marce/Voilier
1
0
Fork 0
Code Issues Pull-Requests Releases Wiki Aktivität

UART a tester

Quellcode durchsuchen
Dieser Commit ist enthalten in:
Chanfreau 2023-04-03 19:53:52 +02:00
Ursprung 541f57dbef
Commit ad13b10022
10 geänderte Dateien mit 3653 neuen und 103 gelöschten Zeilen
Statistiken anzeigen Patch-Datei herunterladen Diff-Datei herunterladen Alle Dateien ausklappen Alle Dateien einklappen

6
Drivers/Include/Driver_Timer.h
Datei anzeigen

@ -14,5 +14,11 @@ typedef struct
void MyTimer_Base_Init(MyTimer_Struct_TypeDef * Timer);
void MyTimer_Base_Start(TIM_TypeDef * Timer);
void MyTimer_Base_Stop(TIM_TypeDef * Timer);
void MyTimer_PWM( MyTimer_Struct_TypeDef * Timer, uint16_t cycle);
/*#define MyTimer_Base_Start(Timer)
#define MyTimer_Base_Stop(Timer)
*/
#endif

22
Drivers/Include/Driver_UART.h Normale Datei
Datei anzeigen

@ -0,0 +1,22 @@
#ifndef MYUART_H
#define MYUART_H
#include "stm32f10x.h"
typedef struct {
USART_TypeDef * UART;
unsigned int baudrate;
}MyUART_Struct_Typedef;
void UART_send(char data);
char UART_read(char data, MyUART_Struct_Typedef * UART);
void UART_init(MyUART_Struct_Typedef * UART);
void USART1_IRQHandler(void);
void USART2_IRQHandler(void);
void USART3_IRQHandler(void);
#endif

8
Drivers/Sources/Driver_Timer.c
Datei anzeigen

@ -36,3 +36,11 @@ void MyTimer_Base_Stop(TIM_TypeDef * Timer){
}
void MyTimer_PWM( MyTimer_Struct_TypeDef * Timer, uint16_t cycle){
Timer->Timer->CCMR1 &= ~TIM_CCMR1_OC1M_0; //Configuration du canal CH1
Timer->Timer->CCMR1 |= TIM_CCMR1_OC1M_1| TIM_CCMR1_OC1M_2; // Ajouter 110 aux bits OC1M (registre CCMR1)
Timer->Timer->CCER |= TIM_CCER_CC1E; // Canal CH1 validé par bit CC1E (registre CCER)
Timer->Timer->CR1 |= TIM_CR1_CEN; // Lancement du timer
Timer->Timer->CCR1 = (cycle * Timer->ARR) / 100; // Fixer la durée à 20%
}

