LL_SPI_PHASE(SPI_InitStruct->ClockPhase));
+  assert_param(IS_LL_SPI_NSS(SPI_InitStruct->NSS));
+  assert_param(IS_LL_SPI_BAUDRATE(SPI_InitStruct->BaudRate));
+  assert_param(IS_LL_SPI_BITORDER(SPI_InitStruct->BitOrder));
+  assert_param(IS_LL_SPI_CRCCALCULATION(SPI_InitStruct->CRCCalculation));
+
+  if (LL_SPI_IsEnabled(SPIx) == 0x00000000U)
+  {
+    /*---------------------------- SPIx CR1 Configuration ------------------------
+     * Configure SPIx CR1 with parameters:
+     * - TransferDirection:  SPI_CR1_BIDIMODE, SPI_CR1_BIDIOE and SPI_CR1_RXONLY bits
+     * - Master/Slave Mode:  SPI_CR1_MSTR bit
+     * - DataWidth:          SPI_CR1_DFF bit
+     * - ClockPolarity:      SPI_CR1_CPOL bit
+     * - ClockPhase:         SPI_CR1_CPHA bit
+     * - NSS management:     SPI_CR1_SSM bit
+     * - BaudRate prescaler: SPI_CR1_BR[2:0] bits
+     * - BitOrder:           SPI_CR1_LSBFIRST bit
+     * - CRCCalculation:     SPI_CR1_CRCEN bit
+     */
+    MODIFY_REG(SPIx->CR1,
+               SPI_CR1_CLEAR_MASK,
+               SPI_InitStruct->TransferDirection | SPI_InitStruct->Mode | SPI_InitStruct->DataWidth |
+               SPI_InitStruct->ClockPolarity | SPI_InitStruct->ClockPhase |
+               SPI_InitStruct->NSS | SPI_InitStruct->BaudRate |
+               SPI_InitStruct->BitOrder | SPI_InitStruct->CRCCalculation);
+
+    /*---------------------------- SPIx CR2 Configuration ------------------------
+     * Configure SPIx CR2 with parameters:
+     * - NSS management:     SSOE bit
+     */
+    MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, (SPI_InitStruct->NSS >> 16U));
+
+    /*---------------------------- SPIx CRCPR Configuration ----------------------
+     * Configure SPIx CRCPR with parameters:
+     * - CRCPoly:            CRCPOLY[15:0] bits
+     */
+    if (SPI_InitStruct->CRCCalculation == LL_SPI_CRCCALCULATION_ENABLE)
+    {
+      assert_param(IS_LL_SPI_CRC_POLYNOMIAL(SPI_InitStruct->CRCPoly));
+      LL_SPI_SetCRCPolynomial(SPIx, SPI_InitStruct->CRCPoly);
+    }
+    status = SUCCESS;
+  }
+
+#if defined (SPI_I2S_SUPPORT)
+  /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */
+  CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD);
+#endif /* SPI_I2S_SUPPORT */
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_SPI_InitTypeDef field to default value.
+  * @param  SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure
+  * whose fields will be set to default values.
+  * @retval None
+  */
+void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct)
+{
+  /* Set SPI_InitStruct fields to default values */
+  SPI_InitStruct->TransferDirection = LL_SPI_FULL_DUPLEX;
+  SPI_InitStruct->Mode              = LL_SPI_MODE_SLAVE;
+  SPI_InitStruct->DataWidth         = LL_SPI_DATAWIDTH_8BIT;
+  SPI_InitStruct->ClockPolarity     = LL_SPI_POLARITY_LOW;
+  SPI_InitStruct->ClockPhase        = LL_SPI_PHASE_1EDGE;
+  SPI_InitStruct->NSS               = LL_SPI_NSS_HARD_INPUT;
+  SPI_InitStruct->BaudRate          = LL_SPI_BAUDRATEPRESCALER_DIV2;
+  SPI_InitStruct->BitOrder          = LL_SPI_MSB_FIRST;
+  SPI_InitStruct->CRCCalculation    = LL_SPI_CRCCALCULATION_DISABLE;
+  SPI_InitStruct->CRCPoly           = 7U;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#if defined(SPI_I2S_SUPPORT)
+/** @addtogroup I2S_LL
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2S_LL_Private_Constants I2S Private Constants
+  * @{
+  */
+/* I2S registers Masks */
+#define I2S_I2SCFGR_CLEAR_MASK             (SPI_I2SCFGR_CHLEN   | SPI_I2SCFGR_DATLEN | \
+                                            SPI_I2SCFGR_CKPOL   | SPI_I2SCFGR_I2SSTD | \
+                                            SPI_I2SCFGR_I2SCFG  | SPI_I2SCFGR_I2SMOD )
+
+#define I2S_I2SPR_CLEAR_MASK               0x0002U
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_LL_Private_Macros I2S Private Macros
+  * @{
+  */
+
+#define IS_LL_I2S_DATAFORMAT(__VALUE__)  (((__VALUE__) == LL_I2S_DATAFORMAT_16B)             \
+                                          || ((__VALUE__) == LL_I2S_DATAFORMAT_16B_EXTENDED) \
+                                          || ((__VALUE__) == LL_I2S_DATAFORMAT_24B)          \
+                                          || ((__VALUE__) == LL_I2S_DATAFORMAT_32B))
+
+#define IS_LL_I2S_CPOL(__VALUE__)        (((__VALUE__) == LL_I2S_POLARITY_LOW)  \
+                                          || ((__VALUE__) == LL_I2S_POLARITY_HIGH))
+
+#define IS_LL_I2S_STANDARD(__VALUE__)    (((__VALUE__) == LL_I2S_STANDARD_PHILIPS)      \
+                                          || ((__VALUE__) == LL_I2S_STANDARD_MSB)       \
+                                          || ((__VALUE__) == LL_I2S_STANDARD_LSB)       \
+                                          || ((__VALUE__) == LL_I2S_STANDARD_PCM_SHORT) \
+                                          || ((__VALUE__) == LL_I2S_STANDARD_PCM_LONG))
+
+#define IS_LL_I2S_MODE(__VALUE__)        (((__VALUE__) == LL_I2S_MODE_SLAVE_TX)     \
+                                          || ((__VALUE__) == LL_I2S_MODE_SLAVE_RX)  \
+                                          || ((__VALUE__) == LL_I2S_MODE_MASTER_TX) \
+                                          || ((__VALUE__) == LL_I2S_MODE_MASTER_RX))
+
+#define IS_LL_I2S_MCLK_OUTPUT(__VALUE__) (((__VALUE__) == LL_I2S_MCLK_OUTPUT_ENABLE) \
+                                          || ((__VALUE__) == LL_I2S_MCLK_OUTPUT_DISABLE))
+
+#define IS_LL_I2S_AUDIO_FREQ(__VALUE__) ((((__VALUE__) >= LL_I2S_AUDIOFREQ_8K)       \
+                                          && ((__VALUE__) <= LL_I2S_AUDIOFREQ_192K)) \
+                                         || ((__VALUE__) == LL_I2S_AUDIOFREQ_DEFAULT))
+
+#define IS_LL_I2S_PRESCALER_LINEAR(__VALUE__)  ((__VALUE__) >= 0x2U)
+
+#define IS_LL_I2S_PRESCALER_PARITY(__VALUE__) (((__VALUE__) == LL_I2S_PRESCALER_PARITY_EVEN) \
+                                               || ((__VALUE__) == LL_I2S_PRESCALER_PARITY_ODD))
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2S_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize the SPI/I2S registers to their default reset values.
