1828 lines
62 KiB
C
1828 lines
62 KiB
C
/* -----------------------------------------------------------------------------
|
|
* Copyright (c) 2013-2016 ARM Ltd.
|
|
*
|
|
* This software is provided 'as-is', without any express or implied warranty.
|
|
* In no event will the authors be held liable for any damages arising from
|
|
* the use of this software. Permission is granted to anyone to use this
|
|
* software for any purpose, including commercial applications, and to alter
|
|
* it and redistribute it freely, subject to the following restrictions:
|
|
*
|
|
* 1. The origin of this software must not be misrepresented; you must not
|
|
* claim that you wrote the original software. If you use this software in
|
|
* a product, an acknowledgment in the product documentation would be
|
|
* appreciated but is not required.
|
|
*
|
|
* 2. Altered source versions must be plainly marked as such, and must not be
|
|
* misrepresented as being the original software.
|
|
*
|
|
* 3. This notice may not be removed or altered from any source distribution.
|
|
*
|
|
* $Date: 09. September 2016
|
|
* $Revision: V1.1.2
|
|
*
|
|
* Project: RTE Device Configuration for STMicroelectronics STM32F1xx
|
|
*
|
|
* -------------------------------------------------------------------------- */
|
|
|
|
//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
|
|
|
|
#ifndef __RTE_DEVICE_H
|
|
#define __RTE_DEVICE_H
|
|
|
|
|
|
#define GPIO_PORT(num) \
|
|
((num == 0) ? GPIOA : \
|
|
(num == 1) ? GPIOB : \
|
|
(num == 2) ? GPIOC : \
|
|
(num == 3) ? GPIOD : \
|
|
(num == 4) ? GPIOE : \
|
|
(num == 5) ? GPIOF : \
|
|
(num == 6) ? GPIOG : \
|
|
NULL)
|
|
|
|
|
|
// <h> Clock Configuration
|
|
// <o> High-speed Internal Clock <1-999999999>
|
|
#define RTE_HSI 8000000
|
|
// <o> High-speed External Clock <1-999999999>
|
|
#define RTE_HSE 25000000
|
|
// <o> System Clock <1-999999999>
|
|
#define RTE_SYSCLK 72000000
|
|
// <o> HCLK Clock <1-999999999>
|
|
#define RTE_HCLK 72000000
|
|
// <o> APB1 Clock <1-999999999>
|
|
#define RTE_PCLK1 36000000
|
|
// <o> APB2 Clock <1-999999999>
|
|
#define RTE_PCLK2 72000000
|
|
// <o> ADC Clock <1-999999999>
|
|
#define RTE_ADCCLK 36000000
|
|
// USB Clock
|
|
#define RTE_USBCLK 48000000
|
|
// </h>
|
|
|
|
|
|
// <e> USART1 (Universal synchronous asynchronous receiver transmitter)
|
|
// <i> Configuration settings for Driver_USART1 in component ::CMSIS Driver:USART
|
|
#define RTE_USART1 0
|
|
|
|
// <o> USART1_TX Pin <0=>Not Used <1=>PA9
|
|
#define RTE_USART1_TX_PORT_ID_DEF 0
|
|
#if (RTE_USART1_TX_PORT_ID_DEF == 0)
|
|
#define RTE_USART1_TX_DEF 0
|
|
#elif (RTE_USART1_TX_PORT_ID_DEF == 1)
|
|
#define RTE_USART1_TX_DEF 1
|
|
#define RTE_USART1_TX_PORT_DEF GPIOA
|
|
#define RTE_USART1_TX_BIT_DEF 9
|
|
#else
|
|
#error "Invalid USART1_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART1_RX Pin <0=>Not Used <1=>PA10
|
|
#define RTE_USART1_RX_PORT_ID_DEF 0
|
|
#if (RTE_USART1_RX_PORT_ID_DEF == 0)
|
|
#define RTE_USART1_RX_DEF 0
|
|
#elif (RTE_USART1_RX_PORT_ID_DEF == 1)
|
|
#define RTE_USART1_RX_DEF 1
|
|
#define RTE_USART1_RX_PORT_DEF GPIOA
|
|
#define RTE_USART1_RX_BIT_DEF 10
|
|
#else
|
|
#error "Invalid USART1_RX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART1_CK Pin <0=>Not Used <1=>PA8
|
|
#define RTE_USART1_CK_PORT_ID_DEF 0
|
|
#if (RTE_USART1_CK_PORT_ID_DEF == 0)
|
|
#define RTE_USART1_CK 0
|
|
#elif (RTE_USART1_CK_PORT_ID_DEF == 1)
|
|
#define RTE_USART1_CK 1
|
|
#define RTE_USART1_CK_PORT_DEF GPIOA
|
|
#define RTE_USART1_CK_BIT_DEF 8
|
|
#else
|
|
#error "Invalid USART1_CK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART1_CTS Pin <0=>Not Used <1=>PA11
|
|
#define RTE_USART1_CTS_PORT_ID_DEF 0
|
|
#if (RTE_USART1_CTS_PORT_ID_DEF == 0)
|
|
#define RTE_USART1_CTS 0
|
|
#elif (RTE_USART1_CTS_PORT_ID_DEF == 1)
|
|
#define RTE_USART1_CTS 1
|
|
#define RTE_USART1_CTS_PORT_DEF GPIOA
|
|
#define RTE_USART1_CTS_BIT_DEF 11
|
|
#else
|
|
#error "Invalid USART1_CTS Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART1_RTS Pin <0=>Not Used <1=>PA12
|
|
#define RTE_USART1_RTS_PORT_ID_DEF 0
|
|
#if (RTE_USART1_RTS_PORT_ID_DEF == 0)
|
|
#define RTE_USART1_RTS 0
|
|
#elif (RTE_USART1_RTS_PORT_ID_DEF == 1)
|
|
#define RTE_USART1_RTS 1
|
|
#define RTE_USART1_RTS_PORT_DEF GPIOA
|
|
#define RTE_USART1_RTS_BIT_DEF 12
|
|
#else
|
|
#error "Invalid USART1_RTS Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> USART1 Pin Remap
|
|
// <i> Enable USART1 Pin Remapping
|
|
#define RTE_USART1_REMAP_FULL 0
|
|
|
|
// <o> USART1_TX Pin <0=>Not Used <1=>PB6
|
|
#define RTE_USART1_TX_PORT_ID_FULL 0
|
|
#if (RTE_USART1_TX_PORT_ID_FULL == 0)
|
|
#define RTE_USART1_TX_FULL 0
|
|
#elif (RTE_USART1_TX_PORT_ID_FULL == 1)
|
|
#define RTE_USART1_TX_FULL 1
|
|
#define RTE_USART1_TX_PORT_FULL GPIOB
|
|
#define RTE_USART1_TX_BIT_FULL 6
|
|
#else
|
|
#error "Invalid USART1_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART1_RX Pin <0=>Not Used <1=>PB7
|
|
#define RTE_USART1_RX_PORT_ID_FULL 0
|
|
#if (RTE_USART1_RX_PORT_ID_FULL == 0)
|
|
#define RTE_USART1_RX_FULL 0
|
|
#elif (RTE_USART1_RX_PORT_ID_FULL == 1)
|
|
#define RTE_USART1_RX_FULL 1
|
|
#define RTE_USART1_RX_PORT_FULL GPIOB
|
|
#define RTE_USART1_RX_BIT_FULL 7
|
|
#else
|
|
#error "Invalid USART1_RX Pin Configuration!"
|
|
#endif
|
|
// </e>
|
|
|
|
#if (RTE_USART1_REMAP_FULL)
|
|
#define RTE_USART1_AF_REMAP AFIO_USART1_REMAP
|
|
#define RTE_USART1_TX RTE_USART1_TX_FULL
|
|
#define RTE_USART1_TX_PORT RTE_USART1_TX_PORT_FULL
|
|
#define RTE_USART1_TX_BIT RTE_USART1_TX_BIT_FULL
|
|
#define RTE_USART1_RX RTE_USART1_RX_FULL
|
|
#define RTE_USART1_RX_PORT RTE_USART1_RX_PORT_FULL
|
|
#define RTE_USART1_RX_BIT RTE_USART1_RX_BIT_FULL
|
|
#define RTE_USART1_CK_PORT RTE_USART1_CK_PORT_DEF
|
|
#define RTE_USART1_CK_BIT RTE_USART1_CK_BIT_DEF
|
|
#define RTE_USART1_CTS_PORT RTE_USART1_CTS_PORT_DEF
|
|
#define RTE_USART1_CTS_BIT RTE_USART1_CTS_BIT_DEF
|
|
#define RTE_USART1_RTS_PORT RTE_USART1_RTS_PORT_DEF
|
|
#define RTE_USART1_RTS_BIT RTE_USART1_RTS_BIT_DEF
|
|
#else
|
|
#define RTE_USART1_AF_REMAP AFIO_USART1_NO_REMAP
|
|
#define RTE_USART1_TX RTE_USART1_TX_DEF
|
|
#define RTE_USART1_TX_PORT RTE_USART1_TX_PORT_DEF
|
|
#define RTE_USART1_TX_BIT RTE_USART1_TX_BIT_DEF
|
|
#define RTE_USART1_RX RTE_USART1_RX_DEF
|
|
#define RTE_USART1_RX_PORT RTE_USART1_RX_PORT_DEF
|
|
#define RTE_USART1_RX_BIT RTE_USART1_RX_BIT_DEF
|
|
#define RTE_USART1_CK_PORT RTE_USART1_CK_PORT_DEF
|
|
#define RTE_USART1_CK_BIT RTE_USART1_CK_BIT_DEF
|
|
#define RTE_USART1_CTS_PORT RTE_USART1_CTS_PORT_DEF
|
|
#define RTE_USART1_CTS_BIT RTE_USART1_CTS_BIT_DEF
|
|
#define RTE_USART1_RTS_PORT RTE_USART1_RTS_PORT_DEF
|
|
#define RTE_USART1_RTS_BIT RTE_USART1_RTS_BIT_DEF
|
|
#endif
|
|
|
|
// <e> DMA Rx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <5=>5
|
|
// <i> Selects DMA Channel (only Channel 5 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very high
|
|
// <i> Set DMA Channel priority
|
|
// </e>
|
|
#define RTE_USART1_RX_DMA 0
|
|
#define RTE_USART1_RX_DMA_NUMBER 1
|
|
#define RTE_USART1_RX_DMA_CHANNEL 5
|
|
#define RTE_USART1_RX_DMA_PRIORITY 0
|
|
// <e> DMA Tx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <4=>4
|
|
// <i> Selects DMA Channel (only Channel 4 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very high
|
|
// <i> Set DMA Channel priority
|
|
// </e>
|
|
#define RTE_USART1_TX_DMA 0
|
|
#define RTE_USART1_TX_DMA_NUMBER 1
|
|
#define RTE_USART1_TX_DMA_CHANNEL 4
|
|
#define RTE_USART1_TX_DMA_PRIORITY 0
|
|
// </e>
|
|
|
|
|
|
// <e> USART2 (Universal synchronous asynchronous receiver transmitter)
|
|
// <i> Configuration settings for Driver_USART2 in component ::CMSIS Driver:USART
|
|
#define RTE_USART2 0
|
|
|
|
// <o> USART2_TX Pin <0=>Not Used <1=>PA2
|
|
#define RTE_USART2_TX_PORT_ID_DEF 0
|
|
#if (RTE_USART2_TX_PORT_ID_DEF == 0)
|
|
#define RTE_USART2_TX_DEF 0
|
|
#elif (RTE_USART2_TX_PORT_ID_DEF == 1)
|
|
#define RTE_USART2_TX_DEF 1
|
|
#define RTE_USART2_TX_PORT_DEF GPIOA
|
|
#define RTE_USART2_TX_BIT_DEF 2
|
|
#else
|
|
#error "Invalid USART2_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART2_RX Pin <0=>Not Used <1=>PA3
|
|
#define RTE_USART2_RX_PORT_ID_DEF 0
|
|
#if (RTE_USART2_RX_PORT_ID_DEF == 0)
|
|
#define RTE_USART2_RX_DEF 0
|
|
#elif (RTE_USART2_RX_PORT_ID_DEF == 1)
|
|
#define RTE_USART2_RX_DEF 1
|
|
#define RTE_USART2_RX_PORT_DEF GPIOA
|
|
#define RTE_USART2_RX_BIT_DEF 3
|
|
#else
|
|
#error "Invalid USART2_RX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART2_CK Pin <0=>Not Used <1=>PA4
|
|
#define RTE_USART2_CK_PORT_ID_DEF 0
|
|
#if (RTE_USART2_CK_PORT_ID_DEF == 0)
|
|
#define RTE_USART2_CK_DEF 0
|
|
#elif (RTE_USART2_CK_PORT_ID_DEF == 1)
|
|
#define RTE_USART2_CK_DEF 1
|
|
#define RTE_USART2_CK_PORT_DEF GPIOA
|
|
#define RTE_USART2_CK_BIT_DEF 4
|
|
#else
|
|
#error "Invalid USART2_CK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART2_CTS Pin <0=>Not Used <1=>PA0
