Merge branch 'master' of https://git.etud.insa-toulouse.fr/bourlot/LoPoSo

PlaygroundYoupi/.metadata/.plugins/org.eclipse.cdt.ui/RealOne.build.log

@@ -1,10 +1,10 @@
-09:25:41 **** Incremental Build of configuration Debug for project RealOne ****
+10:09:39 **** Incremental Build of configuration Debug for project RealOne ****
 make -j8 all 
 arm-none-eabi-size   RealOne.elf 
    text	   data	    bss	    dec	    hex	filename
-   3632	     24	   1576	   5232	   1470	RealOne.elf
+   3748	     20	   1572	   5340	   14dc	RealOne.elf
 Finished building: default.size.stdout
  
 
-09:25:41 Build Finished. 0 errors, 0 warnings. (took 325ms)
+10:09:39 Build Finished. 0 errors, 0 warnings. (took 338ms)
 

PlaygroundYoupi/.metadata/.plugins/org.eclipse.cdt.ui/global-build.log

@@ -154,3 +154,424 @@ arm-none-eabi-size   RealOne.elf
    3632	     24	   1576	   5232	   1470	RealOne.elf
 Finished building: default.size.stdout
  
+09:28:07 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 '-DHSE_VALUE=8000000' '-DMSI_VALUE=4000000' '-DLSI_VALUE=32000' '-DHSE_STARTUP_TIMEOUT=100' '-DHSI_VALUE=16000000' -DDEBUG '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DDATA_CACHE_ENABLE=1' -DUSE_HAL_DRIVER '-DVDD_VALUE=3300' '-DINSTRUCTION_CACHE_ENABLE=1' '-DEXTERNALSAI2_CLOCK_VALUE=2097000' -DSTM32L476xx -DUSE_FULL_LL_DRIVER '-DEXTERNALSAI1_CLOCK_VALUE=2097000' '-DPREFETCH_ENABLE=0' -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:183:0: warning: "VDD_VALUE" redefined
+ #define  VDD_VALUE       3300U /*!< Value of VDD in mv */
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:186:0: warning: "PREFETCH_ENABLE" redefined
+ #define  PREFETCH_ENABLE              0U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:187:0: warning: "INSTRUCTION_CACHE_ENABLE" redefined
+ #define  INSTRUCTION_CACHE_ENABLE     1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:188:0: warning: "DATA_CACHE_ENABLE" redefined
+ #define  DATA_CACHE_ENABLE            1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+arm-none-eabi-gcc -o "RealOne.elf" @"objects.list"   -mcpu=cortex-m4 -T"C:\Users\camer\Desktop\LoPoSo\RealOne\STM32L476RGTX_FLASH.ld" --specs=nosys.specs -Wl,-Map="RealOne.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
+Finished building target: RealOne.elf
+ 
+arm-none-eabi-objdump -h -S  RealOne.elf  > "RealOne.list"
+arm-none-eabi-objcopy  -O binary  RealOne.elf  "RealOne.bin"
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3820	     20	   1572	   5412	   1524	RealOne.elf
+Finished building: default.size.stdout
+ 
+Finished building: RealOne.bin
+Finished building: RealOne.list
+ 
+ 
+09:30:04 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3820	     20	   1572	   5412	   1524	RealOne.elf
+Finished building: default.size.stdout
+ 
+09:33:28 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 '-DHSE_VALUE=8000000' '-DMSI_VALUE=4000000' '-DLSI_VALUE=32000' '-DHSE_STARTUP_TIMEOUT=100' '-DHSI_VALUE=16000000' -DDEBUG '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DDATA_CACHE_ENABLE=1' -DUSE_HAL_DRIVER '-DVDD_VALUE=3300' '-DINSTRUCTION_CACHE_ENABLE=1' '-DEXTERNALSAI2_CLOCK_VALUE=2097000' -DSTM32L476xx -DUSE_FULL_LL_DRIVER '-DEXTERNALSAI1_CLOCK_VALUE=2097000' '-DPREFETCH_ENABLE=0' -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:183:0: warning: "VDD_VALUE" redefined