+  * @param  SPIx SPI Instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: SPI registers are de-initialized
+  *          - ERROR: SPI registers are not de-initialized
+  */
+ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx)
+{
+  return LL_SPI_DeInit(SPIx);
+}
+
+/**
+  * @brief  Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct.
+  * @note   As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0),
+  *         SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+  * @param  SPIx SPI Instance
+  * @param  I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: SPI registers are Initialized
+  *          - ERROR: SPI registers are not Initialized
+  */
+ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct)
+{
+  uint32_t i2sdiv = 2U;
+  uint32_t i2sodd = 0U;
+  uint32_t packetlength = 1U;
+  uint32_t tmp;
+  LL_RCC_ClocksTypeDef rcc_clocks;
+  uint32_t sourceclock;
+  ErrorStatus status = ERROR;
+
+  /* Check the I2S parameters */
+  assert_param(IS_I2S_ALL_INSTANCE(SPIx));
+  assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode));
+  assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard));
+  assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat));
+  assert_param(IS_LL_I2S_MCLK_OUTPUT(I2S_InitStruct->MCLKOutput));
+  assert_param(IS_LL_I2S_AUDIO_FREQ(I2S_InitStruct->AudioFreq));
+  assert_param(IS_LL_I2S_CPOL(I2S_InitStruct->ClockPolarity));
+
+  if (LL_I2S_IsEnabled(SPIx) == 0x00000000U)
+  {
+    /*---------------------------- SPIx I2SCFGR Configuration --------------------
+     * Configure SPIx I2SCFGR with parameters:
+     * - Mode:          SPI_I2SCFGR_I2SCFG[1:0] bit
+     * - Standard:      SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits
+     * - DataFormat:    SPI_I2SCFGR_CHLEN and SPI_I2SCFGR_DATLEN bits
+     * - ClockPolarity: SPI_I2SCFGR_CKPOL bit
+     */
+
+    /* Write to SPIx I2SCFGR */
+    MODIFY_REG(SPIx->I2SCFGR,
+               I2S_I2SCFGR_CLEAR_MASK,
+               I2S_InitStruct->Mode | I2S_InitStruct->Standard |
+               I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity |
+               SPI_I2SCFGR_I2SMOD);
+
+    /*---------------------------- SPIx I2SPR Configuration ----------------------
+     * Configure SPIx I2SPR with parameters:
+     * - MCLKOutput:    SPI_I2SPR_MCKOE bit
+     * - AudioFreq:     SPI_I2SPR_I2SDIV[7:0] and SPI_I2SPR_ODD bits
+     */
+
+    /* If the requested audio frequency is not the default, compute the prescaler (i2sodd, i2sdiv)
+     * else, default values are used:  i2sodd = 0U, i2sdiv = 2U.
+     */
+    if (I2S_InitStruct->AudioFreq != LL_I2S_AUDIOFREQ_DEFAULT)
+    {
+      /* Check the frame length (For the Prescaler computing)
+       * Default value: LL_I2S_DATAFORMAT_16B (packetlength = 1U).
+       */
+      if (I2S_InitStruct->DataFormat != LL_I2S_DATAFORMAT_16B)
+      {
+        /* Packet length is 32 bits */
+        packetlength = 2U;
+      }
+
+      /* I2S Clock source is System clock: Get System Clock frequency */
+      LL_RCC_GetSystemClocksFreq(&rcc_clocks);
+
+      /* Get the source clock value: based on System Clock value */
+      sourceclock = rcc_clocks.SYSCLK_Frequency;
+
+      /* Compute the Real divider depending on the MCLK output state with a floating point */
+      if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE)
+      {
+        /* MCLK output is enabled */
+        tmp = (((((sourceclock / 256U) * 10U) / I2S_InitStruct->AudioFreq)) + 5U);
+      }
+      else
+      {
+        /* MCLK output is disabled */
+        tmp = (((((sourceclock / (32U * packetlength)) * 10U) / I2S_InitStruct->AudioFreq)) + 5U);
+      }
+
+      /* Remove the floating point */
+      tmp = tmp / 10U;
+
+      /* Check the parity of the divider */
+      i2sodd = (tmp & (uint16_t)0x0001U);
+
+      /* Compute the i2sdiv prescaler */
+      i2sdiv = ((tmp - i2sodd) / 2U);
+
+      /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+      i2sodd = (i2sodd << 8U);
+    }
+
+    /* Test if the divider is 1 or 0 or greater than 0xFF */
+    if ((i2sdiv < 2U) || (i2sdiv > 0xFFU))
+    {
+      /* Set the default values */
+      i2sdiv = 2U;
+      i2sodd = 0U;
+    }
+
+    /* Write to SPIx I2SPR register the computed value */
+    WRITE_REG(SPIx->I2SPR, i2sdiv | i2sodd | I2S_InitStruct->MCLKOutput);
+
+    status = SUCCESS;
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_I2S_InitTypeDef field to default value.
+  * @param  I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure
+  *         whose fields will be set to default values.
+  * @retval None
+  */
+void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct)
+{
+  /*--------------- Reset I2S init structure parameters values -----------------*/
+  I2S_InitStruct->Mode              = LL_I2S_MODE_SLAVE_TX;
+  I2S_InitStruct->Standard          = LL_I2S_STANDARD_PHILIPS;
+  I2S_InitStruct->DataFormat        = LL_I2S_DATAFORMAT_16B;
+  I2S_InitStruct->MCLKOutput        = LL_I2S_MCLK_OUTPUT_DISABLE;
+  I2S_InitStruct->AudioFreq         = LL_I2S_AUDIOFREQ_DEFAULT;
+  I2S_InitStruct->ClockPolarity     = LL_I2S_POLARITY_LOW;
+}
+
+/**
+  * @brief  Set linear and parity prescaler.
+  * @note   To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)\n
+  *         Check Audio frequency table and formulas inside Reference Manual (SPI/I2S).
+  * @param  SPIx SPI Instance
+  * @param  PrescalerLinear value Min_Data=0x02 and Max_Data=0xFF.
+  * @param  PrescalerParity This parameter can be one of the following values:
+  *         @arg @ref LL_I2S_PRESCALER_PARITY_EVEN
+  *         @arg @ref LL_I2S_PRESCALER_PARITY_ODD
+  * @retval None
+  */
+void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity)
+{
+  /* Check the I2S parameters */
+  assert_param(IS_I2S_ALL_INSTANCE(SPIx));
+  assert_param(IS_LL_I2S_PRESCALER_LINEAR(PrescalerLinear));
+  assert_param(IS_LL_I2S_PRESCALER_PARITY(PrescalerParity));
+
+  /* Write to SPIx I2SPR */
+  MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV | SPI_I2SPR_ODD, PrescalerLinear | (PrescalerParity << 8U));
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* SPI_I2S_SUPPORT */
+
+#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