93
Drivers/Sources/Driver_UART.c Normale Datei
Datei anzeigen

@ -0,0 +1,93 @@
#include "Driver_UART.h"
char received_data1, received_data2, received_data3;
void UART_init(MyUART_Struct_Typedef * UART)
{
if(UART->UART ==USART1)
RCC->APB2ENR |= RCC_APB2ENR_USART1EN;
else if(UART->UART ==USART2)
RCC->APB1ENR |= RCC_APB1ENR_USART2EN;
else if(UART->UART ==USART3)
RCC->APB1ENR |= RCC_APB1ENR_USART3EN;
RCC->APB2ENR |= RCC_APB2ENR_USART1EN; // Validation horloge USART1
USART1->CR1 |= USART_CR1_UE; // Activer l'USART
USART1->CR1 &= ~USART_CR1_M; // Choisir la taille 8bits de donnée
USART1->CR2 |= USART_CR2_STOP; // 1 seul bit de stop
//USART1->BRR |= 468 << 4; // Fixe le baud rate à 9600bps partie entière
//USART1->BRR |= 75; // Fixe le baud rate à 9600bps partie fractionnaire
UART->UART->BRR = 72000000/(UART->baudrate);
USART1->CR1 |= USART_CR1_TE; // Autoriser la transmission
USART1->CR1 |= USART_CR1_RE; // Activer la réception
USART1->CR1 |= USART_CR1_TCIE; // Activer l'interruption de transmission
USART1->CR1 |= USART_CR1_RXNEIE; // Activer l'interruption de réception
}
void UART_send(char data)
{
while(!(USART1->SR & USART_SR_TXE)){} //Attendre l'autorisation de transmission
USART1->DR |= data;
while(!(USART1->SR & USART_SR_TC)){} //Attendre la fin de transmission
}
char UART_read(char data, MyUART_Struct_Typedef * UART)
{
if(UART->UART == USART1)
return received_data1;
else if (UART->UART == USART2)
return received_data2;
else if (UART->UART == USART3)
return received_data3;
else
return 0;
}
void USART1_IRQHandler(void)
{
if (USART1->SR & USART_SR_RXNE) // si une donnée a été reçue
{
received_data1 = USART1->DR; // lire la donnée reçue
}
if (USART1->SR & USART_SR_TC) // si la transmission est terminée
{
USART1->SR &= ~USART_SR_TC; // effacer le bit de transmission terminée
}
}
void USART2_IRQHandler(void)
{
if (USART2->SR & USART_SR_RXNE) // si une donnée a été reçue
{
received_data2 = USART2->DR; // lire la donnée reçue
}
if (USART2->SR & USART_SR_TC) // si la transmission est terminée
{
USART2->SR &= ~USART_SR_TC; // effacer le bit de transmission terminée
}
}
void USART3_IRQHandler(void)
{
if (USART3->SR & USART_SR_RXNE) // si une donnée a été reçue
{
received_data3 = USART3->DR; // lire la donnée reçue
}
if (USART3->SR & USART_SR_TC) // si la transmission est terminée
{
USART3->SR &= ~USART_SR_TC; // effacer le bit de transmission terminée
}
}
void UART_interruption (MyUART_Struct_Typedef * UART)
{
UART->UART->CR1 |= USART_CR1_RXNEIE;
NVIC->ISER[0] |= 1<<USART1_IRQn;
}