+ #define  VDD_VALUE       3300U /*!< Value of VDD in mv */
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:186:0: warning: "PREFETCH_ENABLE" redefined
+ #define  PREFETCH_ENABLE              0U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:187:0: warning: "INSTRUCTION_CACHE_ENABLE" redefined
+ #define  INSTRUCTION_CACHE_ENABLE     1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:188:0: warning: "DATA_CACHE_ENABLE" redefined
+ #define  DATA_CACHE_ENABLE            1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+../Core/Src/main.c: In function 'main':
+../Core/Src/main.c:215:1: error: expected declaration or statement at end of input
+ }
+ ^
+At top level:
+../Core/Src/main.c:172:6: warning: 'SystemClock_Config_80M' defined but not used [-Wunused-function]
+ void SystemClock_Config_80M(void)
+      ^~~~~~~~~~~~~~~~~~~~~~
+../Core/Src/main.c:107:6: warning: 'SystemClock_Config_24M_LSE' defined but not used [-Wunused-function]
+ void SystemClock_Config_24M_LSE(void)
+      ^~~~~~~~~~~~~~~~~~~~~~~~~~
+make: *** [Core/Src/subdir.mk:38: Core/Src/main.o] Error 1
+"make -j8 all" terminated with exit code 2. Build might be incomplete.
+09:35:25 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 '-DHSE_VALUE=8000000' '-DMSI_VALUE=4000000' '-DLSI_VALUE=32000' '-DHSE_STARTUP_TIMEOUT=100' '-DHSI_VALUE=16000000' -DDEBUG '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DDATA_CACHE_ENABLE=1' -DUSE_HAL_DRIVER '-DVDD_VALUE=3300' '-DINSTRUCTION_CACHE_ENABLE=1' '-DEXTERNALSAI2_CLOCK_VALUE=2097000' -DSTM32L476xx -DUSE_FULL_LL_DRIVER '-DEXTERNALSAI1_CLOCK_VALUE=2097000' '-DPREFETCH_ENABLE=0' -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:183:0: warning: "VDD_VALUE" redefined
+ #define  VDD_VALUE       3300U /*!< Value of VDD in mv */
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:186:0: warning: "PREFETCH_ENABLE" redefined
+ #define  PREFETCH_ENABLE              0U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:187:0: warning: "INSTRUCTION_CACHE_ENABLE" redefined
+ #define  INSTRUCTION_CACHE_ENABLE     1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:188:0: warning: "DATA_CACHE_ENABLE" redefined
+ #define  DATA_CACHE_ENABLE            1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+../Core/Src/main.c: In function 'main':
+../Core/Src/main.c:215:1: error: expected declaration or statement at end of input
+ }
+ ^
+At top level:
+../Core/Src/main.c:172:6: warning: 'SystemClock_Config_80M' defined but not used [-Wunused-function]
+ void SystemClock_Config_80M(void)
+      ^~~~~~~~~~~~~~~~~~~~~~
+../Core/Src/main.c:107:6: warning: 'SystemClock_Config_24M_LSE' defined but not used [-Wunused-function]
+ void SystemClock_Config_24M_LSE(void)
+      ^~~~~~~~~~~~~~~~~~~~~~~~~~
+make: *** [Core/Src/subdir.mk:38: Core/Src/main.o] Error 1
+"make -j8 all" terminated with exit code 2. Build might be incomplete.