|
|
#define RTE_USART2_CTS_PORT_ID_DEF 0
|
|
#if (RTE_USART2_CTS_PORT_ID_DEF == 0)
|
|
#define RTE_USART2_CTS_DEF 0
|
|
#elif (RTE_USART2_CTS_PORT_ID_DEF == 1)
|
|
#define RTE_USART2_CTS_DEF 1
|
|
#define RTE_USART2_CTS_PORT_DEF GPIOA
|
|
#define RTE_USART2_CTS_BIT_DEF 0
|
|
#else
|
|
#error "Invalid USART2_CTS Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART2_RTS Pin <0=>Not Used <1=>PA1
|
|
#define RTE_USART2_RTS_PORT_ID_DEF 0
|
|
#if (RTE_USART2_RTS_PORT_ID_DEF == 0)
|
|
#define RTE_USART2_RTS_DEF 0
|
|
#elif (RTE_USART2_RTS_PORT_ID_DEF == 1)
|
|
#define RTE_USART2_RTS_DEF 1
|
|
#define RTE_USART2_RTS_PORT_DEF GPIOA
|
|
#define RTE_USART2_RTS_BIT_DEF 1
|
|
#else
|
|
#error "Invalid USART2_RTS Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> USART2 Pin Remap
|
|
// <i> Enable USART2 Pin Remapping
|
|
#define RTE_USART2_REMAP_FULL 0
|
|
|
|
// <o> USART2_TX Pin <0=>Not Used <1=>PD5
|
|
#define RTE_USART2_TX_PORT_ID_FULL 0
|
|
#if (RTE_USART2_TX_PORT_ID_FULL == 0)
|
|
#define RTE_USART2_TX_FULL 0
|
|
#elif (RTE_USART2_TX_PORT_ID_FULL == 1)
|
|
#define RTE_USART2_TX_FULL 1
|
|
#define RTE_USART2_TX_PORT_FULL GPIOD
|
|
#define RTE_USART2_TX_BIT_FULL 5
|
|
#else
|
|
#error "Invalid USART2_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART2_RX Pin <0=>Not Used <1=>PD6
|
|
#define RTE_USART2_RX_PORT_ID_FULL 0
|
|
#if (RTE_USART2_RX_PORT_ID_FULL == 0)
|
|
#define RTE_USART2_RX_FULL 0
|
|
#elif (RTE_USART2_RX_PORT_ID_FULL == 1)
|
|
#define RTE_USART2_RX_FULL 1
|
|
#define RTE_USART2_RX_PORT_FULL GPIOD
|
|
#define RTE_USART2_RX_BIT_FULL 6
|
|
#else
|
|
#error "Invalid USART2_RX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART2_CK Pin <0=>Not Used <1=>PD7
|
|
#define RTE_USART2_CK_PORT_ID_FULL 0
|
|
#if (RTE_USART2_CK_PORT_ID_FULL == 0)
|
|
#define RTE_USART2_CK_FULL 0
|
|
#elif (RTE_USART2_CK_PORT_ID_FULL == 1)
|
|
#define RTE_USART2_CK_FULL 1
|
|
#define RTE_USART2_CK_PORT_FULL GPIOD
|
|
#define RTE_USART2_CK_BIT_FULL 7
|
|
#else
|
|
#error "Invalid USART2_CK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART2_CTS Pin <0=>Not Used <1=>PD3
|
|
#define RTE_USART2_CTS_PORT_ID_FULL 0
|
|
#if (RTE_USART2_CTS_PORT_ID_FULL == 0)
|
|
#define RTE_USART2_CTS_FULL 0
|
|
#elif (RTE_USART2_CTS_PORT_ID_FULL == 1)
|
|
#define RTE_USART2_CTS_FULL 1
|
|
#define RTE_USART2_CTS_PORT_FULL GPIOD
|
|
#define RTE_USART2_CTS_BIT_FULL 3
|
|
#else
|
|
#error "Invalid USART2_CTS Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART2_RTS Pin <0=>Not Used <1=>PD4
|
|
#define RTE_USART2_RTS_PORT_ID_FULL 0
|
|
#if (RTE_USART2_RTS_PORT_ID_FULL == 0)
|
|
#define RTE_USART2_RTS_FULL 0
|
|
#elif (RTE_USART2_RTS_PORT_ID_FULL == 1)
|
|
#define RTE_USART2_RTS_FULL 1
|
|
#define RTE_USART2_RTS_PORT_FULL GPIOD
|
|
#define RTE_USART2_RTS_BIT_FULL 4
|
|
#else
|
|
#error "Invalid USART2_RTS Pin Configuration!"
|
|
#endif
|
|
// </e>
|
|
|
|
#if (RTE_USART2_REMAP_FULL)
|
|
#define RTE_USART2_AF_REMAP AFIO_USART2_REMAP
|
|
#define RTE_USART2_TX RTE_USART2_TX_FULL
|
|
#define RTE_USART2_TX_PORT RTE_USART2_TX_PORT_FULL
|
|
#define RTE_USART2_TX_BIT RTE_USART2_TX_BIT_FULL
|
|
#define RTE_USART2_RX RTE_USART2_RX_FULL
|
|
#define RTE_USART2_RX_PORT RTE_USART2_RX_PORT_FULL
|
|
#define RTE_USART2_RX_BIT RTE_USART2_RX_BIT_FULL
|
|
#define RTE_USART2_CK RTE_USART2_CK_FULL
|
|
#define RTE_USART2_CK_PORT RTE_USART2_CK_PORT_FULL
|
|
#define RTE_USART2_CK_BIT RTE_USART2_CK_BIT_FULL
|
|
#define RTE_USART2_CTS RTE_USART2_CTS_FULL
|
|
#define RTE_USART2_CTS_PORT RTE_USART2_CTS_PORT_FULL
|
|
#define RTE_USART2_CTS_BIT RTE_USART2_CTS_BIT_FULL
|
|
#define RTE_USART2_RTS RTE_USART2_RTS_FULL
|
|
#define RTE_USART2_RTS_PORT RTE_USART2_RTS_PORT_FULL
|
|
#define RTE_USART2_RTS_BIT RTE_USART2_RTS_BIT_FULL
|
|
#else
|
|
#define RTE_USART2_AF_REMAP AFIO_USART2_NO_REMAP
|
|
#define RTE_USART2_TX RTE_USART2_TX_DEF
|
|
#define RTE_USART2_TX_PORT RTE_USART2_TX_PORT_DEF
|
|
#define RTE_USART2_TX_BIT RTE_USART2_TX_BIT_DEF
|
|
#define RTE_USART2_RX RTE_USART2_RX_DEF
|
|
#define RTE_USART2_RX_PORT RTE_USART2_RX_PORT_DEF
|
|
#define RTE_USART2_RX_BIT RTE_USART2_RX_BIT_DEF
|
|
#define RTE_USART2_CK RTE_USART2_CK_DEF
|
|
#define RTE_USART2_CK_PORT RTE_USART2_CK_PORT_DEF
|
|
#define RTE_USART2_CK_BIT RTE_USART2_CK_BIT_DEF
|
|
#define RTE_USART2_CTS RTE_USART2_CTS_DEF
|
|
#define RTE_USART2_CTS_PORT RTE_USART2_CTS_PORT_DEF
|
|
#define RTE_USART2_CTS_BIT RTE_USART2_CTS_BIT_DEF
|
|
#define RTE_USART2_RTS RTE_USART2_RTS_DEF
|
|
#define RTE_USART2_RTS_PORT RTE_USART2_RTS_PORT_DEF
|
|
#define RTE_USART2_RTS_BIT RTE_USART2_RTS_BIT_DEF
|
|
#endif
|
|
|
|
// <e> DMA Rx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <6=>6
|
|
// <i> Selects DMA Channel (only Channel 6 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very high
|
|
// <i> Set DMA Channel priority
|
|
// </e>
|
|
#define RTE_USART2_RX_DMA 0
|
|
#define RTE_USART2_RX_DMA_NUMBER 1
|
|
#define RTE_USART2_RX_DMA_CHANNEL 6
|
|
#define RTE_USART2_RX_DMA_PRIORITY 0
|
|
|
|
// <e> DMA Tx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <7=>7
|
|
// <i> Selects DMA Channel (only Channel 7 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very high
|
|
// <i> Set DMA Channel priority
|
|
// </e>
|
|
#define RTE_USART2_TX_DMA 0
|
|
#define RTE_USART2_TX_DMA_NUMBER 1
|
|
#define RTE_USART2_TX_DMA_CHANNEL 7
|
|
#define RTE_USART2_TX_DMA_PRIORITY 0
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> USART3 (Universal synchronous asynchronous receiver transmitter)
|
|
// <i> Configuration settings for Driver_USART3 in component ::CMSIS Driver:USART
|
|
#define RTE_USART3 0
|
|
|
|
// <o> USART3_TX Pin <0=>Not Used <1=>PB10
|
|
#define RTE_USART3_TX_PORT_ID_DEF 0
|
|
#if (RTE_USART3_TX_PORT_ID_DEF == 0)
|
|
#define RTE_USART3_TX_DEF 0
|
|
#elif (RTE_USART3_TX_PORT_ID_DEF == 1)
|
|
#define RTE_USART3_TX_DEF 1
|
|
#define RTE_USART3_TX_PORT_DEF GPIOB
|
|
#define RTE_USART3_TX_BIT_DEF 10
|
|
#else
|
|
#error "Invalid USART3_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_RX Pin <0=>Not Used <1=>PB11
|
|
#define RTE_USART3_RX_PORT_ID_DEF 0
|
|
#if (RTE_USART3_RX_PORT_ID_DEF == 0)
|
|
#define RTE_USART3_RX_DEF 0
|
|
#elif (RTE_USART3_RX_PORT_ID_DEF == 1)
|
|
#define RTE_USART3_RX_DEF 1
|
|
#define RTE_USART3_RX_PORT_DEF GPIOB
|
|
#define RTE_USART3_RX_BIT_DEF 11
|
|
#else
|
|
#error "Invalid USART3_RX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_CK Pin <0=>Not Used <1=>PB12
|
|
#define RTE_USART3_CK_PORT_ID_DEF 0
|
|
#if (RTE_USART3_CK_PORT_ID_DEF == 0)
|
|
#define RTE_USART3_CK_DEF 0
|
|
#elif (RTE_USART3_CK_PORT_ID_DEF == 1)
|
|
#define RTE_USART3_CK_DEF 1
|
|
#define RTE_USART3_CK_PORT_DEF GPIOB
|
|
#define RTE_USART3_CK_BIT_DEF 12
|
|
#else
|
|
#error "Invalid USART3_CK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_CTS Pin <0=>Not Used <1=>PB13
|
|
#define RTE_USART3_CTS_PORT_ID_DEF 0
|
|
#if (RTE_USART3_CTS_PORT_ID_DEF == 0)
|
|
#define RTE_USART3_CTS_DEF 0
|
|
#elif (RTE_USART3_CTS_PORT_ID_DEF == 1)
|
|
#define RTE_USART3_CTS_DEF 1
|
|
#define RTE_USART3_CTS_PORT_DEF GPIOB
|
|
#define RTE_USART3_CTS_BIT_DEF 13
|
|
#else
|
|
#error "Invalid USART3_CTS Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_RTS Pin <0=>Not Used <1=>PB14
|
|
#define RTE_USART3_RTS_PORT_ID_DEF 0
|
|
#if (RTE_USART3_RTS_PORT_ID_DEF == 0)
|
|
#define RTE_USART3_RTS_DEF 0
|
|
#elif (RTE_USART3_RTS_PORT_ID_DEF == 1)
|
|
#define RTE_USART3_RTS_DEF 1
|
|
#define RTE_USART3_RTS_PORT_DEF GPIOB
|
|
#define RTE_USART3_RTS_BIT_DEF 14
|
|
#else
|
|
#error "Invalid USART3_RTS Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> USART3 Partial Pin Remap
|
|
// <i> Enable USART3 Partial Pin Remapping
|
|
#define RTE_USART3_REMAP_PARTIAL 0
|
|
|
|
// <o> USART3_TX Pin <0=>Not Used <1=>PC10
|
|
#define RTE_USART3_TX_PORT_ID_PARTIAL 0
|
|
#if (RTE_USART3_TX_PORT_ID_PARTIAL == 0)
|
|
#define RTE_USART3_TX_PARTIAL 0
|
|
#elif (RTE_USART3_TX_PORT_ID_PARTIAL == 1)
|
|
#define RTE_USART3_TX_PARTIAL 1
|
|
#define RTE_USART3_TX_PORT_PARTIAL GPIOC
|
|
#define RTE_USART3_TX_BIT_PARTIAL 10
|
|
#else
|
|
#error "Invalid USART3_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_RX Pin <0=>Not Used <1=>PC11
|
|
#define RTE_USART3_RX_PORT_ID_PARTIAL 0
|
|
#if (RTE_USART3_RX_PORT_ID_PARTIAL == 0)
|
|
#define RTE_USART3_RX_PARTIAL 0
|
|
#elif (RTE_USART3_RX_PORT_ID_PARTIAL == 1)
|
|
#define RTE_USART3_RX_PARTIAL 1
|
|
#define RTE_USART3_RX_PORT_PARTIAL GPIOC
|
|
#define RTE_USART3_RX_BIT_PARTIAL 11
|
|
#else
|
|
#error "Invalid USART3_RX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_CK Pin <0=>Not Used <1=>PC12
|
|
#define RTE_USART3_CK_PORT_ID_PARTIAL 0
|
|
#if (RTE_USART3_CK_PORT_ID_PARTIAL == 0)
|
|
#define RTE_USART3_CK_PARTIAL 0
|
|
#elif (RTE_USART3_CK_PORT_ID_PARTIAL == 1)
|
|
#define RTE_USART3_CK_PARTIAL 1
|
|
#define RTE_USART3_CK_PORT_PARTIAL GPIOC
|
|
#define RTE_USART3_CK_BIT_PARTIAL 12
|
|
#else
|
|
#error "Invalid USART3_CK Pin Configuration!"