267
GPIO_Test/GPIO_Test.uvoptx
Datei anzeigen

@ -125,7 +125,7 @@
<SetRegEntry>
<Number>0</Number>
<Key>DLGDARM</Key>
<Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=297,604,718,1031,0)(121=-1,-1,-1,-1,0)(122=546,289,967,716,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=997,343,1591,1094,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(234=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)</Name>
<Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=297,604,718,1031,0)(121=-1,-1,-1,-1,0)(122=546,289,967,716,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=846,135,1440,886,0)(131=846,343,1440,1094,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-923,465,-475,879,0)(161=992,268,1440,682,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(234=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
@ -143,14 +143,223 @@
<Name>-U -O206 -S8 -C0 -P00 -N00("") -D00(00000000) -L00(0) -TO65554 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103RB$Flash\STM32F10x_128.FLM)</Name>
</SetRegEntry>
</TargetDriverDllRegistry>
<Breakpoint/>
<Breakpoint>
<Bp>
<Number>0</Number>
<Type>0</Type>
<LineNumber>351</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>54</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename>C:\Users\cedri\OneDrive\INSA\S6\Microcontrôleur\Projet\Voilier\GPIO_Test\RTE\Device\STM32F103RB\system_stm32f10x.c</Filename>
<ExecCommand></ExecCommand>
<Expression>\\GPIO_Test\RTE/Device/STM32F103RB/system_stm32f10x.c\351</Expression>
</Bp>
<Bp>
<Number>1</Number>
<Type>0</Type>
<LineNumber>0</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>18</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename></Filename>
<ExecCommand></ExecCommand>
<Expression>0x00000012</Expression>
</Bp>
<Bp>
<Number>2</Number>
<Type>0</Type>
<LineNumber>69</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>134218622</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename>C:\Users\cedri\OneDrive\INSA\S6\Microcontrôleur\Projet\Voilier\Drivers\Sources\Driver_UART.c</Filename>
<ExecCommand></ExecCommand>
<Expression>\\GPIO_Test\../Drivers/Sources/Driver_UART.c\69</Expression>
</Bp>
<Bp>
<Number>3</Number>
<Type>0</Type>
<LineNumber>56</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>134218578</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename>C:\Users\cedri\OneDrive\INSA\S6\Microcontrôleur\Projet\Voilier\Drivers\Sources\Driver_UART.c</Filename>
<ExecCommand></ExecCommand>
<Expression>\\GPIO_Test\../Drivers/Sources/Driver_UART.c\56</Expression>
</Bp>
<Bp>
<Number>4</Number>
<Type>0</Type>
<LineNumber>0</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>20</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename></Filename>
<ExecCommand></ExecCommand>
<Expression>0x00000014</Expression>
</Bp>
<Bp>
<Number>5</Number>
<Type>0</Type>
<LineNumber>338</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>40</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename>C:\Users\cedri\OneDrive\INSA\S6\Microcontrôleur\Projet\Voilier\GPIO_Test\RTE\Device\STM32F103RB\system_stm32f10x.c</Filename>
<ExecCommand></ExecCommand>
<Expression>\\GPIO_Test\RTE/Device/STM32F103RB/system_stm32f10x.c\338</Expression>
</Bp>
<Bp>
<Number>6</Number>
<Type>0</Type>
<LineNumber>22</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>114</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename>C:\Users\cedri\OneDrive\INSA\S6\Microcontrôleur\Projet\Voilier\Drivers\Sources\Driver_UART.c</Filename>
<ExecCommand></ExecCommand>
<Expression>\\GPIO_Test\../Drivers/Sources/Driver_UART.c\22</Expression>
</Bp>
<Bp>
<Number>7</Number>
<Type>0</Type>
<LineNumber>134</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>134218094</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename>RTE/Device/STM32F103RB/startup_stm32f10x_md.s</Filename>
<ExecCommand></ExecCommand>
<Expression>\\GPIO_Test\RTE/Device/STM32F103RB/startup_stm32f10x_md.s\134</Expression>
</Bp>
<Bp>
<Number>8</Number>
<Type>0</Type>
<LineNumber>33</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>0</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>0</BreakIfRCount>
<Filename>..\Drivers\Sources\Driver_UART.c</Filename>
<ExecCommand></ExecCommand>
<Expression></Expression>
</Bp>
<Bp>
<Number>9</Number>
<Type>0</Type>
<LineNumber>39</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>0</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>0</BreakIfRCount>
<Filename>..\Drivers\Sources\Driver_UART.c</Filename>
<ExecCommand></ExecCommand>
<Expression></Expression>
</Bp>
<Bp>
<Number>10</Number>
<Type>0</Type>
<LineNumber>85</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>0</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>0</BreakIfRCount>
<Filename>..\Drivers\Sources\Driver_UART.c</Filename>
<ExecCommand></ExecCommand>
<Expression></Expression>
</Bp>
<Bp>
<Number>11</Number>
<Type>0</Type>
<LineNumber>92</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>0</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>0</BreakIfRCount>
<Filename>..\Drivers\Sources\Driver_UART.c</Filename>
<ExecCommand></ExecCommand>
<Expression></Expression>
</Bp>
<Bp>
<Number>12</Number>
<Type>0</Type>
<LineNumber>59</LineNumber>
<EnabledFlag>0</EnabledFlag>
<Address>0</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>0</BreakIfRCount>
<Filename>.\Sources\Main.c</Filename>
<ExecCommand></ExecCommand>
<Expression></Expression>
</Bp>
</Breakpoint>
<Tracepoint>
<THDelay>0</THDelay>
</Tracepoint>
<DebugFlag>
<trace>0</trace>
<periodic>1</periodic>
<aLwin>1</aLwin>
<aLwin>0</aLwin>
<aCover>0</aCover>
<aSer1>0</aSer1>
<aSer2>0</aSer2>
@ -158,13 +367,13 @@
<viewmode>1</viewmode>
<vrSel>0</vrSel>
<aSym>0</aSym>
<aTbox>1</aTbox>
<aTbox>0</aTbox>
<AscS1>0</AscS1>
<AscS2>0</AscS2>
<AscS3>0</AscS3>
<aSer3>0</aSer3>
<eProf>0</eProf>
<aLa>1</aLa>
<aLa>0</aLa>
<aPa1>0</aPa1>
<AscS4>0</AscS4>
<aSer4>0</aSer4>
@ -193,12 +402,6 @@
<SecondString>FF000000000000000000000000000000E0FFEF400100000000000000000000000000000028504F5254412026203078303030303030323029203E3E2035000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000100000001000000000000000000F03F1700000000000000000000000000000000000000DA040008</SecondString>
</Wi>
</LogicAnalyzers>
<SystemViewers>
<Entry>
<Name>System Viewer\GPIOA</Name>
<WinId>35905</WinId>
</Entry>
</SystemViewers>
<DebugDescription>
<Enable>1</Enable>
<EnableFlashSeq>0</EnableFlashSeq>
@ -422,48 +625,12 @@
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>3</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Drivers\Include\Driver_GPIO.h</PathWithFileName>
<FilenameWithoutPath>Driver_GPIO.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>4</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Drivers\Include\Driver_Timer.h</PathWithFileName>
<FilenameWithoutPath>Driver_Timer.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>5</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Drivers\Include\Driver_ADC.h</PathWithFileName>
<FilenameWithoutPath>Driver_ADC.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>6</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Drivers\Sources\Driver_ADC.c</PathWithFileName>
<FilenameWithoutPath>Driver_ADC.c</FilenameWithoutPath>
<PathWithFileName>..\Drivers\Sources\Driver_UART.c</PathWithFileName>
<FilenameWithoutPath>Driver_UART.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -477,7 +644,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>7</FileNumber>
<FileNumber>4</FileNumber>
<FileType>1</FileType>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>