LLDrivers/src/stm32f1xx_ll_usart.c

@@ -0,0 +1,446 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_usart.c
+  * @author  MCD Application Team
+  * @brief   USART LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_usart.h"
+#include "stm32f1xx_ll_rcc.h"
+#include "stm32f1xx_ll_bus.h"
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5)
+
+/** @addtogroup USART_LL
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup USART_LL_Private_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup USART_LL_Private_Macros
+  * @{
+  */
+
+/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available
+ *              divided by the smallest oversampling used on the USART (i.e. 8)    */
+#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 4500000U)
+
+/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */
+#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U)
+
+/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */
+#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
+
+#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \
+                                       || ((__VALUE__) == LL_USART_DIRECTION_RX) \
+                                       || ((__VALUE__) == LL_USART_DIRECTION_TX) \
+                                       || ((__VALUE__) == LL_USART_DIRECTION_TX_RX))
+
+#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \
+                                    || ((__VALUE__) == LL_USART_PARITY_EVEN) \
+                                    || ((__VALUE__) == LL_USART_PARITY_ODD))
+
+#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_8B) \
+                                       || ((__VALUE__) == LL_USART_DATAWIDTH_9B))
+
+#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \
+                                          || ((__VALUE__) == LL_USART_OVERSAMPLING_8))
+
+#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \
+                                              || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT))
+
+#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \
+                                        || ((__VALUE__) == LL_USART_PHASE_2EDGE))
+
+#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \
+                                           || ((__VALUE__) == LL_USART_POLARITY_HIGH))
+
+#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \
+                                         || ((__VALUE__) == LL_USART_CLOCK_ENABLE))
+
+#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \
+                                      || ((__VALUE__) == LL_USART_STOPBITS_1) \
+                                      || ((__VALUE__) == LL_USART_STOPBITS_1_5) \
+                                      || ((__VALUE__) == LL_USART_STOPBITS_2))
+
+#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \
+                                       || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \
+                                       || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \
+                                       || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS))
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup USART_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize USART registers (Registers restored to their default values).
+  * @param  USARTx USART Instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: USART registers are de-initialized
+  *          - ERROR: USART registers are not de-initialized
+  */
+ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx)
+{
+  ErrorStatus status = SUCCESS;
+
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(USARTx));
+
+  if (USARTx == USART1)
+  {
+    /* Force reset of USART clock */
+    LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1);
+
+    /* Release reset of USART clock */
+    LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1);
+  }
+  else if (USARTx == USART2)
+  {
+    /* Force reset of USART clock */
+    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2);
+
+    /* Release reset of USART clock */
+    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2);
+  }
+#if defined(USART3)
+  else if (USARTx == USART3)
+  {
+    /* Force reset of USART clock */
+    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART3);
+
+    /* Release reset of USART clock */
+    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3);
+  }
+#endif /* USART3 */
+#if defined(UART4)
+  else if (USARTx == UART4)
+  {
+    /* Force reset of UART clock */
+    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART4);
+
+    /* Release reset of UART clock */
+    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART4);
+  }
+#endif /* UART4 */
+#if defined(UART5)
+  else if (USARTx == UART5)
+  {
+    /* Force reset of UART clock */
+    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART5);
+
+    /* Release reset of UART clock */
+    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART5);
+  }
+#endif /* UART5 */
+  else
+  {
+    status = ERROR;
+  }
+
+  return (status);
+}
+
+/**
+  * @brief  Initialize USART registers according to the specified
+  *         parameters in USART_InitStruct.
+  * @note   As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0),
+  *         USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+  * @note   Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0).
+  * @param  USARTx USART Instance
+  * @param  USART_InitStruct pointer to a LL_USART_InitTypeDef structure
+  *         that contains the configuration information for the specified USART peripheral.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: USART registers are initialized according to USART_InitStruct content
+  *          - ERROR: Problem occurred during USART Registers initialization
+  */
+ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct)
+{
+  ErrorStatus status = ERROR;
+  uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO;
+  LL_RCC_ClocksTypeDef rcc_clocks;
+
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(USARTx));
+  assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate));
+  assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth));
+  assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits));
+  assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity));
+  assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection));
+  assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl));
+#if defined(USART_CR1_OVER8)
+  assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling));
+#endif /* USART_OverSampling_Feature */
+
+  /* USART needs to be in disabled state, in order to be able to configure some bits in
+     CRx registers */
+  if (LL_USART_IsEnabled(USARTx) == 0U)
+  {
+    /*---------------------------- USART CR1 Configuration -----------------------
+     * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters:
+     * - DataWidth:          USART_CR1_M bits according to USART_InitStruct->DataWidth value
+     * - Parity:             USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value
+     * - TransferDirection:  USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value
+     * - Oversampling:       USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value.
+     */
+#if defined(USART_CR1_OVER8)
+    MODIFY_REG(USARTx->CR1,
+               (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS |
+                USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8),
+               (USART_InitStruct->DataWidth | USART_InitStruct->Parity |
+                USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling));
+#else
+    MODIFY_REG(USARTx->CR1,
+               (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS |
+                USART_CR1_TE | USART_CR1_RE),
+               (USART_InitStruct->DataWidth | USART_InitStruct->Parity |
+                USART_InitStruct->TransferDirection));
+#endif /* USART_OverSampling_Feature */
+
+    /*---------------------------- USART CR2 Configuration -----------------------
+     * Configure USARTx CR2 (Stop bits) with parameters:
+     * - Stop Bits:          USART_CR2_STOP bits according to USART_InitStruct->StopBits value.
+     * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit().
+     */
+    LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits);
+
+    /*---------------------------- USART CR3 Configuration -----------------------
+     * Configure USARTx CR3 (Hardware Flow Control) with parameters:
+     * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to USART_InitStruct->HardwareFlowControl value.
+     */
+    LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl);
+
+    /*---------------------------- USART BRR Configuration -----------------------
+     * Retrieve Clock frequency used for USART Peripheral
+     */
+    LL_RCC_GetSystemClocksFreq(&rcc_clocks);
+    if (USARTx == USART1)
+    {
+      periphclk = rcc_clocks.PCLK2_Frequency;
+    }
+    else if (USARTx == USART2)
+    {
+      periphclk = rcc_clocks.PCLK1_Frequency;
+    }
+#if defined(USART3)
+    else if (USARTx == USART3)
+    {
+      periphclk = rcc_clocks.PCLK1_Frequency;
+    }
+#endif /* USART3 */
+#if defined(UART4)
+    else if (USARTx == UART4)
+    {
+      periphclk = rcc_clocks.PCLK1_Frequency;
+    }
+#endif /* UART4 */
+#if defined(UART5)
+    else if (USARTx == UART5)
+    {
+      periphclk = rcc_clocks.PCLK1_Frequency;
+    }
+#endif /* UART5 */
+    else
+    {
+      /* Nothing to do, as error code is already assigned to ERROR value */
+    }
+
+    /* Configure the USART Baud Rate :
+       - valid baud rate value (different from 0) is required
+       - Peripheral clock as returned by RCC service, should be valid (different from 0).
+    */
+    if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO)
+        && (USART_InitStruct->BaudRate != 0U))
+    {
+      status = SUCCESS;
+#if defined(USART_CR1_OVER8)
+      LL_USART_SetBaudRate(USARTx,
+                           periphclk,
+                           USART_InitStruct->OverSampling,
+                           USART_InitStruct->BaudRate);
+#else
+      LL_USART_SetBaudRate(USARTx,
+                           periphclk,
+                           USART_InitStruct->BaudRate);
+#endif /* USART_OverSampling_Feature */
+
+      /* Check BRR is greater than or equal to 16d */
+      assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR));
+
+      /* Check BRR is greater than or equal to 16d */
+      assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR));
+    }
+  }
+  /* Endif (=> USART not in Disabled state => return ERROR) */
+
+  return (status);
+}
+
+/**
+  * @brief Set each @ref LL_USART_InitTypeDef field to default value.
+  * @param USART_InitStruct Pointer to a @ref LL_USART_InitTypeDef structure
+  *                         whose fields will be set to default values.
+  * @retval None
+  */
+
+void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct)
+{
+  /* Set USART_InitStruct fields to default values */
+  USART_InitStruct->BaudRate            = 9600U;
+  USART_InitStruct->DataWidth           = LL_USART_DATAWIDTH_8B;
+  USART_InitStruct->StopBits            = LL_USART_STOPBITS_1;
+  USART_InitStruct->Parity              = LL_USART_PARITY_NONE ;
+  USART_InitStruct->TransferDirection   = LL_USART_DIRECTION_TX_RX;
+  USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+#if defined(USART_CR1_OVER8)
+  USART_InitStruct->OverSampling        = LL_USART_OVERSAMPLING_16;
+#endif /* USART_OverSampling_Feature */
+}
+
+/**
+  * @brief  Initialize USART Clock related settings according to the
+  *         specified parameters in the USART_ClockInitStruct.
+  * @note   As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0),
+  *         USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+  * @param  USARTx USART Instance
+  * @param  USART_ClockInitStruct Pointer to a @ref LL_USART_ClockInitTypeDef structure
+  *         that contains the Clock configuration information for the specified USART peripheral.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: USART registers related to Clock settings are initialized according to USART_ClockInitStruct content
+  *          - ERROR: Problem occurred during USART Registers initialization
+  */
+ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct)
+{
+  ErrorStatus status = SUCCESS;
+
+  /* Check USART Instance and Clock signal output parameters */
+  assert_param(IS_UART_INSTANCE(USARTx));
+  assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput));
+
+  /* USART needs to be in disabled state, in order to be able to configure some bits in
+     CRx registers */
+  if (LL_USART_IsEnabled(USARTx) == 0U)
+  {
+    /*---------------------------- USART CR2 Configuration -----------------------*/
+    /* If Clock signal has to be output */
+    if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE)
+    {
+      /* Deactivate Clock signal delivery :
+       * - Disable Clock Output:        USART_CR2_CLKEN cleared
+       */
+      LL_USART_DisableSCLKOutput(USARTx);
+    }
+    else
+    {
+      /* Ensure USART instance is USART capable */
+      assert_param(IS_USART_INSTANCE(USARTx));
+
+      /* Check clock related parameters */
+      assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity));
+      assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase));
+      assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse));
+
+      /*---------------------------- USART CR2 Configuration -----------------------
+       * Configure USARTx CR2 (Clock signal related bits) with parameters:
+       * - Enable Clock Output:         USART_CR2_CLKEN set
+       * - Clock Polarity:              USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value
+       * - Clock Phase:                 USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value
+       * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value.
+       */
+      MODIFY_REG(USARTx->CR2,
+                 USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL,
+                 USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity |
+                 USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse);
+    }
+  }
+  /* Else (USART not in Disabled state => return ERROR */
+  else
+  {
+    status = ERROR;
+  }
+
+  return (status);
+}
+
+/**
+  * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value.
+  * @param USART_ClockInitStruct Pointer to a @ref LL_USART_ClockInitTypeDef structure
+  *                              whose fields will be set to default values.
+  * @retval None
+  */
+void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct)
+{
+  /* Set LL_USART_ClockInitStruct fields with default values */
+  USART_ClockInitStruct->ClockOutput       = LL_USART_CLOCK_DISABLE;
+  USART_ClockInitStruct->ClockPolarity     = LL_USART_POLARITY_LOW;            /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+  USART_ClockInitStruct->ClockPhase        = LL_USART_PHASE_1EDGE;             /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+  USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT;  /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* USART1 || USART2 || USART3 || UART4 || UART5 */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