|
|
#endif
|
|
// </e>
|
|
|
|
// <e> USART3 Full Pin Remap
|
|
// <i> Enable USART3 Full Pin Remapping
|
|
#define RTE_USART3_REMAP_FULL 0
|
|
|
|
// <o> USART3_TX Pin <0=>Not Used <1=>PD8
|
|
#define RTE_USART3_TX_PORT_ID_FULL 0
|
|
#if (RTE_USART3_TX_PORT_ID_FULL == 0)
|
|
#define RTE_USART3_TX_FULL 0
|
|
#elif (RTE_USART3_TX_PORT_ID_FULL == 1)
|
|
#define RTE_USART3_TX_FULL 1
|
|
#define RTE_USART3_TX_PORT_FULL GPIOD
|
|
#define RTE_USART3_TX_BIT_FULL 8
|
|
#else
|
|
#error "Invalid USART3_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_RX Pin <0=>Not Used <1=>PD9
|
|
#define RTE_USART3_RX_PORT_ID_FULL 0
|
|
#if (RTE_USART3_RX_PORT_ID_FULL == 0)
|
|
#define RTE_USART3_RX_FULL 0
|
|
#elif (RTE_USART3_RX_PORT_ID_FULL == 1)
|
|
#define RTE_USART3_RX_FULL 1
|
|
#define RTE_USART3_RX_PORT_FULL GPIOD
|
|
#define RTE_USART3_RX_BIT_FULL 9
|
|
#else
|
|
#error "Invalid USART3_RX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_CK Pin <0=>Not Used <1=>PD10
|
|
#define RTE_USART3_CK_PORT_ID_FULL 0
|
|
#if (RTE_USART3_CK_PORT_ID_FULL == 0)
|
|
#define RTE_USART3_CK_FULL 0
|
|
#elif (RTE_USART3_CK_PORT_ID_FULL == 1)
|
|
#define RTE_USART3_CK_FULL 1
|
|
#define RTE_USART3_CK_PORT_FULL GPIOD
|
|
#define RTE_USART3_CK_BIT_FULL 10
|
|
#else
|
|
#error "Invalid USART3_CK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_CTS Pin <0=>Not Used <1=>PD11
|
|
#define RTE_USART3_CTS_PORT_ID_FULL 0
|
|
#if (RTE_USART3_CTS_PORT_ID_FULL == 0)
|
|
#define RTE_USART3_CTS_FULL 0
|
|
#elif (RTE_USART3_CTS_PORT_ID_FULL == 1)
|
|
#define RTE_USART3_CTS_FULL 1
|
|
#define RTE_USART3_CTS_PORT_FULL GPIOD
|
|
#define RTE_USART3_CTS_BIT_FULL 11
|
|
#else
|
|
#error "Invalid USART3_CTS Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> USART3_RTS Pin <0=>Not Used <1=>PD12
|
|
#define RTE_USART3_RTS_PORT_ID_FULL 0
|
|
#if (RTE_USART3_RTS_PORT_ID_FULL == 0)
|
|
#define RTE_USART3_RTS_FULL 0
|
|
#elif (RTE_USART3_RTS_PORT_ID_FULL == 1)
|
|
#define RTE_USART3_RTS_FULL 1
|
|
#define RTE_USART3_RTS_PORT_FULL GPIOD
|
|
#define RTE_USART3_RTS_BIT_FULL 12
|
|
#else
|
|
#error "Invalid USART3_RTS Pin Configuration!"
|
|
#endif
|
|
// </e>
|
|
|
|
#if ((RTE_USART3_REMAP_PARTIAL == 1) && (RTE_USART3_REMAP_FULL == 1))
|
|
#error "Invalid USART3 Pin Remap Configuration!"
|
|
#endif
|
|
|
|
#if (RTE_USART3_REMAP_FULL)
|
|
#define RTE_USART3_AF_REMAP AFIO_USART3_REMAP_FULL
|
|
#define RTE_USART3_TX RTE_USART3_TX_FULL
|
|
#define RTE_USART3_TX_PORT RTE_USART3_TX_PORT_FULL
|
|
#define RTE_USART3_TX_BIT RTE_USART3_TX_BIT_FULL
|
|
#define RTE_USART3_RX RTE_USART3_RX_FULL
|
|
#define RTE_USART3_RX_PORT RTE_USART3_RX_PORT_FULL
|
|
#define RTE_USART3_RX_BIT RTE_USART3_RX_BIT_FULL
|
|
#define RTE_USART3_CK RTE_USART3_CK_FULL
|
|
#define RTE_USART3_CK_PORT RTE_USART3_CK_PORT_FULL
|
|
#define RTE_USART3_CK_BIT RTE_USART3_CK_BIT_FULL
|
|
#define RTE_USART3_CTS RTE_USART3_CTS_FULL
|
|
#define RTE_USART3_CTS_PORT RTE_USART3_CTS_PORT_FULL
|
|
#define RTE_USART3_CTS_BIT RTE_USART3_CTS_BIT_FULL
|
|
#define RTE_USART3_RTS RTE_USART3_RTS_FULL
|
|
#define RTE_USART3_RTS_PORT RTE_USART3_RTS_PORT_FULL
|
|
#define RTE_USART3_RTS_BIT RTE_USART3_RTS_BIT_FULL
|
|
#elif (RTE_USART3_REMAP_PARTIAL)
|
|
#define RTE_USART3_AF_REMAP AFIO_USART3_REMAP_PARTIAL
|
|
#define RTE_USART3_TX RTE_USART3_TX_PARTIAL
|
|
#define RTE_USART3_TX_PORT RTE_USART3_TX_PORT_PARTIAL
|
|
#define RTE_USART3_TX_BIT RTE_USART3_TX_BIT_PARTIAL
|
|
#define RTE_USART3_RX RTE_USART3_RX_PARTIAL
|
|
#define RTE_USART3_RX_PORT RTE_USART3_RX_PORT_PARTIAL
|
|
#define RTE_USART3_RX_BIT RTE_USART3_RX_BIT_PARTIAL
|
|
#define RTE_USART3_CK RTE_USART3_CK_PARTIAL
|
|
#define RTE_USART3_CK_PORT RTE_USART3_CK_PORT_PARTIAL
|
|
#define RTE_USART3_CK_BIT RTE_USART3_CK_BIT_PARTIAL
|
|
#define RTE_USART3_CTS RTE_USART3_CTS_DEF
|
|
#define RTE_USART3_CTS_PORT RTE_USART3_CTS_PORT_DEF
|
|
#define RTE_USART3_CTS_BIT RTE_USART3_CTS_BIT_DEF
|
|
#define RTE_USART3_RTS RTE_USART3_RTS_DEF
|
|
#define RTE_USART3_RTS_PORT RTE_USART3_RTS_PORT_DEF
|
|
#define RTE_USART3_RTS_BIT RTE_USART3_RTS_BIT_DEF
|
|
#else
|
|
#define RTE_USART3_AF_REMAP AFIO_USART3_NO_REMAP
|
|
#define RTE_USART3_TX RTE_USART3_TX_DEF
|
|
#define RTE_USART3_TX_PORT RTE_USART3_TX_PORT_DEF
|
|
#define RTE_USART3_TX_BIT RTE_USART3_TX_BIT_DEF
|
|
#define RTE_USART3_RX RTE_USART3_RX_DEF
|
|
#define RTE_USART3_RX_PORT RTE_USART3_RX_PORT_DEF
|
|
#define RTE_USART3_RX_BIT RTE_USART3_RX_BIT_DEF
|
|
#define RTE_USART3_CK RTE_USART3_CK_DEF
|
|
#define RTE_USART3_CK_PORT RTE_USART3_CK_PORT_DEF
|
|
#define RTE_USART3_CK_BIT RTE_USART3_CK_BIT_DEF
|
|
#define RTE_USART3_CTS RTE_USART3_CTS_DEF
|
|
#define RTE_USART3_CTS_PORT RTE_USART3_CTS_PORT_DEF
|
|
#define RTE_USART3_CTS_BIT RTE_USART3_CTS_BIT_DEF
|
|
#define RTE_USART3_RTS RTE_USART3_RTS_DEF
|
|
#define RTE_USART3_RTS_PORT RTE_USART3_RTS_PORT_DEF
|
|
#define RTE_USART3_RTS_BIT RTE_USART3_RTS_BIT_DEF
|
|
#endif
|
|
|
|
// <e> DMA Rx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <3=>3
|
|
// <i> Selects DMA Channel (only Channel 3 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very high
|
|
// <i> Sets DMA Channel priority
|
|
// </e>
|
|
#define RTE_USART3_RX_DMA 0
|
|
#define RTE_USART3_RX_DMA_NUMBER 1
|
|
#define RTE_USART3_RX_DMA_CHANNEL 3
|
|
#define RTE_USART3_RX_DMA_PRIORITY 0
|
|
|
|
// <e> DMA Tx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <2=>2
|
|
// <i> Selects DMA Channel (only Channel 2 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very high
|
|
// <i> Sets DMA Channel priority
|
|
// </e>
|
|
#define RTE_USART3_TX_DMA 0
|
|
#define RTE_USART3_TX_DMA_NUMBER 1
|
|
#define RTE_USART3_TX_DMA_CHANNEL 2
|
|
#define RTE_USART3_TX_DMA_PRIORITY 0
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> UART4 (Universal asynchronous receiver transmitter)
|
|
// <i> Configuration settings for Driver_USART4 in component ::CMSIS Driver:USART
|
|
#define RTE_UART4 0
|
|
#define RTE_UART4_AF_REMAP AFIO_UNAVAILABLE_REMAP
|
|
|
|
// <o> UART4_TX Pin <0=>Not Used <1=>PC10
|
|
#define RTE_UART4_TX_ID 0
|
|
#if (RTE_UART4_TX_ID == 0)
|
|
#define RTE_UART4_TX 0
|
|
#elif (RTE_UART4_TX_ID == 1)
|
|
#define RTE_UART4_TX 1
|
|
#define RTE_UART4_TX_PORT GPIOC
|
|
#define RTE_UART4_TX_BIT 10
|
|
#else
|
|
#error "Invalid UART4_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> UART4_RX Pin <0=>Not Used <1=>PC11
|
|
#define RTE_UART4_RX_ID 0
|
|
#if (RTE_UART4_RX_ID == 0)
|
|
#define RTE_UART4_RX 0
|
|
#elif (RTE_UART4_RX_ID == 1)
|
|
#define RTE_UART4_RX 1
|
|
#define RTE_UART4_RX_PORT GPIOC
|
|
#define RTE_UART4_RX_BIT 11
|
|
#else
|
|
#error "Invalid UART4_RX Pin Configuration!"