68
GPIO_Test/GPIO_Test.uvprojx
Datei anzeigen

@ -10,13 +10,13 @@
<TargetName>Simu</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<pCCUsed>5060960::V5.06 update 7 (build 960)::.\ARMCC</pCCUsed>
<uAC6>0</uAC6>
<pCCUsed>6190000::V6.19::ARMCLANG</pCCUsed>
<uAC6>1</uAC6>
<TargetOption>
<TargetCommonOption>
<Device>STM32F103RB</Device>
<Vendor>STMicroelectronics</Vendor>
<PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
<PackID>Keil.STM32F1xx_DFP.2.4.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IRAM(0x20000000,0x00005000) IROM(0x08000000,0x00020000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
@ -186,6 +186,7 @@
<RvdsVP>0</RvdsVP>
<RvdsMve>0</RvdsMve>
<RvdsCdeCp>0</RvdsCdeCp>
<nBranchProt>0</nBranchProt>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
@ -313,7 +314,7 @@
</ArmAdsMisc>
<Cads>
<interw>1</interw>
<Optim>1</Optim>
<Optim>2</Optim>
<oTime>0</oTime>
<SplitLS>0</SplitLS>
<OneElfS>1</OneElfS>
@ -322,14 +323,14 @@
<PlainCh>0</PlainCh>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<wLevel>2</wLevel>
<wLevel>3</wLevel>
<uThumb>0</uThumb>
<uSurpInc>0</uSurpInc>
<uC99>0</uC99>
<uGnu>0</uGnu>
<useXO>0</useXO>
<v6Lang>3</v6Lang>
<v6LangP>3</v6LangP>
<v6Lang>1</v6Lang>
<v6LangP>5</v6LangP>
<vShortEn>1</vShortEn>
<vShortWch>1</vShortWch>
<v6Lto>0</v6Lto>
@ -394,24 +395,9 @@
<FilePath>..\Drivers\Sources\Driver_Timer.c</FilePath>
</File>
<File>
<FileName>Driver_GPIO.h</FileName>
<FileType>5</FileType>
<FilePath>..\Drivers\Include\Driver_GPIO.h</FilePath>
</File>
<File>
<FileName>Driver_Timer.h</FileName>
<FileType>5</FileType>
<FilePath>..\Drivers\Include\Driver_Timer.h</FilePath>
</File>
<File>
<FileName>Driver_ADC.h</FileName>
<FileType>5</FileType>
<FilePath>..\Drivers\Include\Driver_ADC.h</FilePath>
</File>
<File>
<FileName>Driver_ADC.c</FileName>
<FileName>Driver_UART.c</FileName>
<FileType>1</FileType>
<FilePath>..\Drivers\Sources\Driver_ADC.c</FilePath>
<FilePath>..\Drivers\Sources\Driver_UART.c</FilePath>
</File>
</Files>
</Group>
@ -443,7 +429,7 @@
<TargetCommonOption>
<Device>STM32F103RB</Device>
<Vendor>STMicroelectronics</Vendor>
<PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
<PackID>Keil.STM32F1xx_DFP.2.4.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IRAM(0x20000000,0x00005000) IROM(0x08000000,0x00020000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
@ -613,6 +599,7 @@
<RvdsVP>0</RvdsVP>
<RvdsMve>0</RvdsMve>
<RvdsCdeCp>0</RvdsCdeCp>
<nBranchProt>0</nBranchProt>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
@ -821,24 +808,9 @@
<FilePath>..\Drivers\Sources\Driver_Timer.c</FilePath>
</File>
<File>
<FileName>Driver_GPIO.h</FileName>
<FileType>5</FileType>
<FilePath>..\Drivers\Include\Driver_GPIO.h</FilePath>
</File>
<File>
<FileName>Driver_Timer.h</FileName>
<FileType>5</FileType>
<FilePath>..\Drivers\Include\Driver_Timer.h</FilePath>
</File>
<File>
<FileName>Driver_ADC.h</FileName>
<FileType>5</FileType>
<FilePath>..\Drivers\Include\Driver_ADC.h</FilePath>
