#include "Driver_UART.h"
/*
void MyUart_Init(UartConfig config) {
  // Enable the clock for GPIO Port and USART
  RCC->APB2ENR |= RCC_APB2ENR_IOPAEN | RCC_APB2ENR_USART1EN;
  
  // Configure GPIO pins for USART TX/RX pins
  GPIOA->CRH |= GPIO_CRH_MODE9_1 | GPIO_CRH_CNF9_1 | GPIO_CRH_CNF10_0;
  
  // Configure the USART using the provided configuration values
  USART1->CR1 = config.USART_CR1;
  USART1->CR2 = config.USART_CR2;
  USART1->BRR = config.USART_BRR;
  USART1->CR3 = config.USART_CR3;
  
  // Enable the USART
  USART1->CR1 |= USART_CR1_UE;
}

void MyUART_SendByte() {
  // Wait for the USART TX buffer to be empty
  while(!(usart->SR & USART_SR_TXE));   

  // Send the byte of data
  usart->DR = data;
}

uint8_t MyUart_ReceiveByte(MyUART_Struct_TypeDef *usart) {
  // Wait for the USART RX buffer to be non-empty
  while(!(usart->SR & USART_SR_RXNE));
  
  // Read the received byte from the USART's data register (DR)
  uint8_t received_byte = usart->DR;
  
  // Return the received byte
  return received_byte;
}*/