|
|
#endif
|
|
|
|
|
|
// <e> DMA Rx
|
|
// <o1> Number <2=>2
|
|
// <i> Selects DMA Number (only DMA2 can be used)
|
|
// <o2> Channel <3=>3
|
|
// <i> Selects DMA Channel (only Channel 3 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very high
|
|
// <i> Sets DMA Channel priority
|
|
// </e>
|
|
#define RTE_UART4_RX_DMA 0
|
|
#define RTE_UART4_RX_DMA_NUMBER 2
|
|
#define RTE_UART4_RX_DMA_CHANNEL 3
|
|
#define RTE_UART4_RX_DMA_PRIORITY 0
|
|
|
|
// <e> DMA Tx
|
|
// <o1> Number <2=>2
|
|
// <i> Selects DMA Number (only DMA2 can be used)
|
|
// <o2> Channel <5=>5
|
|
// <i> Selects DMA Channel (only Channel 5 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very high
|
|
// <i> Sets DMA Channel priority
|
|
// </e>
|
|
#define RTE_UART4_TX_DMA 0
|
|
#define RTE_UART4_TX_DMA_NUMBER 2
|
|
#define RTE_UART4_TX_DMA_CHANNEL 5
|
|
#define RTE_UART4_TX_DMA_PRIORITY 0
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> UART5 (Universal asynchronous receiver transmitter)
|
|
// <i> Configuration settings for Driver_USART5 in component ::CMSIS Driver:USART
|
|
#define RTE_UART5 0
|
|
#define RTE_UART5_AF_REMAP AFIO_UNAVAILABLE_REMAP
|
|
|
|
// <o> UART5_TX Pin <0=>Not Used <1=>PC12
|
|
#define RTE_UART5_TX_ID 0
|
|
#if (RTE_UART5_TX_ID == 0)
|
|
#define RTE_UART5_TX 0
|
|
#elif (RTE_UART5_TX_ID == 1)
|
|
#define RTE_UART5_TX 1
|
|
#define RTE_UART5_TX_PORT GPIOC
|
|
#define RTE_UART5_TX_BIT 12
|
|
#else
|
|
#error "Invalid UART5_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> UART5_RX Pin <0=>Not Used <1=>PD2
|
|
#define RTE_UART5_RX_ID 0
|
|
#if (RTE_UART5_RX_ID == 0)
|
|
#define RTE_UART5_RX 0
|
|
#elif (RTE_UART5_RX_ID == 1)
|
|
#define RTE_UART5_RX 1
|
|
#define RTE_UART5_RX_PORT GPIOD
|
|
#define RTE_UART5_RX_BIT 2
|
|
#else
|
|
#error "Invalid UART5_RX Pin Configuration!"
|
|
#endif
|
|
// </e>
|
|
|
|
|
|
// <e> I2C1 (Inter-integrated Circuit Interface 1)
|
|
// <i> Configuration settings for Driver_I2C1 in component ::CMSIS Driver:I2C
|
|
#define RTE_I2C1 0
|
|
|
|
// <o> I2C1_SCL Pin <0=>PB6
|
|
#define RTE_I2C1_SCL_PORT_ID_DEF 0
|
|
#if (RTE_I2C1_SCL_PORT_ID_DEF == 0)
|
|
#define RTE_I2C1_SCL_PORT_DEF GPIOB
|
|
#define RTE_I2C1_SCL_BIT_DEF 6
|
|
#else
|
|
#error "Invalid I2C1_SCL Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> I2C1_SDA Pin <0=>PB7
|
|
#define RTE_I2C1_SDA_PORT_ID_DEF 0
|
|
#if (RTE_I2C1_SDA_PORT_ID_DEF == 0)
|
|
#define RTE_I2C1_SDA_PORT_DEF GPIOB
|
|
#define RTE_I2C1_SDA_BIT_DEF 7
|
|
#else
|
|
#error "Invalid I2C1_SCL Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> I2C1 Pin Remap
|
|
// <i> Enable I2C1 Pin Remapping
|
|
#define RTE_I2C1_REMAP_FULL 0
|
|
|
|
// <o> I2C1_SCL Pin <0=>PB8
|
|
#define RTE_I2C1_SCL_PORT_ID_FULL 0
|
|
#if (RTE_I2C1_SCL_PORT_ID_FULL == 0)
|
|
#define RTE_I2C1_SCL_PORT_FULL GPIOB
|
|
#define RTE_I2C1_SCL_BIT_FULL 8
|
|
#else
|
|
#error "Invalid I2C1_SCL Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> I2C1_SDA Pin <0=>PB9
|
|
#define RTE_I2C1_SDA_PORT_ID_FULL 0
|
|
#if (RTE_I2C1_SDA_PORT_ID_FULL == 0)
|
|
#define RTE_I2C1_SDA_PORT_FULL GPIOB
|
|
#define RTE_I2C1_SDA_BIT_FULL 9
|
|
#else
|
|
#error "Invalid I2C1_SCL Pin Configuration!"
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
#if (RTE_I2C1_REMAP_FULL)
|
|
#define RTE_I2C1_AF_REMAP AFIO_I2C1_REMAP
|
|
#define RTE_I2C1_SCL_PORT RTE_I2C1_SCL_PORT_FULL
|
|
#define RTE_I2C1_SCL_BIT RTE_I2C1_SCL_BIT_FULL
|
|
#define RTE_I2C1_SDA_PORT RTE_I2C1_SDA_PORT_FULL
|
|
#define RTE_I2C1_SDA_BIT RTE_I2C1_SDA_BIT_FULL
|
|
#else
|
|
#define RTE_I2C1_AF_REMAP AFIO_I2C1_NO_REMAP
|
|
#define RTE_I2C1_SCL_PORT RTE_I2C1_SCL_PORT_DEF
|
|
#define RTE_I2C1_SCL_BIT RTE_I2C1_SCL_BIT_DEF
|
|
#define RTE_I2C1_SDA_PORT RTE_I2C1_SDA_PORT_DEF
|
|
#define RTE_I2C1_SDA_BIT RTE_I2C1_SDA_BIT_DEF
|
|
#endif
|
|
|
|
|
|
// <e> DMA Rx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <7=>7
|
|
// <i> Selects DMA Channel (only Channel 7 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_I2C1_RX_DMA 0
|
|
#define RTE_I2C1_RX_DMA_NUMBER 1
|
|
#define RTE_I2C1_RX_DMA_CHANNEL 7
|
|
#define RTE_I2C1_RX_DMA_PRIORITY 0
|
|
|
|
// <e> DMA Tx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <6=>6
|
|
// <i> Selects DMA Channel (only Channel 6 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_I2C1_TX_DMA 0
|
|
#define RTE_I2C1_TX_DMA_NUMBER 1
|
|
#define RTE_I2C1_TX_DMA_CHANNEL 6
|
|
#define RTE_I2C1_TX_DMA_PRIORITY 0
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> I2C2 (Inter-integrated Circuit Interface 2)
|
|
// <i> Configuration settings for Driver_I2C2 in component ::CMSIS Driver:I2C
|
|
#define RTE_I2C2 0
|
|
#define RTE_I2C2_AF_REMAP AFIO_UNAVAILABLE_REMAP
|
|
|
|
// <o> I2C2_SCL Pin <0=>PB10
|
|
#define RTE_I2C2_SCL_PORT_ID 0
|
|
#if (RTE_I2C2_SCL_PORT_ID == 0)
|
|
#define RTE_I2C2_SCL_PORT GPIOB
|
|
#define RTE_I2C2_SCL_BIT 10
|
|
#else
|
|
#error "Invalid I2C2_SCL Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> I2C2_SDA Pin <0=>PB11
|
|
#define RTE_I2C2_SDA_PORT_ID 0
|
|
#if (RTE_I2C2_SDA_PORT_ID == 0)
|
|
#define RTE_I2C2_SDA_PORT GPIOB
|
|
#define RTE_I2C2_SDA_BIT 11
|
|
#else
|
|
#error "Invalid I2C2_SCL Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> DMA Rx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <5=>5
|
|
// <i> Selects DMA Channel (only Channel 5 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_I2C2_RX_DMA 1
|
|
#define RTE_I2C2_RX_DMA_NUMBER 1
|
|
#define RTE_I2C2_RX_DMA_CHANNEL 5
|
|
#define RTE_I2C2_RX_DMA_PRIORITY 0
|
|
|
|
// <e> DMA Tx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <4=>4
|
|
// <i> Selects DMA Channel (only Channel 4 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_I2C2_TX_DMA 1
|
|
#define RTE_I2C2_TX_DMA_NUMBER 1
|
|
#define RTE_I2C2_TX_DMA_CHANNEL 4
|
|
#define RTE_I2C2_TX_DMA_PRIORITY 0
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> SPI1 (Serial Peripheral Interface 1) [Driver_SPI1]
|
|
// <i> Configuration settings for Driver_SPI1 in component ::CMSIS Driver:SPI
|
|
#define RTE_SPI1 0
|
|
|
|
// <e> SPI1_NSS Pin
|
|
// <i> Configure Pin if exists
|
|
// <i> GPIO Pxy (x = A..G, y = 0..15)
|
|
// <o1> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
|
|
// <4=>GPIOE <5=>GPIOF <6=>GPIOG
|
|
// <i> Selects Port Name
|
|
// <o2> Bit <0-15>
|
|
// <i> Selects Port Bit
|
|
// </e>
|
|
#define RTE_SPI1_NSS_PIN 1
|
|
#define RTE_SPI1_NSS_PORT GPIO_PORT(0)
|
|
#define RTE_SPI1_NSS_BIT 4
|
|
|
|
// <o> SPI1_SCK Pin <0=>PA5
|
|
#define RTE_SPI1_SCK_PORT_ID_DEF 0
|
|
#if (RTE_SPI1_SCK_PORT_ID_DEF == 0)
|
|
#define RTE_SPI1_SCK_PORT_DEF GPIOA
|
|
#define RTE_SPI1_SCK_BIT_DEF 5
|
|
#else
|
|
#error "Invalid SPI1_SCK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> SPI1_MISO Pin <0=>Not Used <1=>PA6
|
|
#define RTE_SPI1_MISO_PORT_ID_DEF 0
|
|
#if (RTE_SPI1_MISO_PORT_ID_DEF == 0)
|
|
#define RTE_SPI1_MISO_DEF 0
|
|
#elif (RTE_SPI1_MISO_PORT_ID_DEF == 1)
|
|
#define RTE_SPI1_MISO_DEF 1
|
|
#define RTE_SPI1_MISO_PORT_DEF GPIOA
|
|
#define RTE_SPI1_MISO_BIT_DEF 6
|
|
#else
|
|
#error "Invalid SPI1_MISO Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> SPI1_MOSI Pin <0=>Not Used <1=>PA7
|
|
#define RTE_SPI1_MOSI_PORT_ID_DEF 0
|
|
#if (RTE_SPI1_MOSI_PORT_ID_DEF == 0)
|
|
#define RTE_SPI1_MOSI_DEF 0
|
|
#elif (RTE_SPI1_MOSI_PORT_ID_DEF == 1)
|
|
#define RTE_SPI1_MOSI_DEF 1
|
|
#define RTE_SPI1_MOSI_PORT_DEF GPIOA
|
|
#define RTE_SPI1_MOSI_BIT_DEF 7
|
|
#else
|
|
#error "Invalid SPI1_MISO Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> SPI1 Pin Remap
|
|
// <i> Enable SPI1 Pin Remapping.