MDK-ARM/Project.uvoptx

@@ -101,9 +101,7 @@
         <sRunDeb>0</sRunDeb>
         <sLrtime>0</sLrtime>
         <bEvRecOn>1</bEvRecOn>
-        <bSchkAxf>0</bSchkAxf>
+        <nTsel>5</nTsel>
-        <bTchkAxf>0</bTchkAxf>
-        <nTsel>6</nTsel>
         <sDll></sDll>
         <sDllPa></sDllPa>
         <sDlgDll></sDlgDll>
@@ -130,7 +128,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>DLGTARM</Key>
-          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=100,127,658,622,0)(121=-1,-1,-1,-1,0)(122=834,179,1255,584,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)</Name>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=100,127,658,622,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -150,10 +148,50 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>ST-LINKIII-KEIL_SWO</Key>
-          <Name>-U-O142 -O2254 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(1BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103RB$Flash\STM32F10x_128.FLM)</Name>
+          <Name>-U-O142 -O2254 -S0 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103RB$Flash\STM32F10x_128.FLM)</Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
-      <Breakpoint/>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>47</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>134219058</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>../Src/main.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\NUCLEO_F103RB\../Src/main.c\47</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>44</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>134219052</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>../Src/main.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\NUCLEO_F103RB\../Src/main.c\44</Expression>
+        </Bp>
+      </Breakpoint>
+      <WatchWindow1>
+        <Ww>
+          <count>0</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>Main_Time</ItemText>
+        </Ww>
+      </WatchWindow1>
       <Tracepoint>
         <THDelay>0</THDelay>
       </Tracepoint>
@@ -192,13 +230,8 @@
       <pszMrule></pszMrule>
       <pSingCmds></pSingCmds>
       <pMultCmds></pMultCmds>
-      <pMisraNamep></pMisraNamep>
-      <pszMrulep></pszMrulep>
-      <pSingCmdsp></pSingCmdsp>
-      <pMultCmdsp></pMultCmdsp>
       <DebugDescription>
         <Enable>1</Enable>
-        <EnableFlashSeq>0</EnableFlashSeq>
         <EnableLog>0</EnableLog>
         <Protocol>2</Protocol>
         <DbgClock>10000000</DbgClock>
@@ -286,8 +319,6 @@
         <sRunDeb>0</sRunDeb>
         <sLrtime>0</sLrtime>
         <bEvRecOn>1</bEvRecOn>
-        <bSchkAxf>0</bSchkAxf>
-        <bTchkAxf>0</bTchkAxf>
         <nTsel>5</nTsel>
         <sDll></sDll>
         <sDllPa></sDllPa>
@@ -305,7 +336,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>DLGDARM</Key>
-          <Name>(1010=75,104,451,661,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=738,132,1159,559,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=859,49,1453,800,0)(131=828,47,1422,798,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(234=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)</Name>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(234=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -342,57 +373,9 @@
         <Bp>
           <Number>0</Number>
           <Type>0</Type>
-          <LineNumber>32</LineNumber>
+          <LineNumber>46</LineNumber>
           <EnabledFlag>1</EnabledFlag>
-          <Address>134218060</Address>
+          <Address>134219406</Address>
-          <ByteObject>0</ByteObject>
-          <HtxType>0</HtxType>
-          <ManyObjects>0</ManyObjects>
-          <SizeOfObject>0</SizeOfObject>
-          <BreakByAccess>0</BreakByAccess>
-          <BreakIfRCount>1</BreakIfRCount>
-          <Filename>..\Services\Chrono.c</Filename>
-          <ExecCommand></ExecCommand>
-          <Expression>\\NUCLEO_F103RB\../Services/Chrono.c\32</Expression>
-        </Bp>
-        <Bp>
-          <Number>1</Number>
-          <Type>0</Type>
-          <LineNumber>117</LineNumber>
-          <EnabledFlag>1</EnabledFlag>
-          <Address>134218120</Address>
-          <ByteObject>0</ByteObject>
-          <HtxType>0</HtxType>
-          <ManyObjects>0</ManyObjects>
-          <SizeOfObject>0</SizeOfObject>
-          <BreakByAccess>0</BreakByAccess>
-          <BreakIfRCount>1</BreakIfRCount>
-          <Filename>..\Services\Chrono.c</Filename>
-          <ExecCommand></ExecCommand>
-          <Expression>\\NUCLEO_F103RB\../Services/Chrono.c\117</Expression>
-        </Bp>
-        <Bp>
-          <Number>2</Number>
-          <Type>0</Type>
-          <LineNumber>20</LineNumber>
-          <EnabledFlag>1</EnabledFlag>
-          <Address>134218204</Address>
-          <ByteObject>0</ByteObject>
-          <HtxType>0</HtxType>
-          <ManyObjects>0</ManyObjects>
-          <SizeOfObject>0</SizeOfObject>
-          <BreakByAccess>0</BreakByAccess>
-          <BreakIfRCount>1</BreakIfRCount>
-          <Filename>..\MyDrivers\MyTimer.c</Filename>
-          <ExecCommand></ExecCommand>
-          <Expression>\\NUCLEO_F103RB\../MyDrivers/MyTimer.c\20</Expression>
-        </Bp>
-        <Bp>
-          <Number>3</Number>
-          <Type>0</Type>
-          <LineNumber>67</LineNumber>
-          <EnabledFlag>1</EnabledFlag>
-          <Address>134219134</Address>
           <ByteObject>0</ByteObject>
           <HtxType>0</HtxType>
           <ManyObjects>0</ManyObjects>
@@ -401,41 +384,9 @@
           <BreakIfRCount>1</BreakIfRCount>
           <Filename>../Src/main.c</Filename>
           <ExecCommand></ExecCommand>
-          <Expression>\\NUCLEO_F103RB\../Src/main.c\67</Expression>
+          <Expression>\\NUCLEO_F103RB\../Src/main.c\46</Expression>
         </Bp>
       </Breakpoint>
-      <WatchWindow1>
-        <Ww>
-          <count>0</count>
-          <WinNumber>1</WinNumber>
-          <ItemText>TIM1</ItemText>
-        </Ww>
-        <Ww>
-          <count>1</count>
-          <WinNumber>1</WinNumber>
-          <ItemText>GPIOB</ItemText>
-        </Ww>
-        <Ww>
-          <count>2</count>
-          <WinNumber>1</WinNumber>
-          <ItemText>SPI1</ItemText>
-        </Ww>
-        <Ww>
-          <count>3</count>
-          <WinNumber>1</WinNumber>
-          <ItemText>USART1</ItemText>
-        </Ww>
-        <Ww>
-          <count>4</count>
-          <WinNumber>1</WinNumber>
-          <ItemText>TIM2</ItemText>
-        </Ww>
-        <Ww>
-          <count>5</count>
-          <WinNumber>1</WinNumber>
-          <ItemText>Chrono_Time</ItemText>
-        </Ww>
-      </WatchWindow1>
       <Tracepoint>
         <THDelay>0</THDelay>
       </Tracepoint>
@@ -474,20 +425,8 @@
       <pszMrule></pszMrule>
       <pSingCmds></pSingCmds>
       <pMultCmds></pMultCmds>
-      <pMisraNamep></pMisraNamep>
-      <pszMrulep></pszMrulep>
-      <pSingCmdsp></pSingCmdsp>
-      <pMultCmdsp></pMultCmdsp>
-      <LogicAnalyzers>
-        <Wi>
-          <IntNumber>0</IntNumber>
-          <FirstString>`TIM2_CNT</FirstString>
-          <SecondString>FF00000000000000000000000000E0FFFFFFEF410000000000000000000000000000000054494D325F434E540000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000100000001000000000000000000F03F1800000000000000000000000000000000000000CE020008</SecondString>
-        </Wi>
-      </LogicAnalyzers>
       <DebugDescription>
         <Enable>1</Enable>
-        <EnableFlashSeq>0</EnableFlashSeq>
         <EnableLog>0</EnableLog>
         <Protocol>2</Protocol>
         <DbgClock>10000000</DbgClock>
@@ -525,7 +464,7 @@
       <GroupNumber>2</GroupNumber>
       <FileNumber>2</FileNumber>
       <FileType>1</FileType>
-      <tvExp>1</tvExp>
+      <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
       <PathWithFileName>..\Services\Chrono.c</PathWithFileName>
@@ -545,7 +484,7 @@
       <GroupNumber>3</GroupNumber>
       <FileNumber>3</FileNumber>
       <FileType>1</FileType>
-      <tvExp>1</tvExp>
+      <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
       <PathWithFileName>..\MyDrivers\MyTimer.c</PathWithFileName>
@@ -585,6 +524,18 @@
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>6</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\LLDrivers\src\stm32f1xx_ll_tim.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f1xx_ll_tim.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
   </Group>
 
   <Group>
@@ -595,7 +546,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>5</GroupNumber>
-      <FileNumber>6</FileNumber>
+      <FileNumber>7</FileNumber>
       <FileType>5</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -615,7 +566,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>7</FileNumber>
+      <FileNumber>8</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -635,7 +586,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>7</GroupNumber>
-      <FileNumber>8</FileNumber>
+      <FileNumber>9</FileNumber>
       <FileType>2</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>