+09:39:04 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 '-DHSE_VALUE=8000000' '-DMSI_VALUE=4000000' '-DLSI_VALUE=32000' '-DHSE_STARTUP_TIMEOUT=100' '-DHSI_VALUE=16000000' -DDEBUG '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DDATA_CACHE_ENABLE=1' -DUSE_HAL_DRIVER '-DVDD_VALUE=3300' '-DINSTRUCTION_CACHE_ENABLE=1' '-DEXTERNALSAI2_CLOCK_VALUE=2097000' -DSTM32L476xx -DUSE_FULL_LL_DRIVER '-DEXTERNALSAI1_CLOCK_VALUE=2097000' '-DPREFETCH_ENABLE=0' -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:183:0: warning: "VDD_VALUE" redefined
+ #define  VDD_VALUE       3300U /*!< Value of VDD in mv */
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:186:0: warning: "PREFETCH_ENABLE" redefined
+ #define  PREFETCH_ENABLE              0U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:187:0: warning: "INSTRUCTION_CACHE_ENABLE" redefined
+ #define  INSTRUCTION_CACHE_ENABLE     1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:188:0: warning: "DATA_CACHE_ENABLE" redefined
+ #define  DATA_CACHE_ENABLE            1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+arm-none-eabi-gcc -o "RealOne.elf" @"objects.list"   -mcpu=cortex-m4 -T"C:\Users\camer\Desktop\LoPoSo\RealOne\STM32L476RGTX_FLASH.ld" --specs=nosys.specs -Wl,-Map="RealOne.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
+Finished building target: RealOne.elf
+ 
+arm-none-eabi-objdump -h -S  RealOne.elf  > "RealOne.list"
+arm-none-eabi-objcopy  -O binary  RealOne.elf  "RealOne.bin"
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3780	     20	   1572	   5372	   14fc	RealOne.elf
+Finished building: default.size.stdout
+ 
+Finished building: RealOne.bin
+ 
+Finished building: RealOne.list
+ 
+09:39:09 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3780	     20	   1572	   5372	   14fc	RealOne.elf
+Finished building: default.size.stdout
+ 
+09:44:36 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 '-DHSE_VALUE=8000000' '-DMSI_VALUE=4000000' '-DLSI_VALUE=32000' '-DHSE_STARTUP_TIMEOUT=100' '-DHSI_VALUE=16000000' -DDEBUG '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DDATA_CACHE_ENABLE=1' -DUSE_HAL_DRIVER '-DVDD_VALUE=3300' '-DINSTRUCTION_CACHE_ENABLE=1' '-DEXTERNALSAI2_CLOCK_VALUE=2097000' -DSTM32L476xx -DUSE_FULL_LL_DRIVER '-DEXTERNALSAI1_CLOCK_VALUE=2097000' '-DPREFETCH_ENABLE=0' -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:183:0: warning: "VDD_VALUE" redefined
+ #define  VDD_VALUE       3300U /*!< Value of VDD in mv */
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:186:0: warning: "PREFETCH_ENABLE" redefined
+ #define  PREFETCH_ENABLE              0U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:187:0: warning: "INSTRUCTION_CACHE_ENABLE" redefined
+ #define  INSTRUCTION_CACHE_ENABLE     1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:188:0: warning: "DATA_CACHE_ENABLE" redefined
+ #define  DATA_CACHE_ENABLE            1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+arm-none-eabi-gcc -o "RealOne.elf" @"objects.list"   -mcpu=cortex-m4 -T"C:\Users\camer\Desktop\LoPoSo\RealOne\STM32L476RGTX_FLASH.ld" --specs=nosys.specs -Wl,-Map="RealOne.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
+Finished building target: RealOne.elf
+ 
+arm-none-eabi-objdump -h -S  RealOne.elf  > "RealOne.list"
+arm-none-eabi-objcopy  -O binary  RealOne.elf  "RealOne.bin"
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3780	     20	   1572	   5372	   14fc	RealOne.elf
+Finished building: default.size.stdout
+ 
+Finished building: RealOne.bin
