/* Project L476_ats_blink for STM32L476 mounted on Nucleo board:
 * the user LED (mounted on pin PA-5) is flashed every second for 50 ms.
 * The time base is provided by Systick (1000 ticks per second).
 * The clock configuration is the default one (Sysclk = 80 MHz, derived from MSI and PLL).
 */

/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_ll_bus.h"
#include "stm32l4xx_ll_rcc.h"
#include "stm32l4xx_ll_system.h"
#include "stm32l4xx_ll_utils.h"
#include "stm32l4xx_ll_gpio.h"
// #if defined(USE_FULL_ASSERT)
// #include "stm32_assert.h"
// #endif /* USE_FULL_ASSERT */

#include "gpio.h"

// systick interrupt handler
//void SysTick_Handler()
//{
	//to be defined if systick interrupt is enabled.
//}

void     SystemClock_Config(void);

int main(void)
{
/* Configure the system clock */
SystemClock_Config();

// config GPIO
GPIO_init();

// init systick timer (tick period at 1 ms)
LL_Init1msTick( SystemCoreClock );

while (1)  {
	if	( BLUE_BUTTON() )
		LED_GREEN(1);
	else {
		LED_GREEN(0);
		LL_mDelay(950);
		LED_GREEN(1);
		LL_mDelay(50);
		}
	}
}

/**
  * @brief  System Clock Configuration
  *         The system Clock is configured as follows :
  *            System Clock source            = PLL (MSI)
  *            SYSCLK(Hz)                     = 80000000
  *            HCLK(Hz)                       = 80000000
  *            AHB Prescaler                  = 1
  *            APB1 Prescaler                 = 1
  *            APB2 Prescaler                 = 1
  *            MSI Frequency(Hz)              = 4000000
  *            PLL_M                          = 1
  *            PLL_N                          = 40
  *            PLL_R                          = 2
  *            Flash Latency(WS)              = 4
  * @param  None
  * @retval None
  */
void SystemClock_Config(void) {
/* MSI configuration and activation */
LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
LL_RCC_MSI_Enable();
while	(LL_RCC_MSI_IsReady() != 1)
	{ };
  
/* Main PLL configuration and activation */
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
LL_RCC_PLL_Enable();
LL_RCC_PLL_EnableDomain_SYS();
while(LL_RCC_PLL_IsReady() != 1)
	{ };
  
/* Sysclk activation on the main PLL */
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
	{ };
  
/* Set APB1 & APB2 prescaler*/
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);

/* Update the global variable called SystemCoreClock */
SystemCoreClockUpdate();
}