MDK-ARM/Project.uvprojx

@@ -10,13 +10,12 @@
       <TargetName>NUCLEO-F103RB</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
-      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
-      <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>STM32F103RB</Device>
           <Vendor>STMicroelectronics</Vendor>
-          <PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
+          <PackID>Keil.STM32F1xx_DFP.2.2.0</PackID>
           <PackURL>http://www.keil.com/pack/</PackURL>
           <Cpu>IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x801FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3")</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
@@ -184,460 +183,6 @@
             <hadXRAM>0</hadXRAM>
             <uocXRam>0</uocXRam>
             <RvdsVP>0</RvdsVP>
-            <RvdsMve>0</RvdsMve>
-            <hadIRAM2>0</hadIRAM2>
-            <hadIROM2>0</hadIROM2>
-            <StupSel>8</StupSel>
-            <useUlib>1</useUlib>
-            <EndSel>0</EndSel>
-            <uLtcg>0</uLtcg>
-            <nSecure>0</nSecure>
-            <RoSelD>3</RoSelD>
-            <RwSelD>3</RwSelD>
-            <CodeSel>0</CodeSel>
-            <OptFeed>0</OptFeed>
-            <NoZi1>0</NoZi1>
-            <NoZi2>0</NoZi2>
-            <NoZi3>0</NoZi3>
-            <NoZi4>0</NoZi4>
-            <NoZi5>0</NoZi5>
-            <Ro1Chk>0</Ro1Chk>
-            <Ro2Chk>0</Ro2Chk>
-            <Ro3Chk>0</Ro3Chk>
-            <Ir1Chk>1</Ir1Chk>
-            <Ir2Chk>0</Ir2Chk>
-            <Ra1Chk>0</Ra1Chk>
-            <Ra2Chk>0</Ra2Chk>
-            <Ra3Chk>0</Ra3Chk>
-            <Im1Chk>1</Im1Chk>
-            <Im2Chk>0</Im2Chk>
-            <OnChipMemories>
-              <Ocm1>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm1>
-              <Ocm2>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm2>
-              <Ocm3>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm3>
-              <Ocm4>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm4>
-              <Ocm5>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm5>
-              <Ocm6>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm6>
-              <IRAM>
-                <Type>0</Type>
-                <StartAddress>0x20000000</StartAddress>
-                <Size>0x5000</Size>
-              </IRAM>
-              <IROM>
-                <Type>1</Type>
-                <StartAddress>0x8000000</StartAddress>
-                <Size>0x20000</Size>
-              </IROM>
-              <XRAM>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </XRAM>
-              <OCR_RVCT1>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT1>
-              <OCR_RVCT2>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT2>
-              <OCR_RVCT3>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT3>
-              <OCR_RVCT4>
-                <Type>1</Type>
-                <StartAddress>0x8000000</StartAddress>
-                <Size>0x20000</Size>
-              </OCR_RVCT4>
-              <OCR_RVCT5>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT5>
-              <OCR_RVCT6>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT6>
-              <OCR_RVCT7>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT7>
-              <OCR_RVCT8>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT8>
-              <OCR_RVCT9>
-                <Type>0</Type>
-                <StartAddress>0x20000000</StartAddress>
-                <Size>0x5000</Size>
-              </OCR_RVCT9>
-              <OCR_RVCT10>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT10>
-            </OnChipMemories>
-            <RvctStartVector></RvctStartVector>
-          </ArmAdsMisc>
-          <Cads>
-            <interw>1</interw>
-            <Optim>4</Optim>
-            <oTime>0</oTime>
-            <SplitLS>0</SplitLS>
-            <OneElfS>1</OneElfS>
-            <Strict>0</Strict>
-            <EnumInt>0</EnumInt>
-            <PlainCh>0</PlainCh>
-            <Ropi>0</Ropi>
-            <Rwpi>0</Rwpi>
-            <wLevel>2</wLevel>
-            <uThumb>0</uThumb>
-            <uSurpInc>0</uSurpInc>
-            <uC99>0</uC99>
-            <uGnu>0</uGnu>
-            <useXO>0</useXO>
-            <v6Lang>1</v6Lang>
-            <v6LangP>1</v6LangP>
-            <vShortEn>1</vShortEn>
-            <vShortWch>1</vShortWch>
-            <v6Lto>0</v6Lto>
-            <v6WtE>0</v6WtE>
-            <v6Rtti>0</v6Rtti>
-            <VariousControls>
-              <MiscControls>--C99</MiscControls>
-              <Define>STM32F103xB,USE_FULL_LL_DRIVER,HSE_VALUE=8000000U</Define>
-              <Undefine></Undefine>
-              <IncludePath>..\Inc;..\LLDrivers\inc;..\Services;..\MyDrivers</IncludePath>
-            </VariousControls>
-          </Cads>
-          <Aads>
-            <interw>1</interw>
-            <Ropi>0</Ropi>
-            <Rwpi>0</Rwpi>
-            <thumb>0</thumb>
-            <SplitLS>0</SplitLS>
-            <SwStkChk>0</SwStkChk>
-            <NoWarn>0</NoWarn>
-            <uSurpInc>0</uSurpInc>
-            <useXO>0</useXO>
-            <uClangAs>0</uClangAs>
-            <VariousControls>
-              <MiscControls></MiscControls>
-              <Define></Define>
-              <Undefine></Undefine>
-              <IncludePath></IncludePath>
-            </VariousControls>
-          </Aads>
-          <LDads>
-            <umfTarg>1</umfTarg>
-            <Ropi>0</Ropi>
-            <Rwpi>0</Rwpi>
-            <noStLib>0</noStLib>
-            <RepFail>1</RepFail>
-            <useFile>0</useFile>
-            <TextAddressRange>0x08000000</TextAddressRange>
-            <DataAddressRange>0x20000000</DataAddressRange>
-            <pXoBase></pXoBase>
-            <ScatterFile></ScatterFile>
-            <IncludeLibs></IncludeLibs>
-            <IncludeLibsPath></IncludeLibsPath>
-            <Misc></Misc>
-            <LinkerInputFile></LinkerInputFile>
-            <DisabledWarnings></DisabledWarnings>
-          </LDads>
-        </TargetArmAds>
-      </TargetOption>
-      <Groups>
-        <Group>
-          <GroupName>User Application</GroupName>
-          <Files>
-            <File>
-              <FileName>main.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>../Src/main.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>User Services</GroupName>
-          <Files>
-            <File>
-              <FileName>Chrono.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\Services\Chrono.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>MyDrivers</GroupName>
-          <Files>
-            <File>
-              <FileName>MyTimer.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\MyDrivers\MyTimer.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>Drivers/STM32f1xx_LL_Driver</GroupName>
-          <Files>
-            <File>
-              <FileName>stm32f1xx_ll_rcc.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\LLDrivers\src\stm32f1xx_ll_rcc.c</FilePath>
-            </File>
-            <File>
-              <FileName>stm32f1xx_ll_utils.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\LLDrivers\src\stm32f1xx_ll_utils.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>Doc</GroupName>
-          <Files>
-            <File>
-              <FileName>readme.txt</FileName>
-              <FileType>5</FileType>
-              <FilePath>../readme.txt</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>Drivers/CMSIS</GroupName>
-          <Files>
-            <File>
-              <FileName>system_stm32f1xx.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>../Src/system_stm32f1xx.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>Example/MDK-ARM</GroupName>
-          <Files>
-            <File>
-              <FileName>startup_stm32f103xb.s</FileName>
-              <FileType>2</FileType>
-              <FilePath>startup_stm32f103xb.s</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>::CMSIS</GroupName>
-        </Group>
-      </Groups>
-    </Target>
-    <Target>
-      <TargetName>Simulateur</TargetName>
-      <ToolsetNumber>0x4</ToolsetNumber>
-      <ToolsetName>ARM-ADS</ToolsetName>
-      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
-      <uAC6>0</uAC6>
-      <TargetOption>
-        <TargetCommonOption>
-          <Device>STM32F103RB</Device>
-          <Vendor>STMicroelectronics</Vendor>
-          <PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
-          <PackURL>http://www.keil.com/pack/</PackURL>
-          <Cpu>IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x801FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3")</Cpu>
-          <FlashUtilSpec></FlashUtilSpec>
-          <StartupFile></StartupFile>
-          <FlashDriverDll></FlashDriverDll>
-          <DeviceId></DeviceId>
-          <RegisterFile></RegisterFile>
-          <MemoryEnv></MemoryEnv>
-          <Cmp></Cmp>
-          <Asm></Asm>
-          <Linker></Linker>
-          <OHString></OHString>
-          <InfinionOptionDll></InfinionOptionDll>
-          <SLE66CMisc></SLE66CMisc>
-          <SLE66AMisc></SLE66AMisc>
-          <SLE66LinkerMisc></SLE66LinkerMisc>
-          <SFDFile>$$Device:STM32F103RB$SVD\STM32F103xx.svd</SFDFile>
-          <bCustSvd>0</bCustSvd>
-          <UseEnv>0</UseEnv>
-          <BinPath></BinPath>
-          <IncludePath></IncludePath>
-          <LibPath></LibPath>
-          <RegisterFilePath></RegisterFilePath>
-          <DBRegisterFilePath></DBRegisterFilePath>
-          <TargetStatus>
-            <Error>0</Error>
-            <ExitCodeStop>0</ExitCodeStop>
-            <ButtonStop>0</ButtonStop>
-            <NotGenerated>0</NotGenerated>
-            <InvalidFlash>1</InvalidFlash>
-          </TargetStatus>
-          <OutputDirectory>NUCLEO-F103RB\</OutputDirectory>
-          <OutputName>NUCLEO-F103RB</OutputName>
-          <CreateExecutable>1</CreateExecutable>
-          <CreateLib>0</CreateLib>