</File>
<File>
<FileName>Driver_ADC.c</FileName>
<FileName>Driver_UART.c</FileName>
<FileType>1</FileType>
<FilePath>..\Drivers\Sources\Driver_ADC.c</FilePath>
<FilePath>..\Drivers\Sources\Driver_UART.c</FilePath>
</File>
</Files>
</Group>
@ -865,15 +837,15 @@
<RTE>
<apis/>
<components>
<component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.4.0" condition="ARMv6_7_8-M Device">
<package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.7.0"/>
<component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.6.0" condition="ARMv6_7_8-M Device">
<package name="CMSIS" schemaVersion="1.7.7" url="http://www.keil.com/pack/" vendor="ARM" version="5.9.0"/>
<targetInfos>
<targetInfo name="Simu"/>
<targetInfo name="cible"/>
</targetInfos>
</component>
<component Cclass="Device" Cgroup="Startup" Cvendor="Keil" Cversion="1.0.0" condition="STM32F1xx CMSIS">
<package name="STM32F1xx_DFP" schemaVersion="1.4.0" url="http://www.keil.com/pack/" vendor="Keil" version="2.3.0"/>
<package name="STM32F1xx_DFP" schemaVersion="1.7.2" url="http://www.keil.com/pack/" vendor="Keil" version="2.4.0"/>
<targetInfos>
<targetInfo name="Simu"/>
<targetInfo name="cible"/>
@ -884,7 +856,7 @@
<file attr="config" category="header" name="RTE_Driver\Config\RTE_Device.h" version="1.1.2">
<instance index="0">RTE\Device\STM32F103RB\RTE_Device.h</instance>
<component Cclass="Device" Cgroup="Startup" Cvendor="Keil" Cversion="1.0.0" condition="STM32F1xx CMSIS"/>
<package name="STM32F1xx_DFP" schemaVersion="1.4.0" url="http://www.keil.com/pack/" vendor="Keil" version="2.3.0"/>
<package name="STM32F1xx_DFP" schemaVersion="1.7.2" url="http://www.keil.com/pack/" vendor="Keil" version="2.4.0"/>
<targetInfos>
<targetInfo name="Simu"/>
<targetInfo name="cible"/>
@ -893,7 +865,7 @@
<file attr="config" category="source" condition="STM32F1xx MD ARMCC" name="Device\Source\ARM\startup_stm32f10x_md.s" version="1.0.0">
<instance index="0">RTE\Device\STM32F103RB\startup_stm32f10x_md.s</instance>
<component Cclass="Device" Cgroup="Startup" Cvendor="Keil" Cversion="1.0.0" condition="STM32F1xx CMSIS"/>
<package name="STM32F1xx_DFP" schemaVersion="1.4.0" url="http://www.keil.com/pack/" vendor="Keil" version="2.3.0"/>
<package name="STM32F1xx_DFP" schemaVersion="1.7.2" url="http://www.keil.com/pack/" vendor="Keil" version="2.4.0"/>
<targetInfos>
<targetInfo name="Simu"/>
<targetInfo name="cible"/>
@ -902,7 +874,7 @@
<file attr="config" category="source" name="Device\Source\system_stm32f10x.c" version="1.0.0">
<instance index="0">RTE\Device\STM32F103RB\system_stm32f10x.c</instance>
<component Cclass="Device" Cgroup="Startup" Cvendor="Keil" Cversion="1.0.0" condition="STM32F1xx CMSIS"/>
<package name="STM32F1xx_DFP" schemaVersion="1.4.0" url="http://www.keil.com/pack/" vendor="Keil" version="2.3.0"/>
<package name="STM32F1xx_DFP" schemaVersion="1.7.2" url="http://www.keil.com/pack/" vendor="Keil" version="2.4.0"/>
<targetInfos>
<targetInfo name="Simu"/>
<targetInfo name="cible"/>

