#include "stm32f10x.h"

#define In_Floating 0x4
#define In_PullDown 0x8
#define In_PullUp 0x8
#define In_Analog 0x0
#define Out_Ppull 0x3
#define Out_OD 0x7
#define AltOut_Ppull 0xB
#define AltOut_OD 0xF

void MyGPIO_Init(GPIO_TypeDef * GPIO, char pin, char conf ){
int shift_pin;
//Start clock
if(GPIO == GPIOA){
RCC -> APB2ENR |= RCC_APB2ENR_IOPAEN;
}
else if(GPIO == GPIOB){
RCC -> APB2ENR |= RCC_APB2ENR_IOPBEN;
}
else if(GPIO == GPIOC){
RCC -> APB2ENR |= RCC_APB2ENR_IOPCEN;
}
else if(GPIO == GPIOD){
RCC -> APB2ENR |= RCC_APB2ENR_IOPDEN;
}
if(pin < 8){//CRL zone
shift_pin = pin*4;
GPIO -> CRL &= ~(0xF << shift_pin);
//PullUp and PullDown have the same conf number, so we need to change the ODR to diferenciate them both
if(conf == In_PullUp){
GPIO -> CRL |= ( In_PullUp << shift_pin);
GPIO -> ODR |= (1<<pin);
}
else if(conf == In_PullDown){
GPIO -> CRL |= ( In_PullDown << shift_pin);
GPIO -> ODR &= ~(1<<pin);
}
else{
GPIO -> CRL |= ( conf << shift_pin);
}
}
else{//CRH zone
shift_pin = (pin-8)*4;
GPIO -> CRH &= ~(0xF << shift_pin);
if(conf == In_PullUp){
GPIO -> CRH |= ( In_PullUp << shift_pin);
GPIO -> ODR |= (1<<pin);
}
else if(conf == In_PullDown){
GPIO -> CRH |= ( In_PullDown << shift_pin);
GPIO -> ODR &= ~(1<<pin);
}
else{
GPIO -> CRH |= ( conf << shift_pin);
}
}
}
int MyGPIO_Read(GPIO_TypeDef * GPIO, char GPIO_Pin){
if(GPIO -> IDR & (1 << GPIO_Pin)){
return 1;
}
else{
return 0;
}
}
void MyGPIO_Set(GPIO_TypeDef * GPIO, char GPIO_Pin){
GPIO -> BSRR = (1<<GPIO_Pin);//1 on set zone
}
void MyGPIO_Reset(GPIO_TypeDef * GPIO, char GPIO_Pin){
GPIO -> BSRR = (1<<(GPIO_Pin+16));//1 on reset zone
}
void MyGPIO_Toggle(GPIO_TypeDef * GPIO, char GPIO_Pin){
if((GPIO-> ODR & (1<<GPIO_Pin)) != 0){
GPIO -> BSRR = (1<<(GPIO_Pin+16));
}
else{
GPIO -> BSRR = (1<<GPIO_Pin);
}
}