|
|
#define RTE_SPI1_REMAP 0
|
|
|
|
// <o> SPI1_SCK Pin <0=>PB3
|
|
#define RTE_SPI1_SCK_PORT_ID_FULL 0
|
|
#if (RTE_SPI1_SCK_PORT_ID_FULL == 0)
|
|
#define RTE_SPI1_SCK_PORT_FULL GPIOB
|
|
#define RTE_SPI1_SCK_BIT_FULL 3
|
|
#else
|
|
#error "Invalid SPI1_SCK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> SPI1_MISO Pin <0=>Not Used <1=>PB4
|
|
#define RTE_SPI1_MISO_PORT_ID_FULL 0
|
|
#if (RTE_SPI1_MISO_PORT_ID_FULL == 0)
|
|
#define RTE_SPI1_MISO_FULL 0
|
|
#elif (RTE_SPI1_MISO_PORT_ID_FULL == 1)
|
|
#define RTE_SPI1_MISO_FULL 1
|
|
#define RTE_SPI1_MISO_PORT_FULL GPIOB
|
|
#define RTE_SPI1_MISO_BIT_FULL 4
|
|
#else
|
|
#error "Invalid SPI1_MISO Pin Configuration!"
|
|
#endif
|
|
// <o> SPI1_MOSI Pin <0=>Not Used <1=>PB5
|
|
#define RTE_SPI1_MOSI_PORT_ID_FULL 0
|
|
#if (RTE_SPI1_MOSI_PORT_ID_FULL == 0)
|
|
#define RTE_SPI1_MOSI_FULL 0
|
|
#elif (RTE_SPI1_MOSI_PORT_ID_FULL == 1)
|
|
#define RTE_SPI1_MOSI_FULL 1
|
|
#define RTE_SPI1_MOSI_PORT_FULL GPIOB
|
|
#define RTE_SPI1_MOSI_BIT_FULL 5
|
|
#else
|
|
#error "Invalid SPI1_MOSI Pin Configuration!"
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
#if (RTE_SPI1_REMAP)
|
|
#define RTE_SPI1_AF_REMAP AFIO_SPI1_REMAP
|
|
#define RTE_SPI1_SCK_PORT RTE_SPI1_SCK_PORT_FULL
|
|
#define RTE_SPI1_SCK_BIT RTE_SPI1_SCK_BIT_FULL
|
|
#define RTE_SPI1_MISO RTE_SPI1_MISO_FULL
|
|
#define RTE_SPI1_MISO_PORT RTE_SPI1_MISO_PORT_FULL
|
|
#define RTE_SPI1_MISO_BIT RTE_SPI1_MISO_BIT_FULL
|
|
#define RTE_SPI1_MOSI RTE_SPI1_MOSI_FULL
|
|
#define RTE_SPI1_MOSI_PORT RTE_SPI1_MOSI_PORT_FULL
|
|
#define RTE_SPI1_MOSI_BIT RTE_SPI1_MOSI_BIT_FULL
|
|
#else
|
|
#define RTE_SPI1_AF_REMAP AFIO_SPI1_NO_REMAP
|
|
#define RTE_SPI1_SCK_PORT RTE_SPI1_SCK_PORT_DEF
|
|
#define RTE_SPI1_SCK_BIT RTE_SPI1_SCK_BIT_DEF
|
|
#define RTE_SPI1_MISO RTE_SPI1_MISO_DEF
|
|
#define RTE_SPI1_MISO_PORT RTE_SPI1_MISO_PORT_DEF
|
|
#define RTE_SPI1_MISO_BIT RTE_SPI1_MISO_BIT_DEF
|
|
#define RTE_SPI1_MOSI RTE_SPI1_MOSI_DEF
|
|
#define RTE_SPI1_MOSI_PORT RTE_SPI1_MOSI_PORT_DEF
|
|
#define RTE_SPI1_MOSI_BIT RTE_SPI1_MOSI_BIT_DEF
|
|
#endif
|
|
|
|
// <e> DMA Rx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <2=>2
|
|
// <i> Selects DMA Channel (only Channel 2 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_SPI1_RX_DMA 0
|
|
#define RTE_SPI1_RX_DMA_NUMBER 1
|
|
#define RTE_SPI1_RX_DMA_CHANNEL 2
|
|
#define RTE_SPI1_RX_DMA_PRIORITY 0
|
|
|
|
// <e> DMA Tx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <3=>3
|
|
// <i> Selects DMA Channel (only Channel 3 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_SPI1_TX_DMA 0
|
|
#define RTE_SPI1_TX_DMA_NUMBER 1
|
|
#define RTE_SPI1_TX_DMA_CHANNEL 3
|
|
#define RTE_SPI1_TX_DMA_PRIORITY 0
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> SPI2 (Serial Peripheral Interface 2) [Driver_SPI2]
|
|
// <i> Configuration settings for Driver_SPI2 in component ::CMSIS Driver:SPI
|
|
#define RTE_SPI2 0
|
|
|
|
// <e> SPI2_NSS Pin
|
|
// <i> Configure Pin if exists
|
|
// <i> GPIO Pxy (x = A..G, y = 0..15)
|
|
// <o1> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
|
|
// <4=>GPIOE <5=>GPIOF <6=>GPIOG
|
|
// <i> Selects Port Name
|
|
// <o2> Bit <0-15>
|
|
// <i> Selects Port Bit
|
|
// </e>
|
|
#define RTE_SPI2_NSS_PIN 1
|
|
#define RTE_SPI2_NSS_PORT GPIO_PORT(1)
|
|
#define RTE_SPI2_NSS_BIT 12
|
|
|
|
// <o> SPI2_SCK Pin <0=>PB13
|
|
#define RTE_SPI2_SCK_PORT_ID 0
|
|
#if (RTE_SPI2_SCK_PORT_ID == 0)
|
|
#define RTE_SPI2_SCK_PORT GPIOB
|
|
#define RTE_SPI2_SCK_BIT 13
|
|
#define RTE_SPI2_SCK_REMAP 0
|
|
#else
|
|
#error "Invalid SPI2_SCK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> SPI2_MISO Pin <0=>Not Used <1=>PB14
|
|
#define RTE_SPI2_MISO_PORT_ID 0
|
|
#if (RTE_SPI2_MISO_PORT_ID == 0)
|
|
#define RTE_SPI2_MISO 0
|
|
#elif (RTE_SPI2_MISO_PORT_ID == 1)
|
|
#define RTE_SPI2_MISO 1
|
|
#define RTE_SPI2_MISO_PORT GPIOB
|
|
#define RTE_SPI2_MISO_BIT 14
|
|
#define RTE_SPI2_MISO_REMAP 0
|
|
#else
|
|
#error "Invalid SPI2_MISO Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> SPI2_MOSI Pin <0=>Not Used <1=>PB15
|
|
#define RTE_SPI2_MOSI_PORT_ID 0
|
|
#if (RTE_SPI2_MOSI_PORT_ID == 0)
|
|
#define RTE_SPI2_MOSI 0
|
|
#elif (RTE_SPI2_MOSI_PORT_ID == 1)
|
|
#define RTE_SPI2_MOSI 1
|
|
#define RTE_SPI2_MOSI_PORT GPIOB
|
|
#define RTE_SPI2_MOSI_BIT 15
|
|
#define RTE_SPI2_MOSI_REMAP 0
|
|
#else
|
|
#error "Invalid SPI2_MISO Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> DMA Rx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <4=>4
|
|
// <i> Selects DMA Channel (only Channel 4 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_SPI2_RX_DMA 0
|
|
#define RTE_SPI2_RX_DMA_NUMBER 1
|
|
#define RTE_SPI2_RX_DMA_CHANNEL 4
|
|
#define RTE_SPI2_RX_DMA_PRIORITY 0
|
|
|
|
// <e> DMA Tx
|
|
// <o1> Number <1=>1
|
|
// <i> Selects DMA Number (only DMA1 can be used)
|
|
// <o2> Channel <5=>5
|
|
// <i> Selects DMA Channel (only Channel 5 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_SPI2_TX_DMA 0
|
|
#define RTE_SPI2_TX_DMA_NUMBER 1
|
|
#define RTE_SPI2_TX_DMA_CHANNEL 5
|
|
#define RTE_SPI2_TX_DMA_PRIORITY 0
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> SPI3 (Serial Peripheral Interface 3) [Driver_SPI3]
|
|
// <i> Configuration settings for Driver_SPI3 in component ::CMSIS Driver:SPI
|
|
#define RTE_SPI3 0
|
|
|
|
// <e> SPI3_NSS Pin
|
|
// <i> Configure Pin if exists
|
|
// <i> GPIO Pxy (x = A..G, y = 0..15)
|
|
// <o1> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
|
|
// <4=>GPIOE <5=>GPIOF <6=>GPIOG
|
|
// <i> Selects Port Name
|
|
// <o2> Bit <0-15>
|
|
// <i> Selects Port Bit
|
|
// </e>
|
|
#define RTE_SPI3_NSS_PIN 1
|
|
#define RTE_SPI3_NSS_PORT GPIO_PORT(0)
|
|
#define RTE_SPI3_NSS_BIT 15
|
|
|
|
// <o> SPI3_SCK Pin <0=>PB3
|
|
#define RTE_SPI3_SCK_PORT_ID_DEF 0
|
|
#if (RTE_SPI3_SCK_PORT_ID_DEF == 0)
|
|
#define RTE_SPI3_SCK_PORT_DEF GPIOB
|
|
#define RTE_SPI3_SCK_BIT_DEF 3
|
|
#else
|
|
#error "Invalid SPI3_SCK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> SPI3_MISO Pin <0=>Not Used <1=>PB4
|
|
#define RTE_SPI3_MISO_PORT_ID_DEF 0
|
|
#if (RTE_SPI3_MISO_PORT_ID_DEF == 0)
|
|
#define RTE_SPI3_MISO_DEF 0
|
|
#elif (RTE_SPI3_MISO_PORT_ID_DEF == 1)
|
|
#define RTE_SPI3_MISO_DEF 1
|
|
#define RTE_SPI3_MISO_PORT_DEF GPIOB
|
|
#define RTE_SPI3_MISO_BIT_DEF 4
|
|
#else
|
|
#error "Invalid SPI3_MISO Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> SPI3_MOSI <0=>Not Used Pin <1=>PB5
|
|
#define RTE_SPI3_MOSI_PORT_ID_DEF 0
|
|
#if (RTE_SPI3_MOSI_PORT_ID_DEF == 0)
|
|
#define RTE_SPI3_MOSI_DEF 0
|
|
#elif (RTE_SPI3_MOSI_PORT_ID_DEF == 1)
|
|
#define RTE_SPI3_MOSI_DEF 1
|
|
#define RTE_SPI3_MOSI_PORT_DEF GPIOB
|
|
#define RTE_SPI3_MOSI_BIT_DEF 5
|
|
#else
|
|
#error "Invalid SPI3_MOSI Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> SPI3 Pin Remap
|
|
// <i> Enable SPI3 Pin Remapping.