+Finished building: RealOne.list
+ 
+ 
+09:44:41 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3780	     20	   1572	   5372	   14fc	RealOne.elf
+Finished building: default.size.stdout
+ 
+09:47:38 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3780	     20	   1572	   5372	   14fc	RealOne.elf
+Finished building: default.size.stdout
+ 
+09:49:56 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 '-DHSE_VALUE=8000000' '-DMSI_VALUE=4000000' '-DLSI_VALUE=32000' '-DHSE_STARTUP_TIMEOUT=100' '-DHSI_VALUE=16000000' -DDEBUG '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DDATA_CACHE_ENABLE=1' -DUSE_HAL_DRIVER '-DVDD_VALUE=3300' '-DINSTRUCTION_CACHE_ENABLE=1' '-DEXTERNALSAI2_CLOCK_VALUE=2097000' -DSTM32L476xx -DUSE_FULL_LL_DRIVER '-DEXTERNALSAI1_CLOCK_VALUE=2097000' '-DPREFETCH_ENABLE=0' -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:183:0: warning: "VDD_VALUE" redefined
+ #define  VDD_VALUE       3300U /*!< Value of VDD in mv */
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:186:0: warning: "PREFETCH_ENABLE" redefined
+ #define  PREFETCH_ENABLE              0U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:187:0: warning: "INSTRUCTION_CACHE_ENABLE" redefined
+ #define  INSTRUCTION_CACHE_ENABLE     1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:188:0: warning: "DATA_CACHE_ENABLE" redefined
+ #define  DATA_CACHE_ENABLE            1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+arm-none-eabi-gcc -o "RealOne.elf" @"objects.list"   -mcpu=cortex-m4 -T"C:\Users\camer\Desktop\LoPoSo\RealOne\STM32L476RGTX_FLASH.ld" --specs=nosys.specs -Wl,-Map="RealOne.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
+Finished building target: RealOne.elf
+ 
+arm-none-eabi-objdump -h -S  RealOne.elf  > "RealOne.list"
+arm-none-eabi-objcopy  -O binary  RealOne.elf  "RealOne.bin"
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3796	     20	   1572	   5388	   150c	RealOne.elf
+Finished building: default.size.stdout
+ 
+Finished building: RealOne.bin
+Finished building: RealOne.list
+ 
+ 
+09:51:43 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3796	     20	   1572	   5388	   150c	RealOne.elf
+Finished building: default.size.stdout
+ 
+09:52:52 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3796	     20	   1572	   5388	   150c	RealOne.elf
+Finished building: default.size.stdout
+ 
+09:56:36 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 '-DHSE_VALUE=8000000' '-DMSI_VALUE=4000000' '-DLSI_VALUE=32000' '-DHSE_STARTUP_TIMEOUT=100' '-DHSI_VALUE=16000000' -DDEBUG '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DDATA_CACHE_ENABLE=1' -DUSE_HAL_DRIVER '-DVDD_VALUE=3300' '-DINSTRUCTION_CACHE_ENABLE=1' '-DEXTERNALSAI2_CLOCK_VALUE=2097000' -DSTM32L476xx -DUSE_FULL_LL_DRIVER '-DEXTERNALSAI1_CLOCK_VALUE=2097000' '-DPREFETCH_ENABLE=0' -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:183:0: warning: "VDD_VALUE" redefined
+ #define  VDD_VALUE       3300U /*!< Value of VDD in mv */
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:186:0: warning: "PREFETCH_ENABLE" redefined
+ #define  PREFETCH_ENABLE              0U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:187:0: warning: "INSTRUCTION_CACHE_ENABLE" redefined
+ #define  INSTRUCTION_CACHE_ENABLE     1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:188:0: warning: "DATA_CACHE_ENABLE" redefined