-          <CreateHexFile>0</CreateHexFile>
-          <DebugInformation>1</DebugInformation>
-          <BrowseInformation>1</BrowseInformation>
-          <ListingPath></ListingPath>
-          <HexFormatSelection>1</HexFormatSelection>
-          <Merge32K>0</Merge32K>
-          <CreateBatchFile>0</CreateBatchFile>
-          <BeforeCompile>
-            <RunUserProg1>0</RunUserProg1>
-            <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
-            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
-            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
-            <nStopU1X>0</nStopU1X>
-            <nStopU2X>0</nStopU2X>
-          </BeforeCompile>
-          <BeforeMake>
-            <RunUserProg1>0</RunUserProg1>
-            <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
-            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
-            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
-            <nStopB1X>0</nStopB1X>
-            <nStopB2X>0</nStopB2X>
-          </BeforeMake>
-          <AfterMake>
-            <RunUserProg1>0</RunUserProg1>
-            <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
-            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
-            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
-            <nStopA1X>0</nStopA1X>
-            <nStopA2X>0</nStopA2X>
-          </AfterMake>
-          <SelectedForBatchBuild>0</SelectedForBatchBuild>
-          <SVCSIdString></SVCSIdString>
-        </TargetCommonOption>
-        <CommonProperty>
-          <UseCPPCompiler>0</UseCPPCompiler>
-          <RVCTCodeConst>0</RVCTCodeConst>
-          <RVCTZI>0</RVCTZI>
-          <RVCTOtherData>0</RVCTOtherData>
-          <ModuleSelection>0</ModuleSelection>
-          <IncludeInBuild>1</IncludeInBuild>
-          <AlwaysBuild>0</AlwaysBuild>
-          <GenerateAssemblyFile>0</GenerateAssemblyFile>
-          <AssembleAssemblyFile>0</AssembleAssemblyFile>
-          <PublicsOnly>0</PublicsOnly>
-          <StopOnExitCode>3</StopOnExitCode>
-          <CustomArgument></CustomArgument>
-          <IncludeLibraryModules></IncludeLibraryModules>
-          <ComprImg>0</ComprImg>
-        </CommonProperty>
-        <DllOption>
-          <SimDllName>SARMCM3.DLL</SimDllName>
-          <SimDllArguments></SimDllArguments>
-          <SimDlgDll>DARMSTM.DLL</SimDlgDll>
-          <SimDlgDllArguments>-pSTM32F103RB</SimDlgDllArguments>
-          <TargetDllName>SARMCM3.DLL</TargetDllName>
-          <TargetDllArguments></TargetDllArguments>
-          <TargetDlgDll>TARMSTM.DLL</TargetDlgDll>
-          <TargetDlgDllArguments>-pSTM32F103RB</TargetDlgDllArguments>
-        </DllOption>
-        <DebugOption>
-          <OPTHX>
-            <HexSelection>1</HexSelection>
-            <HexRangeLowAddress>0</HexRangeLowAddress>
-            <HexRangeHighAddress>0</HexRangeHighAddress>
-            <HexOffset>0</HexOffset>
-            <Oh166RecLen>16</Oh166RecLen>
-          </OPTHX>
-        </DebugOption>
-        <Utilities>
-          <Flash1>
-            <UseTargetDll>1</UseTargetDll>
-            <UseExternalTool>0</UseExternalTool>
-            <RunIndependent>0</RunIndependent>
-            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
-            <Capability>1</Capability>
-            <DriverSelection>4107</DriverSelection>
-          </Flash1>
-          <bUseTDR>1</bUseTDR>
-          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
-          <Flash3></Flash3>
-          <Flash4></Flash4>
-          <pFcarmOut></pFcarmOut>
-          <pFcarmGrp></pFcarmGrp>
-          <pFcArmRoot></pFcArmRoot>
-          <FcArmLst>0</FcArmLst>
-        </Utilities>
-        <TargetArmAds>
-          <ArmAdsMisc>
-            <GenerateListings>0</GenerateListings>
-            <asHll>1</asHll>
-            <asAsm>1</asAsm>
-            <asMacX>1</asMacX>
-            <asSyms>1</asSyms>
-            <asFals>1</asFals>
-            <asDbgD>1</asDbgD>
-            <asForm>1</asForm>
-            <ldLst>0</ldLst>
-            <ldmm>1</ldmm>
-            <ldXref>1</ldXref>
-            <BigEnd>0</BigEnd>
-            <AdsALst>1</AdsALst>
-            <AdsACrf>1</AdsACrf>
-            <AdsANop>0</AdsANop>
-            <AdsANot>0</AdsANot>
-            <AdsLLst>1</AdsLLst>
-            <AdsLmap>1</AdsLmap>
-            <AdsLcgr>1</AdsLcgr>
-            <AdsLsym>1</AdsLsym>
-            <AdsLszi>1</AdsLszi>
-            <AdsLtoi>1</AdsLtoi>
-            <AdsLsun>1</AdsLsun>
-            <AdsLven>1</AdsLven>
-            <AdsLsxf>1</AdsLsxf>
-            <RvctClst>0</RvctClst>
-            <GenPPlst>0</GenPPlst>
-            <AdsCpuType>"Cortex-M3"</AdsCpuType>
-            <RvctDeviceName></RvctDeviceName>
-            <mOS>0</mOS>
-            <uocRom>0</uocRom>
-            <uocRam>0</uocRam>
-            <hadIROM>1</hadIROM>
-            <hadIRAM>1</hadIRAM>
-            <hadXRAM>0</hadXRAM>
-            <uocXRam>0</uocXRam>
-            <RvdsVP>0</RvdsVP>
-            <RvdsMve>0</RvdsMve>
             <hadIRAM2>0</hadIRAM2>
             <hadIROM2>0</hadIROM2>
             <StupSel>8</StupSel>
@@ -778,7 +323,6 @@
             <uThumb>0</uThumb>
             <uSurpInc>0</uSurpInc>
             <uC99>0</uC99>
-            <uGnu>0</uGnu>
             <useXO>0</useXO>
             <v6Lang>1</v6Lang>
             <v6LangP>1</v6LangP>
@@ -789,7 +333,7 @@
             <v6Rtti>0</v6Rtti>
             <VariousControls>
               <MiscControls>--C99</MiscControls>
-              <Define>STM32F103xB,USE_FULL_LL_DRIVER,HSE_VALUE=8000000U</Define>
+              <Define>STM32F103xB,USE_FULL_LL_DRIVER,HSE_VALUE=8000000U,USE_FULL_ASSERT</Define>
               <Undefine></Undefine>
               <IncludePath>..\Inc;..\LLDrivers\inc;..\Services;..\MyDrivers</IncludePath>
             </VariousControls>
@@ -875,6 +419,466 @@
               <FileType>1</FileType>
               <FilePath>..\LLDrivers\src\stm32f1xx_ll_utils.c</FilePath>
             </File>
+            <File>
+              <FileName>stm32f1xx_ll_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\LLDrivers\src\stm32f1xx_ll_tim.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Doc</GroupName>
+          <Files>
+            <File>
+              <FileName>readme.txt</FileName>
+              <FileType>5</FileType>
+              <FilePath>../readme.txt</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers/CMSIS</GroupName>
+          <Files>
+            <File>
+              <FileName>system_stm32f1xx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>../Src/system_stm32f1xx.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Example/MDK-ARM</GroupName>
+          <Files>
+            <File>
+              <FileName>startup_stm32f103xb.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>startup_stm32f103xb.s</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>::CMSIS</GroupName>
+        </Group>
+      </Groups>
+    </Target>
+    <Target>
+      <TargetName>Simulateur</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F103RB</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32F1xx_DFP.2.2.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x801FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3")</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId></DeviceId>
+          <RegisterFile></RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32F103RB$SVD\STM32F103xx.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>NUCLEO-F103RB\</OutputDirectory>
+          <OutputName>NUCLEO-F103RB</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath></ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>0</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll>DARMSTM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pSTM32F103RB</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments></TargetDllArguments>
+          <TargetDlgDll>TARMSTM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pSTM32F103RB</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4107</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M3"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>0</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x5000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x20000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x5000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>0</uC99>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls>--C99</MiscControls>
+              <Define>STM32F103xB,USE_FULL_LL_DRIVER,HSE_VALUE=8000000U,USE_FULL_ASSERT</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\Inc;..\LLDrivers\inc;..\Services;..\MyDrivers</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>User Application</GroupName>
+          <Files>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>../Src/main.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>User Services</GroupName>
+          <Files>
+            <File>
+              <FileName>Chrono.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Services\Chrono.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>MyDrivers</GroupName>
+          <Files>
+            <File>
+              <FileName>MyTimer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\MyDrivers\MyTimer.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers/STM32f1xx_LL_Driver</GroupName>
+          <Files>
+            <File>
+              <FileName>stm32f1xx_ll_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\LLDrivers\src\stm32f1xx_ll_rcc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f1xx_ll_utils.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\LLDrivers\src\stm32f1xx_ll_utils.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f1xx_ll_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\LLDrivers\src\stm32f1xx_ll_tim.c</FilePath>
+            </File>
           </Files>
         </Group>
         <Group>