|
|
// <i> SPI 3 Pin Remapping is available only in connectivity line devices!
|
|
#define RTE_SPI3_REMAP 0
|
|
|
|
// <o> SPI3_SCK Pin <0=>PC10
|
|
#define RTE_SPI3_SCK_PORT_ID_FULL 0
|
|
#if (RTE_SPI3_SCK_PORT_ID_FULL == 0)
|
|
#define RTE_SPI3_SCK_PORT_FULL GPIOC
|
|
#define RTE_SPI3_SCK_BIT_FULL 10
|
|
#else
|
|
#error "Invalid SPI3_SCK Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> SPI3_MISO Pin <0=>Not Used <1=>PC11
|
|
#define RTE_SPI3_MISO_PORT_ID_FULL 0
|
|
#if (RTE_SPI3_MISO_PORT_ID_FULL == 0)
|
|
#define RTE_SPI3_MISO_FULL 0
|
|
#elif (RTE_SPI3_MISO_PORT_ID_FULL == 1)
|
|
#define RTE_SPI3_MISO_FULL 1
|
|
#define RTE_SPI3_MISO_PORT_FULL GPIOC
|
|
#define RTE_SPI3_MISO_BIT_FULL 11
|
|
#else
|
|
#error "Invalid SPI3_MISO Pin Configuration!"
|
|
#endif
|
|
// <o> SPI3_MOSI Pin <0=>Not Used <1=>PC12
|
|
#define RTE_SPI3_MOSI_PORT_ID_FULL 0
|
|
#if (RTE_SPI3_MOSI_PORT_ID_FULL == 0)
|
|
#define RTE_SPI3_MOSI_FULL 0
|
|
#elif (RTE_SPI3_MOSI_PORT_ID_FULL == 1)
|
|
#define RTE_SPI3_MOSI_FULL 1
|
|
#define RTE_SPI3_MOSI_PORT_FULL GPIOC
|
|
#define RTE_SPI3_MOSI_BIT_FULL 12
|
|
#else
|
|
#error "Invalid SPI3_MOSI Pin Configuration!"
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
#if (RTE_SPI3_REMAP)
|
|
#define RTE_SPI3_AF_REMAP AFIO_SPI3_REMAP
|
|
#define RTE_SPI3_SCK_PORT RTE_SPI3_SCK_PORT_FULL
|
|
#define RTE_SPI3_SCK_BIT RTE_SPI3_SCK_BIT_FULL
|
|
#define RTE_SPI3_MISO RTE_SPI3_MISO_FULL
|
|
#define RTE_SPI3_MISO_PORT RTE_SPI3_MISO_PORT_FULL
|
|
#define RTE_SPI3_MISO_BIT RTE_SPI3_MISO_BIT_FULL
|
|
#define RTE_SPI3_MOSI RTE_SPI3_MOSI_FULL
|
|
#define RTE_SPI3_MOSI_PORT RTE_SPI3_MOSI_PORT_FULL
|
|
#define RTE_SPI3_MOSI_BIT RTE_SPI3_MOSI_BIT_FULL
|
|
#else
|
|
#define RTE_SPI3_AF_REMAP AFIO_SPI3_NO_REMAP
|
|
#define RTE_SPI3_SCK_PORT RTE_SPI3_SCK_PORT_DEF
|
|
#define RTE_SPI3_SCK_BIT RTE_SPI3_SCK_BIT_DEF
|
|
#define RTE_SPI3_MISO RTE_SPI3_MISO_DEF
|
|
#define RTE_SPI3_MISO_PORT RTE_SPI3_MISO_PORT_DEF
|
|
#define RTE_SPI3_MISO_BIT RTE_SPI3_MISO_BIT_DEF
|
|
#define RTE_SPI3_MOSI RTE_SPI3_MOSI_DEF
|
|
#define RTE_SPI3_MOSI_PORT RTE_SPI3_MOSI_PORT_DEF
|
|
#define RTE_SPI3_MOSI_BIT RTE_SPI3_MOSI_BIT_DEF
|
|
#endif
|
|
|
|
// <e> DMA Rx
|
|
// <o1> Number <2=>2
|
|
// <i> Selects DMA Number (only DMA2 can be used)
|
|
// <o2> Channel <1=>1
|
|
// <i> Selects DMA Channel (only Channel 1 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_SPI3_RX_DMA 0
|
|
#define RTE_SPI3_RX_DMA_NUMBER 2
|
|
#define RTE_SPI3_RX_DMA_CHANNEL 1
|
|
#define RTE_SPI3_RX_DMA_PRIORITY 0
|
|
|
|
// <e> DMA Tx
|
|
// <o1> Number <2=>2
|
|
// <i> Selects DMA Number (only DMA2 can be used)
|
|
// <o2> Channel <2=>2
|
|
// <i> Selects DMA Channel (only Channel 2 can be used)
|
|
// <o3> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </e>
|
|
#define RTE_SPI3_TX_DMA 0
|
|
#define RTE_SPI3_TX_DMA_NUMBER 2
|
|
#define RTE_SPI3_TX_DMA_CHANNEL 2
|
|
#define RTE_SPI3_TX_DMA_PRIORITY 0
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> SDIO (Secure Digital Input/Output) [Driver_MCI0]
|
|
// <i> Configuration settings for Driver_MCI0 in component ::CMSIS Driver:MCI
|
|
#define RTE_SDIO 0
|
|
|
|
// <h> SDIO Peripheral Bus
|
|
// <o> SDIO_CK Pin <0=>PC12
|
|
#define RTE_SDIO_CK_PORT_ID 0
|
|
#if (RTE_SDIO_CK_PORT_ID == 0)
|
|
#define RTE_SDIO_CK_PORT GPIOC
|
|
#define RTE_SDIO_CK_PIN 12
|
|
#else
|
|
#error "Invalid SDIO_CLK Pin Configuration!"
|
|
#endif
|
|
// <o> SDIO_CMD Pin <0=>PD2
|
|
#define RTE_SDIO_CMD_PORT_ID 0
|
|
#if (RTE_SDIO_CMD_PORT_ID == 0)
|
|
#define RTE_SDIO_CMD_PORT GPIOD
|
|
#define RTE_SDIO_CMD_PIN 2
|
|
#else
|
|
#error "Invalid SDIO_CMD Pin Configuration!"
|
|
#endif
|
|
// <o> SDIO_D0 Pin <0=>PC8
|
|
#define RTE_SDIO_D0_PORT_ID 0
|
|
#if (RTE_SDIO_D0_PORT_ID == 0)
|
|
#define RTE_SDIO_D0_PORT GPIOC
|
|
#define RTE_SDIO_D0_PIN 8
|
|
#else
|
|
#error "Invalid SDIO_DAT0 Pin Configuration!"
|
|
#endif
|
|
// <e> SDIO_D[1 .. 3]
|
|
#define RTE_SDIO_BUS_WIDTH_4 1
|
|
// <o> SDIO_D1 Pin <0=>PC9
|
|
#define RTE_SDIO_D1_PORT_ID 0
|
|
#if (RTE_SDIO_D1_PORT_ID == 0)
|
|
#define RTE_SDIO_D1_PORT GPIOC
|
|
#define RTE_SDIO_D1_PIN 9
|
|
#else
|
|
#error "Invalid SDIO_D1 Pin Configuration!"
|
|
#endif
|
|
// <o> SDIO_D2 Pin <0=>PC10
|
|
#define RTE_SDIO_D2_PORT_ID 0
|
|
#if (RTE_SDIO_D2_PORT_ID == 0)
|
|
#define RTE_SDIO_D2_PORT GPIOC
|
|
#define RTE_SDIO_D2_PIN 10
|
|
#else
|
|
#error "Invalid SDIO_D2 Pin Configuration!"
|
|
#endif
|
|
// <o> SDIO_D3 Pin <0=>PC11
|
|
#define RTE_SDIO_D3_PORT_ID 0
|
|
#if (RTE_SDIO_D3_PORT_ID == 0)
|
|
#define RTE_SDIO_D3_PORT GPIOC
|
|
#define RTE_SDIO_D3_PIN 11
|
|
#else
|
|
#error "Invalid SDIO_D3 Pin Configuration!"
|
|
#endif
|
|
// </e> SDIO_D[1 .. 3]
|
|
// <e> SDIO_D[4 .. 7]
|
|
#define RTE_SDIO_BUS_WIDTH_8 0
|
|
// <o> SDIO_D4 Pin <0=>PB8
|
|
#define RTE_SDIO_D4_PORT_ID 0
|
|
#if (RTE_SDIO_D4_PORT_ID == 0)
|
|
#define RTE_SDIO_D4_PORT GPIOB
|
|
#define RTE_SDIO_D4_PIN 8
|
|
#else
|
|
#error "Invalid SDIO_D4 Pin Configuration!"
|
|
#endif
|
|
// <o> SDIO_D5 Pin <0=>PB9
|
|
#define RTE_SDIO_D5_PORT_ID 0
|
|
#if (RTE_SDIO_D5_PORT_ID == 0)
|
|
#define RTE_SDIO_D5_PORT GPIOB
|
|
#define RTE_SDIO_D5_PIN 9
|
|
#else
|
|
#error "Invalid SDIO_D5 Pin Configuration!"
|
|
#endif
|
|
// <o> SDIO_D6 Pin <0=>PC6
|
|
#define RTE_SDIO_D6_PORT_ID 0
|
|
#if (RTE_SDIO_D6_PORT_ID == 0)
|
|
#define RTE_SDIO_D6_PORT GPIOC
|
|
#define RTE_SDIO_D6_PIN 6
|
|
#else
|
|
#error "Invalid SDIO_D6 Pin Configuration!"
|
|
#endif
|
|
// <o> SDIO_D7 Pin <0=>PC7
|
|
#define RTE_SDIO_D7_PORT_ID 0
|
|
#if (RTE_SDIO_D7_PORT_ID == 0)
|
|
#define RTE_SDIO_D7_PORT GPIOC
|
|
#define RTE_SDIO_D7_PIN 7
|
|
#else
|
|
#error "Invalid SDIO_D7 Pin Configuration!"