1828
GPIO_Test/RTE/Device/STM32F103RB/RTE_Device.h.base@1.1.2 Normale Datei
Datei anzeigen

Datei-Diff unterdrückt, da er zu groß ist Diff laden

308
GPIO_Test/RTE/Device/STM32F103RB/startup_stm32f10x_md.s.update@1.0.1 Normale Datei
Datei anzeigen

@ -0,0 +1,308 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md.s
;* Author : MCD Application Team
;* Version : V3.5.1
;* Date : 08-September-2021
;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure the clock system
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Copyright (c) 2011 STMicroelectronics.
;* All rights reserved.
;*
;* This software is licensed under terms that can be found in the LICENSE file
;* in the root directory of this software component.
;* If no LICENSE file comes with this software, it is provided AS-IS.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1_2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT USBWakeUp_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_2_IRQHandler
USB_HP_CAN1_TX_IRQHandler
USB_LP_CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTCAlarm_IRQHandler
USBWakeUp_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END

1092
GPIO_Test/RTE/Device/STM32F103RB/system_stm32f10x.c.update@1.0.1 Normale Datei
Datei anzeigen

Datei-Diff unterdrückt, da er zu groß ist Diff laden

64
GPIO_Test/Sources/Main.c
Datei anzeigen

@ -1,29 +1,83 @@
#include "Driver_GPIO.h"
#include "Driver_Timer.h"
#include "Driver_UART.h"
char data[] = "Hello World";
int i = 0;
int len = sizeof(data) - 1; // -1 pour ne pas envoyer le caractère nul
int main (void){
//Déclaration d'une LED et d'un BP par structure GPIO
MyGPIO_Struct_TypeDef LED;
MyGPIO_Struct_TypeDef BP;
//Déclaration d'un Timer 500 ms
MyTimer_Struct_TypeDef TIM500ms;
//Déclaration de l'UART
MyUART_Struct_Typedef * UART;
UART->UART=USART1;
UART->baudrate=9600;
//Config LED PA5
LED.GPIO_Conf = Out_Ppull;
LED.GPIO_Pin = 5;
LED.GPIO = GPIOA;
MyGPIO_Init (&LED) ;
//Config BP PC13
BP.GPIO_Conf = In_Floating;
BP.GPIO_Pin = 13;
BP.GPIO = GPIOC;
//Init BP & LED
MyGPIO_Init (&LED);
MyGPIO_Init (&BP);
//Init Timer 2 et Test
TIM500ms.Timer = TIM2;
TIM500ms.PSC = 0xD2F0; // =0.5ms(calculé à partir de la fréquence du micro)
TIM500ms.ARR = 1000;
TIM500ms.PSC = 7200; // =0.5ms(calculé à partir de la fréquence du micro)
TIM500ms.ARR = 5000;
MyTimer_Base_Init(&TIM500ms);
/*
TIM2->DIER |= 1<< 0 ; //INTERRUPTION PERIPH
//TIM2->DIER |= TIM_DIER_UIE ;
NVIC->ISER[0] |= 1<<TIM2_IRQn ; //INTERRUPTION COEUR
NVIC->IP[TIM2_IRQn] = 2<< 4 ;
*/
MyTimer_Base_Start(TIM500ms.Timer);
//Boucle infinie de la réponse de la LED à l'état BP
MyTimer_PWM(&TIM500ms, 50);
UART_init(UART);
//NVIC_EnableIRQ(USART1_IRQn);// Activer les interruptions
// Envoyer les données
for (i = 0; i < len; i++) {
UART_send(data[i]);
}
UART_read(data[i], UART);
while(1){
// if (MyGPIO_Read(BP.GPIO,BP.GPIO_Pin)==0){
// MyGPIO_Set(LED.GPIO,LED.GPIO_Pin);
// }else{
// MyGPIO_Reset(LED.GPIO,LED.GPIO_Pin);
// }
}
}
/*
void TIM2_IRQHandler (void)
{
MyGPIO_Toggle(GPIOA,5);
TIM2->SR &= ~(1<<0);
}
*/