MyDrivers/MyTimer.c

@@ -10,103 +10,173 @@
 				  pour mettre à 0  , reg = reg&~ Mask (ou Mask est le représente le ou les bits à positionner à 0)
  
 */ 
-#include "stm32f103xb.h" 
 
-void (* ptrfonc1)(void);
+#include "MyTimer.h"
-void (* ptrfonc2)(void);
+#include "stm32f1xx_ll_bus.h" // Pour l'activation des horloges
-void (* ptrfonc3)(void);
+#include "stm32f1xx_ll_tim.h" 
-void (* ptrfonc4)(void);
 
-void MyTimer_Conf(TIM_TypeDef * Timer,int Arr, int Psc) {
+
-	int valid = 1;
+// variable pointeur de fonction permettant de mémoriser le callback à appeler depuis
-	if (Timer == TIM1) {
+// le handler d'IT
-		RCC->APB2ENR |= RCC_APB2ENR_TIM1EN;
+void (*Ptr_ItFct_TIM1)(void); 
-	} else if (Timer == TIM2) {
+void (*Ptr_ItFct_TIM2)(void); 
-		RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
+void (*Ptr_ItFct_TIM3)(void); 
-	} else if (Timer == TIM3) {
+void (*Ptr_ItFct_TIM4)(void); 
-		RCC->APB1ENR |= RCC_APB1ENR_TIM3EN;
+
-	} else if (Timer == TIM4) {
+
-		RCC->APB1ENR |= RCC_APB1ENR_TIM4EN;
+
-	} else {
+
-		valid = 0;
+/**
-	}
+	* @brief  Active l'horloge et règle l'ARR et le PSC du timer visé
+  * @note   Fonction à lancer avant toute autre. Le timer n'est pas encore lancé (voir MyTimerStart)
+	* @param  TIM_TypeDef Timer : indique le timer à utiliser par le chronomètre, TIM1, TIM2, TIM3 ou TIM4
+	* 				int Arr   : valeur à placer dans ARR
+	*					int Psc   : valeur à placer dans PSC
+  * @retval None
+  */
+void MyTimer_Conf(TIM_TypeDef * Timer,int Arr, int Psc)
+{
+	LL_TIM_InitTypeDef My_LL_Tim_Init_Struct;
+	
+	// Validation horloge locale
+	if (Timer==TIM1) LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM1);
+	else if (Timer==TIM2) LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2);
+	else if (Timer==TIM3) LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM3);
+	else  LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM4);
+	
+	// chargement structure Arr, Psc, Up Count
+	My_LL_Tim_Init_Struct.Autoreload=Arr;
+	My_LL_Tim_Init_Struct.Prescaler=Psc;
+	My_LL_Tim_Init_Struct.ClockDivision=LL_TIM_CLOCKDIVISION_DIV1;
+	My_LL_Tim_Init_Struct.CounterMode=LL_TIM_COUNTERMODE_UP;
+	My_LL_Tim_Init_Struct.RepetitionCounter=0;
+	
+	LL_TIM_Init(Timer,&My_LL_Tim_Init_Struct);
 	
-	if (valid) {
-		Timer->ARR = Arr;
-		Timer->PSC = Psc;
-	}
-}
 
-void MyTimer_Start(TIM_TypeDef * Timer) {
+	// Blocage IT
-	Timer->CR1 |= TIM_CR1_CEN;
+	LL_TIM_DisableIT_UPDATE(Timer);
-}
+	
+	
+	// Blocage Timer
+	LL_TIM_DisableCounter(Timer);
+	
 
-void MyTimer_Stop(TIM_TypeDef * Timer) {
+		
-	Timer->CR1 &= ~TIM_CR1_CEN;
-}
-
-void MyTimer_IT_Conf(TIM_TypeDef * Timer, void (*IT_function) (void),int Prio) {
-	if (Timer == TIM1) {
-		NVIC->ISER[0] = NVIC->ISER[0] | (1 << 25);
-		NVIC->IP[25] = NVIC->IP[25] | (Prio << 4);
-		ptrfonc1 = IT_function;
-	} else if (Timer == TIM2) {
-		NVIC->ISER[0] = NVIC->ISER[0] | (1 << 28);
-		NVIC->IP[28] = NVIC->IP[28] | (Prio << 4);
-		ptrfonc2 = IT_function;
-	} else if (Timer == TIM3) {
-		NVIC->ISER[0] = NVIC->ISER[0] | (1 << 29);
-		NVIC->IP[29] = NVIC->IP[29] | (Prio << 4);
-		ptrfonc3 = IT_function;
-	} else if (Timer == TIM4) {
-		NVIC->ISER[0] = NVIC->ISER[0] | (1 << 30);
-		NVIC->IP[30] = NVIC->IP[30] | (Prio << 4);
-		ptrfonc4 = IT_function;
-	}
 }
 
 
-void MyTimer_IT_Enable(TIM_TypeDef * Timer) {
+/**
-	if (Timer == TIM1) {
+	* @brief  Démarre le timer considéré
-		TIM1->DIER |= TIM_DIER_UIE;
+  * @note   
-	} else if (Timer == TIM2) {
+	* @param  TIM_TypeDef Timer : indique le timer à utiliser par le chronomètre, TIM1, TIM2, TIM3 ou TIM4
-		TIM2->DIER |= TIM_DIER_UIE;	
+  * @retval None
-	} else if (Timer == TIM3) {
+  */
-		TIM3->DIER |= TIM_DIER_UIE;
+void MyTimer_Start(TIM_TypeDef * Timer)
-	} else if (Timer == TIM4) {
+{
-		TIM4->DIER |= TIM_DIER_UIE;
+		LL_TIM_EnableCounter(Timer);
-	}
+}
+
+/**
+	* @brief  Arrêt le timer considéré
+  * @note   
+	* @param  TIM_TypeDef Timer : indique le timer à utiliser par le chronomètre, TIM1, TIM2, TIM3 ou TIM4
+  * @retval None
+  */
+void MyTimer_Stop(TIM_TypeDef * Timer)
+{
+	LL_TIM_DisableCounter(Timer);
 }
 
 
-void MyTimer_IT_Disable(TIM_TypeDef * Timer) {
+/**
-	if (Timer == TIM1) {
+	* @brief  Configure le Timer considéré en interruption sur débordement.
-		TIM1->DIER &= ~TIM_DIER_UIE;
+  * @note   A ce stade, les interruptions ne sont pas validés (voir  MyTimer_IT_Enable )
-	} else if (Timer == TIM2) {
+	* @param  TIM_TypeDef Timer : indique le timer à utiliser par le chronomètre, TIM1, TIM2, TIM3 ou TIM4
-		TIM2->DIER &= ~TIM_DIER_UIE;	
+	* 				void (*IT_function) (void) : nom (adresse) de la fonction à lancer sur interruption
-	} else if (Timer == TIM3) {
+	*         int Prio : priorité associée à l'interruption
-		TIM3->DIER &= ~TIM_DIER_UIE;
+  * @retval None
-	} else if (Timer == TIM4) {
+  */
-		TIM4->DIER &= ~TIM_DIER_UIE;
+void MyTimer_IT_Conf(TIM_TypeDef * Timer, void (*IT_function) (void),int Prio)
-	}
+{
+	// affectation de la fonction
+	if (Timer==TIM1) Ptr_ItFct_TIM1=IT_function;
+	else if (Timer==TIM2)	Ptr_ItFct_TIM2=IT_function;
+	else if (Timer==TIM3)	Ptr_ItFct_TIM3=IT_function;
+	else  Ptr_ItFct_TIM4=IT_function;
+
+	
+	// Blocage IT (il faudra la débloquer voir fct suivante)
+	LL_TIM_DisableIT_UPDATE(Timer);
+	
+	// validation du canal NVIC
+	IRQn_Type TIM_irq;
+	
+	if (Timer==TIM1) TIM_irq=TIM1_UP_IRQn;
+	else if (Timer==TIM2)	TIM_irq=TIM2_IRQn;
+	else if (Timer==TIM3)	TIM_irq=TIM3_IRQn;
+	else 	TIM_irq=TIM4_IRQn;
+	
+	NVIC_SetPriority(TIM_irq, Prio);
+	NVIC_EnableIRQ(TIM_irq);
+
+	
 }
 