|
|
#endif
|
|
// </e> SDIO_D[4 .. 7]
|
|
// </h> SDIO Peripheral Bus
|
|
|
|
// <e> Card Detect Pin
|
|
// <i> Configure Pin if exists
|
|
// <i> GPIO Pxy (x = A..H, y = 0..15) or (x = I, y = 0..11)
|
|
// <o1> Active State <0=>Low <1=>High
|
|
// <i> Selects Active State Logical Level
|
|
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
|
|
// <4=>GPIOE <5=>GPIOF <6=>GPIOG
|
|
// <i> Selects Port Name
|
|
// <o3> Bit <0-15>
|
|
// <i> Selects Port Bit
|
|
// </e>
|
|
#define RTE_SDIO_CD_EN 1
|
|
#define RTE_SDIO_CD_ACTIVE 0
|
|
#define RTE_SDIO_CD_PORT GPIO_PORT(5)
|
|
#define RTE_SDIO_CD_PIN 11
|
|
|
|
// <e> Write Protect Pin
|
|
// <i> Configure Pin if exists
|
|
// <i> GPIO Pxy (x = A..H, y = 0..15) or (x = I, y = 0..11)
|
|
// <o1> Active State <0=>Low <1=>High
|
|
// <i> Selects Active State Logical Level
|
|
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
|
|
// <4=>GPIOE <5=>GPIOF <6=>GPIOG
|
|
// <i> Selects Port Name
|
|
// <o3> Bit <0-15>
|
|
// <i> Selects Port Bit
|
|
// </e>
|
|
#define RTE_SDIO_WP_EN 0
|
|
#define RTE_SDIO_WP_ACTIVE 1
|
|
#define RTE_SDIO_WP_PORT GPIO_PORT(0)
|
|
#define RTE_SDIO_WP_PIN 10
|
|
|
|
// <h> DMA
|
|
// <o0> Number <2=>2
|
|
// <i> Selects DMA Number (only DMA2 can be used)
|
|
// <o1> Channel <4=>4
|
|
// <i> Selects DMA Channel (only Channel 4 can be used)
|
|
// <o2> Priority <0=>Low <1=>Medium <2=>High <3=>Very High
|
|
// <i> Selects DMA Priority
|
|
// </h>
|
|
#define RTE_SDIO_DMA_NUMBER 2
|
|
#define RTE_SDIO_DMA_CHANNEL 4
|
|
#define RTE_SDIO_DMA_PRIORITY 0
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> CAN1 (Controller Area Network 1) [Driver_CAN1]
|
|
// <i> Configuration settings for Driver_CAN1 in component ::CMSIS Driver:CAN
|
|
#define RTE_CAN1 0
|
|
|
|
// <o> CAN1_RX Pin <0=>PA11 <1=>PB8 <2=>PD0
|
|
#define RTE_CAN1_RX_PORT_ID 0
|
|
#if (RTE_CAN1_RX_PORT_ID == 0)
|
|
#define RTE_CAN1_RX_PORT GPIOA
|
|
#define RTE_CAN1_RX_BIT 11
|
|
#elif (RTE_CAN1_RX_PORT_ID == 1)
|
|
#define RTE_CAN1_RX_PORT GPIOB
|
|
#define RTE_CAN1_RX_BIT 8
|
|
#elif (RTE_CAN1_RX_PORT_ID == 2)
|
|
#define RTE_CAN1_RX_PORT GPIOD
|
|
#define RTE_CAN1_RX_BIT 0
|
|
#else
|
|
#error "Invalid CAN1_RX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> CAN1_TX Pin <0=>PA12 <1=>PB9 <2=>PD1
|
|
#define RTE_CAN1_TX_PORT_ID 0
|
|
#if (RTE_CAN1_TX_PORT_ID == 0)
|
|
#define RTE_CAN1_TX_PORT GPIOA
|
|
#define RTE_CAN1_TX_BIT 12
|
|
#elif (RTE_CAN1_TX_PORT_ID == 1)
|
|
#define RTE_CAN1_TX_PORT GPIOB
|
|
#define RTE_CAN1_TX_BIT 9
|
|
#elif (RTE_CAN1_TX_PORT_ID == 2)
|
|
#define RTE_CAN1_TX_PORT GPIOD
|
|
#define RTE_CAN1_TX_BIT 1
|
|
#else
|
|
#error "Invalid CAN1_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> CAN2 (Controller Area Network 2) [Driver_CAN2]
|
|
// <i> Configuration settings for Driver_CAN2 in component ::CMSIS Driver:CAN
|
|
#define RTE_CAN2 0
|
|
|
|
// <o> CAN2_RX Pin <0=>PB5 <1=>PB12
|
|
#define RTE_CAN2_RX_PORT_ID 0
|
|
#if (RTE_CAN2_RX_PORT_ID == 0)
|
|
#define RTE_CAN2_RX_PORT GPIOB
|
|
#define RTE_CAN2_RX_BIT 5
|
|
#elif (RTE_CAN2_RX_PORT_ID == 1)
|
|
#define RTE_CAN2_RX_PORT GPIOB
|
|
#define RTE_CAN2_RX_BIT 12
|
|
#else
|
|
#error "Invalid CAN2_RX Pin Configuration!"
|
|
#endif
|
|
|
|
// <o> CAN2_TX Pin <0=>PB6 <1=>PB13
|
|
#define RTE_CAN2_TX_PORT_ID 0
|
|
#if (RTE_CAN2_TX_PORT_ID == 0)
|
|
#define RTE_CAN2_TX_PORT GPIOB
|
|
#define RTE_CAN2_TX_BIT 6
|
|
#elif (RTE_CAN2_TX_PORT_ID == 1)
|
|
#define RTE_CAN2_TX_PORT GPIOB
|
|
#define RTE_CAN2_TX_BIT 13
|
|
#else
|
|
#error "Invalid CAN2_TX Pin Configuration!"
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> ETH (Ethernet Interface) [Driver_ETH_MAC0]
|
|
// <i> Configuration settings for Driver_ETH_MAC0 in component ::CMSIS Driver:Ethernet MAC
|
|
#define RTE_ETH 0
|
|
|
|
// <e> MII (Media Independent Interface)
|
|
// <i> Enable Media Independent Interface pin configuration
|
|
#define RTE_ETH_MII 0
|
|
|
|
// <o> ETH_MII_TX_CLK Pin <0=>PC3
|
|
#define RTE_ETH_MII_TX_CLK_PORT_ID 0
|
|
#if (RTE_ETH_MII_TX_CLK_PORT_ID == 0)
|
|
#define RTE_ETH_MII_TX_CLK_PORT GPIOC
|
|
#define RTE_ETH_MII_TX_CLK_PIN 3
|
|
#else
|
|
#error "Invalid ETH_MII_TX_CLK Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MII_TXD0 Pin <0=>PB12
|
|
#define RTE_ETH_MII_TXD0_PORT_ID 0
|
|
#if (RTE_ETH_MII_TXD0_PORT_ID == 0)
|
|
#define RTE_ETH_MII_TXD0_PORT GPIOB
|
|
#define RTE_ETH_MII_TXD0_PIN 12
|
|
#else
|
|
#error "Invalid ETH_MII_TXD0 Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MII_TXD1 Pin <0=>PB13
|
|
#define RTE_ETH_MII_TXD1_PORT_ID 0
|
|
#if (RTE_ETH_MII_TXD1_PORT_ID == 0)
|
|
#define RTE_ETH_MII_TXD1_PORT GPIOB
|
|
#define RTE_ETH_MII_TXD1_PIN 13
|
|
#else
|
|
#error "Invalid ETH_MII_TXD1 Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MII_TXD2 Pin <0=>PC2
|
|
#define RTE_ETH_MII_TXD2_PORT_ID 0
|
|
#if (RTE_ETH_MII_TXD2_PORT_ID == 0)
|
|
#define RTE_ETH_MII_TXD2_PORT GPIOC
|
|
#define RTE_ETH_MII_TXD2_PIN 2
|
|
#else
|
|
#error "Invalid ETH_MII_TXD2 Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MII_TXD3 Pin <0=>PB8
|
|
#define RTE_ETH_MII_TXD3_PORT_ID 0
|
|
#if (RTE_ETH_MII_TXD3_PORT_ID == 0)
|
|
#define RTE_ETH_MII_TXD3_PORT GPIOB
|
|
#define RTE_ETH_MII_TXD3_PIN 8
|
|
#else
|
|
#error "Invalid ETH_MII_TXD3 Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MII_TX_EN Pin <0=>PB11
|
|
#define RTE_ETH_MII_TX_EN_PORT_ID 0
|
|
#if (RTE_ETH_MII_TX_EN_PORT_ID == 0)
|
|
#define RTE_ETH_MII_TX_EN_PORT GPIOB
|
|
#define RTE_ETH_MII_TX_EN_PIN 11
|
|
#else
|
|
#error "Invalid ETH_MII_TX_EN Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MII_RX_CLK Pin <0=>PA1
|
|
#define RTE_ETH_MII_RX_CLK_PORT_ID 0
|
|
#if (RTE_ETH_MII_RX_CLK_PORT_ID == 0)
|
|
#define RTE_ETH_MII_RX_CLK_PORT GPIOA
|
|
#define RTE_ETH_MII_RX_CLK_PIN 1
|
|
#else
|
|
#error "Invalid ETH_MII_RX_CLK Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MII_RXD0 Pin <0=>PC4
|
|
#define RTE_ETH_MII_RXD0_DEF 0
|
|
|
|
// <o> ETH_MII_RXD1 Pin <0=>PC5
|
|
#define RTE_ETH_MII_RXD1_DEF 0
|
|
|
|
// <o> ETH_MII_RXD2 Pin <0=>PB0
|
|
#define RTE_ETH_MII_RXD2_DEF 0
|
|
|
|
// <o> ETH_MII_RXD3 Pin <0=>PB1 <1=>PD12
|
|
#define RTE_ETH_MII_RXD3_DEF 0
|
|
|
|
// <o> ETH_MII_RX_DV Pin <0=>PA7
|
|
#define RTE_ETH_MII_RX_DV_DEF 0
|
|
|
|
// <o> ETH_MII_RX_ER Pin <0=>PB10
|
|
#define RTE_ETH_MII_RX_ER_PORT_ID 0
|
|
#if (RTE_ETH_MII_RX_ER_PORT_ID == 0)
|
|
#define RTE_ETH_MII_RX_ER_PORT GPIOB
|
|
#define RTE_ETH_MII_RX_ER_PIN 10
|
|
#else
|
|
#error "Invalid ETH_MII_RX_ER Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MII_CRS Pin <0=>PA0
|
|
#define RTE_ETH_MII_CRS_PORT_ID 0
|
|
#if (RTE_ETH_MII_CRS_PORT_ID == 0)
|
|
#define RTE_ETH_MII_CRS_PORT GPIOA
|
|
#define RTE_ETH_MII_CRS_PIN 0
|
|
#else
|
|
#error "Invalid ETH_MII_CRS Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MII_COL Pin <0=>PA3
|
|
#define RTE_ETH_MII_COL_PORT_ID 0
|
|
#if (RTE_ETH_MII_COL_PORT_ID == 0)
|
|
#define RTE_ETH_MII_COL_PORT GPIOA
|
|
#define RTE_ETH_MII_COL_PIN 3
|
|
#else
|
|
#error "Invalid ETH_MII_COL Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> Ethernet MAC I/O remapping
|
|
// <i> Remap Ethernet pins
|
|
#define RTE_ETH_MII_REMAP 0
|
|
|
|
// <o> ETH_MII_RXD0 Pin <1=>PD9
|
|
#define RTE_ETH_MII_RXD0_REMAP 1
|
|
|
|
// <o> ETH_MII_RXD1 Pin <1=>PD10
|
|
#define RTE_ETH_MII_RXD1_REMAP 1
|
|
|
|
// <o> ETH_MII_RXD2 Pin <1=>PD11
|
|
#define RTE_ETH_MII_RXD2_REMAP 1
|
|
|
|
// <o> ETH_MII_RXD3 Pin <1=>PD12
|
|
#define RTE_ETH_MII_RXD3_REMAP 1
|
|
|
|
// <o> ETH_MII_RX_DV Pin <1=>PD8
|
|
#define RTE_ETH_MII_RX_DV_REMAP 1
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
#if ((RTE_ETH_MII_REMAP == 0) && (RTE_ETH_MII_RXD0_DEF == 0))
|
|
#define RTE_ETH_MII_RXD0_PORT GPIOC
|
|
#define RTE_ETH_MII_RXD0_PIN 4
|
|
#elif ((RTE_ETH_MII_REMAP == 1) && (RTE_ETH_MII_RXD0_REMAP == 1))
|
|
#define RTE_ETH_MII_RXD0_PORT GPIOD
|
|
#define RTE_ETH_MII_RXD0_PIN 9
|
|
#else
|
|
#error "Invalid ETH_MII_RXD0 Pin Configuration!"
|
|
#endif
|
|
|
|
#if ((RTE_ETH_MII_REMAP == 0) && (RTE_ETH_MII_RXD1_DEF == 0))
|
|
#define RTE_ETH_MII_RXD1_PORT GPIOC
|
|
#define RTE_ETH_MII_RXD1_PIN 5
|
|
#elif ((RTE_ETH_MII_REMAP == 1) && (RTE_ETH_MII_RXD1_REMAP == 1))
|
|
#define RTE_ETH_MII_RXD1_PORT GPIOD
|
|
#define RTE_ETH_MII_RXD1_PIN 10
|
|
#else
|
|
#error "Invalid ETH_MII_RXD1 Pin Configuration!"