+ #define  DATA_CACHE_ENABLE            1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+arm-none-eabi-gcc -o "RealOne.elf" @"objects.list"   -mcpu=cortex-m4 -T"C:\Users\camer\Desktop\LoPoSo\RealOne\STM32L476RGTX_FLASH.ld" --specs=nosys.specs -Wl,-Map="RealOne.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
+Finished building target: RealOne.elf
+ 
+arm-none-eabi-objdump -h -S  RealOne.elf  > "RealOne.list"
+arm-none-eabi-objcopy  -O binary  RealOne.elf  "RealOne.bin"
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3756	     20	   1572	   5348	   14e4	RealOne.elf
+Finished building: default.size.stdout
+ 
+Finished building: RealOne.bin
+Finished building: RealOne.list
+ 
+ 
+09:57:22 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3756	     20	   1572	   5348	   14e4	RealOne.elf
+Finished building: default.size.stdout
+ 
+10:08:48 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 '-DHSE_VALUE=8000000' '-DMSI_VALUE=4000000' '-DLSI_VALUE=32000' '-DHSE_STARTUP_TIMEOUT=100' '-DHSI_VALUE=16000000' -DDEBUG '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DDATA_CACHE_ENABLE=1' -DUSE_HAL_DRIVER '-DVDD_VALUE=3300' '-DINSTRUCTION_CACHE_ENABLE=1' '-DEXTERNALSAI2_CLOCK_VALUE=2097000' -DSTM32L476xx -DUSE_FULL_LL_DRIVER '-DEXTERNALSAI1_CLOCK_VALUE=2097000' '-DPREFETCH_ENABLE=0' -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:183:0: warning: "VDD_VALUE" redefined
+ #define  VDD_VALUE       3300U /*!< Value of VDD in mv */
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:186:0: warning: "PREFETCH_ENABLE" redefined
+ #define  PREFETCH_ENABLE              0U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:187:0: warning: "INSTRUCTION_CACHE_ENABLE" redefined
+ #define  INSTRUCTION_CACHE_ENABLE     1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+In file included from ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h:30:0,
+                 from ../Core/Inc/main.h:31,
+                 from ../Core/Src/main.c:8:
+../Core/Inc/stm32l4xx_hal_conf.h:188:0: warning: "DATA_CACHE_ENABLE" redefined
+ #define  DATA_CACHE_ENABLE            1U
+ 
+<command-line>:0:0: note: this is the location of the previous definition
+arm-none-eabi-gcc -o "RealOne.elf" @"objects.list"   -mcpu=cortex-m4 -T"C:\Users\camer\Desktop\LoPoSo\RealOne\STM32L476RGTX_FLASH.ld" --specs=nosys.specs -Wl,-Map="RealOne.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
+Finished building target: RealOne.elf
+ 
+arm-none-eabi-objdump -h -S  RealOne.elf  > "RealOne.list"
+arm-none-eabi-objcopy  -O binary  RealOne.elf  "RealOne.bin"
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3748	     20	   1572	   5340	   14dc	RealOne.elf
+Finished building: default.size.stdout
+ 
+Finished building: RealOne.bin
+Finished building: RealOne.list
+ 
+ 
+10:08:57 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3748	     20	   1572	   5340	   14dc	RealOne.elf
+Finished building: default.size.stdout
+ 
+10:09:39 **** Incremental Build of configuration Debug for project RealOne ****
+make -j8 all 
+arm-none-eabi-size   RealOne.elf 
+   text	   data	    bss	    dec	    hex	filename
+   3748	     20	   1572	   5340	   14dc	RealOne.elf
+Finished building: default.size.stdout
+ 

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.resources/.history/1a/d055de90af28001b1d0af99b6389052e

@@ -0,0 +1,217 @@
+/* Project L476_ats_blink for STM32L476 mounted on Nucleo board:
+ * the user LED (mounted on pin PA-5) is flashed every second for 50 ms.
+ * The time base is provided by Systick (1000 ticks per second).
+ * The clock configuration is the default one (Sysclk = 80 MHz, derived from MSI and PLL).