 
-void TIM1_UP_IRQHandler(void) {
+/**
-	TIM1->SR &= ~TIM_SR_UIF;
+	* @brief  Autorise les interruptions
-	(*ptrfonc1)();
+  * @note   
+	* @param  TIM_TypeDef Timer : indique le timer à utiliser par le chronomètre, TIM1, TIM2, TIM3 ou TIM4
+  * @retval None
+  */
+void MyTimer_IT_Enable(TIM_TypeDef * Timer)
+{
+		LL_TIM_EnableIT_UPDATE(Timer);
 }
 
-void TIM2_IRQHandler(void) {
-	TIM2->SR &= ~TIM_SR_UIF;
-	(*ptrfonc2)();
-}
 
-void TIM3_IRQHandler(void) {
+/**
-	TIM3->SR &= ~TIM_SR_UIF;
+	* @brief  Interdit les interruptions
-	(*ptrfonc3)();
+  * @note   
-}
+	* @param  TIM_TypeDef Timer : indique le timer à utiliser par le chronomètre, TIM1, TIM2, TIM3 ou TIM4
-void TIM4_IRQHandler(void) {
+  * @retval None
-	TIM4->SR &= ~TIM_SR_UIF;
+  */
-	(*ptrfonc4)();
+void MyTimer_IT_Disable(TIM_TypeDef * Timer)
-}
+{
+			LL_TIM_DisableIT_UPDATE(Timer); 
+}	
+
+
+/*
+============ LES INTERRUPTIONS =================================
+
+*/
+
+void TIM1_UP_IRQHandler(void)
+{
+	// rabaisser le flag d'IT
+	LL_TIM_ClearFlag_UPDATE(TIM1);
+	(*Ptr_ItFct_TIM1)();
+}	
+
+void TIM2_IRQHandler(void)
+{
+	// rabaisser le flag d'IT
+	LL_TIM_ClearFlag_UPDATE(TIM2);
+	(*Ptr_ItFct_TIM2)();
+}	
+
+void TIM3_IRQHandler(void)
+{
+	// rabaisser le flag d'IT
+	LL_TIM_ClearFlag_UPDATE(TIM3);
+	(*Ptr_ItFct_TIM3)();
+}	
+
+void TIM4_IRQHandler(void)
+{
+	// rabaisser le flag d'IT
+	LL_TIM_ClearFlag_UPDATE(TIM4);
+	(*Ptr_ItFct_TIM4)();
+}	

Services/Chrono.c

@@ -37,10 +37,10 @@ void Chrono_Conf(TIM_TypeDef * Timer)
 	Chrono_Timer=Timer;
 
 	// Réglage Timer pour un débordement à 10ms
-	MyTimer_Conf(Chrono_Timer, 99, 7199);
+	MyTimer_Conf(Chrono_Timer,999, 719);
 	
 	// Réglage interruption du Timer avec callback : Chrono_Task_10ms()
-	MyTimer_IT_Conf(Chrono_Timer, Chrono_Task_10ms, 7);
+	MyTimer_IT_Conf(Chrono_Timer, Chrono_Task_10ms,3);
 	
 	// Validation IT
 	MyTimer_IT_Enable(Chrono_Timer);
@@ -57,7 +57,6 @@ void Chrono_Conf(TIM_TypeDef * Timer)
   */
 void Chrono_Start(void)
 {
-	// Lancement du Timer
 	MyTimer_Start(Chrono_Timer);
 }
 
@@ -113,7 +112,7 @@ Time * Chrono_Read(void)
   * @retval Aucun
   */
 void Chrono_Task_10ms(void)
-{
+{ 
 	Chrono_Time.Hund++;
 	if (Chrono_Time.Hund==100)
 	{

Services/Chrono.h

@@ -11,6 +11,37 @@ Utilise la lib MyTimers.h /.c
 
 #include "stm32f103xb.h" 
 
+/* =====================================================================================
+Les fonctions qui gèrent les IO (ajout par rapport à l'activité 1)
+=======================================================================================*/
+
+
+#define PinStart LL_GPIO_PIN_8
+#define PinStop LL_GPIO_PIN_6
+// à compléter pour la pin reset du chronometre
+#define PinLED LL_GPIO_PIN_10
+#define GPIO_Pin GPIOC
+#define GPIO_LED GPIOC
+
+
+
+
+
+
+/**
+	* @brief  polle les 3 entrées et gènère les actions à faire
+  * @note   Fct à lancer en tâche de fond (non bloquante)
+	* @param  None 
+  * @retval None
+  */
+		
+void Chrono_Background(void);
+
+//=======================================================================================//
+
+
+
+
 // Type de donnée utilisé dans le module
 
 typedef struct {
@@ -31,6 +62,10 @@ typedef struct {
 void Chrono_Conf(TIM_TypeDef * Timer);
 
 
+
+
+
+
 /**
 	* @brief  Démarre le chronomètre. 
   * @note   si la durée dépasse 59mn 59sec 99 cent, elle est remise à zéro et repart
@@ -66,4 +101,7 @@ void Chrono_Reset(void);
   */
 Time * Chrono_Read(void);
 
+
+
+
 #endif

Src/main.c

@@ -31,53 +31,25 @@ void  SystemClock_Config(void);
   * @param  None
   * @retval None
   */
+	
+
 int main(void)
-{	
+{
   /* Configure the system clock to 72 MHz */
   SystemClock_Config();
 
-	
-	/* DU BLABLA POUR JOUER AU DéBUT 
-	TIM1->CR2|=0x1 ;
-	TIM1->CR2=0xFFFF ;
-	TIM1->CR2 &= ~0x0040 ;
-	TIM1->CR2=0xFFFF ;
-	TIM1->CR2&=~(1<<6) ; 
-	GPIOB->CRL=(0xFFFF ) ;
-	GPIOB->CRL&=~(0xF<<8) ;
-	GPIOB->CRL|= (0x5<<8) ;
-	GPIOB->ODR|=GPIO_ODR_ODR1 ;
-	SPI1->CR1 |= 0x2;
-	
-	SPI1->CR1 = 0xFFFF;
-	SPI1->CR1 &= ~SPI_CR1_DFF;
-	USART1->CR2 = 0xFFFFFFFF;
-	USART1->CR2 &= ~USART_CR2_STOP;
-	USART1->CR2 |= (0x2 << USART_CR2_STOP_Pos);*/
-	
-	
   /* Add your application code here */
   // Configuration chronomètre
-	Chrono_Conf(TIM1);
+	Chrono_Conf(TIM3);
 	
 	// Lancement chronomètre
-	//Chrono_Start(); 
+	Chrono_Start(); 
+	
+
   
   /* Infinite loop */
-	RCC->APB2ENR |= RCC_APB2ENR_IOPCEN;
-	GPIOC->CRH &= ~(0xF << 0);
-	GPIOC->CRH |= (0x4 << 0);
-	GPIOC->CRH &= ~(0xF << 8);
-	GPIOC->CRH |= (0x6 << 8);
-	
   while (1)
   {
-		int valeur_bouton = (GPIOC->IDR & (1 << 8)) >> 8;
-		if (valeur_bouton) {
-			GPIOC->ODR &= ~(1 << 10);
-		} else {
-			GPIOC->ODR |= (1 << 10);
-		}
   }
 }
 
@@ -136,7 +108,7 @@ void SystemClock_Config(void)
   LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
 
   /* Set systick to 1ms in using frequency set to 72MHz */
-  //LL_Init1msTick(72000000); !! décommenter que si l'IT est récupérée
+  LL_Init1msTick(72000000); // utile lorsqu'on utilise la fonction LL_mDelay
 
   /* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
   LL_SetSystemCoreClock(72000000);

readme.txt

@@ -49,11 +49,8 @@ main.h enlevé
 Remarque ligne 72   LL_RCC_HSE_EnableBypass();, si on devait travailler sur MCBSTM32, il faudrait commenter la ligne
 Ligne 108 commentée, il s'agit de l'activation systick inutile mais qui active les IT non récupérée ... donc otée
 
-*********************** FIN DES MODIFICATIONS    ************************************************
 
 
-Readme d'origine ...
-
 
 
 /**