|
|
#endif
|
|
|
|
#if ((RTE_ETH_MII_REMAP == 0) && (RTE_ETH_MII_RXD2_DEF == 0))
|
|
#define RTE_ETH_MII_RXD2_PORT GPIOB
|
|
#define RTE_ETH_MII_RXD2_PIN 0
|
|
#elif ((RTE_ETH_MII_REMAP == 1) && (RTE_ETH_MII_RXD2_REMAP == 1))
|
|
#define RTE_ETH_MII_RXD2_PORT GPIOD
|
|
#define RTE_ETH_MII_RXD2_PIN 11
|
|
#else
|
|
#error "Invalid ETH_MII_RXD2 Pin Configuration!"
|
|
#endif
|
|
|
|
#if ((RTE_ETH_MII_REMAP == 0) && (RTE_ETH_MII_RXD3_DEF == 0))
|
|
#define RTE_ETH_MII_RXD3_PORT GPIOB
|
|
#define RTE_ETH_MII_RXD3_PIN 1
|
|
#elif ((RTE_ETH_MII_REMAP == 1) && (RTE_ETH_MII_RXD3_REMAP == 1))
|
|
#define RTE_ETH_MII_RXD3_PORT GPIOD
|
|
#define RTE_ETH_MII_RXD3_PIN 12
|
|
#else
|
|
#error "Invalid ETH_MII_RXD3 Pin Configuration!"
|
|
#endif
|
|
|
|
#if ((RTE_ETH_MII_REMAP == 0) && (RTE_ETH_MII_RX_DV_DEF == 0))
|
|
#define RTE_ETH_MII_RX_DV_PORT GPIOA
|
|
#define RTE_ETH_MII_RX_DV_PIN 7
|
|
#elif ((RTE_ETH_MII_REMAP == 1) && (RTE_ETH_MII_RX_DV_REMAP == 1))
|
|
#define RTE_ETH_MII_RX_DV_PORT GPIOD
|
|
#define RTE_ETH_MII_RX_DV_PIN 8
|
|
#else
|
|
#error "Invalid ETH_MII_RX_DV Pin Configuration!"
|
|
#endif
|
|
|
|
// <e> RMII (Reduced Media Independent Interface)
|
|
#define RTE_ETH_RMII 0
|
|
|
|
// <o> ETH_RMII_TXD0 Pin <0=>PB12
|
|
#define RTE_ETH_RMII_TXD0_PORT_ID 0
|
|
#if (RTE_ETH_RMII_TXD0_PORT_ID == 0)
|
|
#define RTE_ETH_RMII_TXD0_PORT GPIOB
|
|
#define RTE_ETH_RMII_TXD0_PIN 12
|
|
#else
|
|
#error "Invalid ETH_RMII_TXD0 Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_RMII_TXD1 Pin <0=>PB13
|
|
#define RTE_ETH_RMII_TXD1_PORT_ID 0
|
|
#if (RTE_ETH_RMII_TXD1_PORT_ID == 0)
|
|
#define RTE_ETH_RMII_TXD1_PORT GPIOB
|
|
#define RTE_ETH_RMII_TXD1_PIN 13
|
|
#else
|
|
#error "Invalid ETH_RMII_TXD1 Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_RMII_TX_EN Pin <0=>PB11
|
|
#define RTE_ETH_RMII_TX_EN_PORT_ID 0
|
|
#if (RTE_ETH_RMII_TX_EN_PORT_ID == 0)
|
|
#define RTE_ETH_RMII_TX_EN_PORT GPIOB
|
|
#define RTE_ETH_RMII_TX_EN_PIN 11
|
|
#else
|
|
#error "Invalid ETH_RMII_TX_EN Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_RMII_RXD0 Pin <0=>PC4
|
|
#define RTE_ETH_RMII_RXD0_DEF 0
|
|
|
|
// <o> ETH_RMII_RXD1 Pin <0=>PC5
|
|
#define RTE_ETH_RMII_RXD1_DEF 0
|
|
|
|
// <o> ETH_RMII_REF_CLK Pin <0=>PA1
|
|
#define RTE_ETH_RMII_REF_CLK_PORT_ID 0
|
|
#if (RTE_ETH_RMII_REF_CLK_PORT_ID == 0)
|
|
#define RTE_ETH_RMII_REF_CLK_PORT GPIOA
|
|
#define RTE_ETH_RMII_REF_CLK_PIN 1
|
|
#else
|
|
#error "Invalid ETH_RMII_REF_CLK Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_RMII_CRS_DV Pin <0=>PA7
|
|
#define RTE_ETH_RMII_CRS_DV_DEF 0
|
|
|
|
// <e> Ethernet MAC I/O remapping
|
|
// <i> Remap Ethernet pins
|
|
#define RTE_ETH_RMII_REMAP 0
|
|
// <o> ETH_RMII_RXD0 Pin <1=>PD9
|
|
#define RTE_ETH_RMII_RXD0_REMAP 1
|
|
|
|
// <o> ETH_RMII_RXD1 Pin <1=>PD10
|
|
#define RTE_ETH_RMII_RXD1_REMAP 1
|
|
|
|
// <o> ETH_RMII_CRS_DV Pin <1=>PD8
|
|
#define RTE_ETH_RMII_CRS_DV_REMAP 1
|
|
// </e>
|
|
|
|
#if ((RTE_ETH_RMII_REMAP == 0) && (RTE_ETH_RMII_RXD0_DEF == 0))
|
|
#define RTE_ETH_RMII_RXD0_PORT GPIOC
|
|
#define RTE_ETH_RMII_RXD0_PIN 4
|
|
#elif ((RTE_ETH_RMII_REMAP == 1) && (RTE_ETH_RMII_RXD0_REMAP == 1))
|
|
#define RTE_ETH_RMII_RXD0_PORT GPIOD
|
|
#define RTE_ETH_RMII_RXD0_PIN 9
|
|
#else
|
|
#error "Invalid ETH_RMII_RXD0 Pin Configuration!"
|
|
#endif
|
|
|
|
#if ((RTE_ETH_RMII_REMAP == 0) && (RTE_ETH_RMII_RXD1_DEF == 0))
|
|
#define RTE_ETH_RMII_RXD1_PORT GPIOC
|
|
#define RTE_ETH_RMII_RXD1_PIN 5
|
|
#elif ((RTE_ETH_RMII_REMAP == 1) && (RTE_ETH_RMII_RXD1_REMAP == 1))
|
|
#define RTE_ETH_RMII_RXD1_PORT GPIOD
|
|
#define RTE_ETH_RMII_RXD1_PIN 10
|
|
#else
|
|
#error "Invalid ETH_RMII_RXD1 Pin Configuration!"
|
|
#endif
|
|
|
|
#if ((RTE_ETH_RMII_REMAP == 0) && (RTE_ETH_RMII_CRS_DV_DEF == 0))
|
|
#define RTE_ETH_RMII_CRS_DV_PORT GPIOA
|
|
#define RTE_ETH_RMII_CRS_DV_PIN 7
|
|
#elif ((RTE_ETH_RMII_REMAP == 1) && (RTE_ETH_RMII_CRS_DV_REMAP == 1))
|
|
#define RTE_ETH_RMII_CRS_DV_PORT GPIOD
|
|
#define RTE_ETH_RMII_CRS_DV_PIN 8
|
|
#else
|
|
#error "Invalid ETH_RMII_CRS_DV Pin Configuration!"
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <h> Management Data Interface
|
|
// <o> ETH_MDC Pin <0=>PC1
|
|
#define RTE_ETH_MDI_MDC_PORT_ID 0
|
|
#if (RTE_ETH_MDI_MDC_PORT_ID == 0)
|
|
#define RTE_ETH_MDI_MDC_PORT GPIOC
|
|
#define RTE_ETH_MDI_MDC_PIN 1
|
|
#else
|
|
#error "Invalid ETH_MDC Pin Configuration!"
|
|
#endif
|
|
// <o> ETH_MDIO Pin <0=>PA2
|
|
#define RTE_ETH_MDI_MDIO_PORT_ID 0
|
|
#if (RTE_ETH_MDI_MDIO_PORT_ID == 0)
|
|
#define RTE_ETH_MDI_MDIO_PORT GPIOA
|
|
#define RTE_ETH_MDI_MDIO_PIN 2
|
|
#else
|
|
#error "Invalid ETH_MDIO Pin Configuration!"
|
|
#endif
|
|
// </h>
|
|
|
|
// <o> Reference 25MHz Clock generation on MCO pin <0=>Disabled <1=>Enabled
|
|
#define RTE_ETH_REF_CLOCK_ID 0
|
|
#if (RTE_ETH_REF_CLOCK_ID == 0)
|
|
#define RTE_ETH_REF_CLOCK 0
|
|
#elif (RTE_ETH_REF_CLOCK_ID == 1)
|
|
#define RTE_ETH_REF_CLOCK 1
|
|
#else
|
|
#error "Invalid MCO Ethernet Reference Clock Configuration!"
|
|
#endif
|
|
// </e>
|
|
|
|
|
|
// <e> USB Device Full-speed
|
|
// <i> Configuration settings for Driver_USBD0 in component ::Drivers:USB Device
|
|
#define RTE_USB_DEVICE 0
|
|
|
|
// <e> CON On/Off Pin
|
|
// <i> Configure Pin for driving D+ pull-up
|
|
// <i> GPIO Pxy (x = A..G, y = 0..15)
|
|
// <o1> Active State <0=>Low <1=>High
|
|
// <i> Selects Active State Logical Level
|
|
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
|
|
// <4=>GPIOE <5=>GPIOF <6=>GPIOG
|
|
// <i> Selects Port Name
|
|
// <o3> Bit <0-15>
|
|
// <i> Selects Port Bit
|
|
// </e>
|
|
#define RTE_USB_DEVICE_CON_PIN 1
|
|
#define RTE_USB_DEVICE_CON_ACTIVE 0
|
|
#define RTE_USB_DEVICE_CON_PORT GPIO_PORT(1)
|
|
#define RTE_USB_DEVICE_CON_BIT 14
|
|
|
|
// </e>
|
|
|
|
|
|
// <e> USB OTG Full-speed
|
|
#define RTE_USB_OTG_FS 0
|
|
|
|
// <e> Host [Driver_USBH0]
|
|
// <i> Configuration settings for Driver_USBH0 in component ::Drivers:USB Host
|
|
|
|
#define RTE_USB_OTG_FS_HOST 0
|
|
|
|
// <e> VBUS Power On/Off Pin
|
|
// <i> Configure Pin for driving VBUS
|
|
// <i> GPIO Pxy (x = A..G, y = 0..15)
|
|
// <o1> Active State <0=>Low <1=>High
|
|
// <i> Selects Active State Logical Level
|
|
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
|
|
// <4=>GPIOE <5=>GPIOF <6=>GPIOG
|
|
// <i> Selects Port Name
|
|
// <o3> Bit <0-15>
|
|
// <i> Selects Port Bit
|
|
// </e>
|
|
#define RTE_OTG_FS_VBUS_PIN 1
|
|
#define RTE_OTG_FS_VBUS_ACTIVE 0
|
|
#define RTE_OTG_FS_VBUS_PORT GPIO_PORT(2)
|
|
#define RTE_OTG_FS_VBUS_BIT 9
|
|
|
|
// <e> Overcurrent Detection Pin
|
|
// <i> Configure Pin for overcurrent detection
|
|
// <i> GPIO Pxy (x = A..G, y = 0..15)
|
|
// <o1> Active State <0=>Low <1=>High
|
|
// <i> Selects Active State Logical Level
|
|
// <o2> Port <0=>GPIOA <1=>GPIOB <2=>GPIOC <3=>GPIOD
|
|
// <4=>GPIOE <5=>GPIOF <6=>GPIOG
|
|
// <i> Selects Port Name
|
|
// <o3> Bit <0-15>
|
|
// <i> Selects Port Bit
|
|
// </e>
|
|
#define RTE_OTG_FS_OC_PIN 1
|
|
#define RTE_OTG_FS_OC_ACTIVE 0
|
|
#define RTE_OTG_FS_OC_PORT GPIO_PORT(4)
|
|
#define RTE_OTG_FS_OC_BIT 1
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
|
|
#endif /* __RTE_DEVICE_H */
|