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+// #if defined(USE_FULL_ASSERT)
+// #include "stm32_assert.h"
+// #endif /* USE_FULL_ASSERT */
+
+#include "gpio.h"
+
+// systick interrupt handler
+volatile uint32_t msTicks = 0;
+volatile uint8_t expe = 0;
+volatile uint8_t blue_mode = 0;
+
+void SysTick_Handler()
+{
+  if	( BLUE_BUTTON() ){
+			blue_mode = 1 ;
+  }
+
+  msTicks++;                                                /* See startup file startup_LPC17xx.s for SysTick vector */
+  if (msTicks == 5 * expe){
+	  LED_GREEN(0);
+  }else if(msTicks >= 200){
+	  msTicks = 0;
+	  LED_GREEN(1);
+  }
+ if(expe == 2){
+	 CLK_TOGGLE();
+ }
+}
+
+
+
+
+int main(void)
+{
+	if (RCC->BDCR & RCC_BDCR_LSEON) {
+			LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+			LL_PWR_EnableBkUpAccess();
+
+			//expe = register RTC
+			expe = RTC->BKP0R;
+			if (expe == 0){
+				expe = 1;
+				RTC->BKP0R = expe;
+			}else if (expe != 0 && BLUE_BUTTON()){
+				expe ++;
+				RTC->BKP0R = expe;
+			}
+	}else{
+		SystemClock_Config_24M_LSE();
+		expe = 1;
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+		RTC->BKP0R = expe;
+	}
+	LL_PWR_DisableBkUpAccess();
+	switch(expe){
+			case 1:
+				/* Configure the system clock */
+				SystemClock_Config_80M();
+				break;
+			case 2:
+				/* Configure the system clock */
+				SystemClock_Config_24M_LSE();
+				break;
+			}
+
+
+
+
+// config GPIO
+GPIO_init();
+
+// init systick timer (tick period at 1 ms)
+LL_Init1msTick( SystemCoreClock );
+LL_SYSTICK_EnableIT();
+
+//Setup Sleep mode
+LL_LPM_EnableSleep();
+//LL_LPM_EnableSleepOnExit();
+
+while (1)  {
+	if (blue_mode){
+		switch(expe){
+					case 1:
+						__WFI();
+						break;
+					case 2:
+						LL_RCC_MSI_EnablePLLMode();
+						break;
+					}
+
+		}
+	}
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  * 24Mhz + RTC + LSE
+  */
+void SystemClock_Config_24M_LSE(void)
+{
+  LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+  LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+  while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)
+  {
+  }
+  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+  LL_RCC_MSI_Enable();
+
+   /* Wait till MSI is ready */
+  while(LL_RCC_MSI_IsReady() != 1)
+  {
+
+  }
+
+  LL_PWR_EnableBkUpAccess();
+  LL_RCC_ForceBackupDomainReset();
+  LL_RCC_ReleaseBackupDomainReset();
+  LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_LOW);
+
+  LL_RCC_MSI_EnableRangeSelection();
+  LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+  LL_RCC_MSI_SetCalibTrimming(0);
+//  LL_RCC_MSI_EnablePLLMode();
+
+  LL_RCC_LSE_Enable();
+
+      /* Wait till LSE is ready */
+     while(LL_RCC_LSE_IsReady() != 1)
+     {
+
+     }
+    LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
+    LL_RCC_EnableRTC();
+
+  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 24, LL_RCC_PLLR_DIV_4);
+  LL_RCC_PLL_EnableDomain_SYS();
+  LL_RCC_PLL_Enable();
+
+   /* Wait till PLL is ready */
+  while(LL_RCC_PLL_IsReady() != 1)
+  {
+
+  }
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+   /* Wait till System clock is ready */
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+  {
+
+  }
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+  LL_SetSystemCoreClock(24000000);
+
+   /* Update the time base */
+  if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+  {
+//    Error_Handler();
+  }
+}
+
+
+void SystemClock_Config_80M(void)
+{
+  LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
+  while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_4)
+  {
+  }
+  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+  LL_RCC_MSI_Enable();
+
+   /* Wait till MSI is ready */
+  while(LL_RCC_MSI_IsReady() != 1)
+  {
+
+  }
+  LL_RCC_MSI_EnableRangeSelection();
+  LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+  LL_RCC_MSI_SetCalibTrimming(0);
+  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
+  LL_RCC_PLL_EnableDomain_SYS();
+  LL_RCC_PLL_Enable();
+
+   /* Wait till PLL is ready */
+  while(LL_RCC_PLL_IsReady() != 1)
+  {
+
+  }
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+   /* Wait till System clock is ready */
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+  {
+
+  }
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+  LL_SetSystemCoreClock(80000000);
+
+   /* Update the time base */
+  if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+  {
+//    Error_Handler();
+  }
+}

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.resources/.history/3b/c0a8101fb128001b1d0af99b6389052e

@@ -0,0 +1,215 @@
+/* Project L476_ats_blink for STM32L476 mounted on Nucleo board:
+ * the user LED (mounted on pin PA-5) is flashed every second for 50 ms.
+ * The time base is provided by Systick (1000 ticks per second).
+ * The clock configuration is the default one (Sysclk = 80 MHz, derived from MSI and PLL).
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+// #if defined(USE_FULL_ASSERT)
+// #include "stm32_assert.h"
+// #endif /* USE_FULL_ASSERT */
+
+#include "gpio.h"
+
+// systick interrupt handler
+volatile uint32_t msTicks = 0;
+volatile uint8_t expe = 0;
+volatile uint8_t blue_mode = 0;
+
+void SysTick_Handler()
+{
+	if	( BLUE_BUTTON() ){
+		blue_mode = 1 ;
+	}
+
+	msTicks++;                                                /* See startup file startup_LPC17xx.s for SysTick vector */
+	if (msTicks == 5 * expe){
+		LED_GREEN(0);
+	}else if(msTicks >= 200){
+		msTicks = 0;
+		LED_GREEN(1);
+	}
+	if(expe == 2){
+		CLK_TOGGLE();
+	}
+}
+
+
+
+
+int main(void)
+{
+	if (RCC->BDCR & RCC_BDCR_LSEON) {
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+
+		//expe = register RTC
+		expe = RTC->BKP0R;
+
+		if (BLUE_BUTTON()){
+			expe ++;
+			RTC->BKP0R = expe;
+		}
+	}else{
+		SystemClock_Config_24M_LSE();
+		expe = 1;
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+		RTC->BKP0R = expe;
+	}
+	LL_PWR_DisableBkUpAccess();
+	switch(expe){
+	case 1:
+		/* Configure the system clock */
+		SystemClock_Config_80M();
+		break;
+	case 2:
+		/* Configure the system clock */
+		SystemClock_Config_24M_LSE();
+		break;
+	}
+
+
+
+
+	// config GPIO
+	GPIO_init();
+
+	// init systick timer (tick period at 1 ms)
+	LL_Init1msTick( SystemCoreClock );
+	LL_SYSTICK_EnableIT();
+
+	//Setup Sleep mode
+	LL_LPM_EnableSleep();
+	//LL_LPM_EnableSleepOnExit();
+
+	while (1)  {
+		if (blue_mode){
+			switch(expe){
+			case 1:
+				__WFI();
+				break;
+			case 2:
+				LL_RCC_MSI_EnablePLLMode();
+				break;
+			}
+
+		}
+	}
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ * 24Mhz + RTC + LSE
+ */
+void SystemClock_Config_24M_LSE(void)
+{
+	LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)
+	{
+	}
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_RCC_MSI_Enable();
+
+	/* Wait till MSI is ready */
+	while(LL_RCC_MSI_IsReady() != 1)
+	{
+
+	}
+
+	LL_PWR_EnableBkUpAccess();
+	LL_RCC_ForceBackupDomainReset();
+	LL_RCC_ReleaseBackupDomainReset();
+	LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_LOW);
+
+	LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetCalibTrimming(0);
+	//  LL_RCC_MSI_EnablePLLMode();
+
+	LL_RCC_LSE_Enable();
+
+	/* Wait till LSE is ready */
+	while(LL_RCC_LSE_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
+	LL_RCC_EnableRTC();
+
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 24, LL_RCC_PLLR_DIV_4);
+	LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_Enable();
+
+	/* Wait till PLL is ready */
+	while(LL_RCC_PLL_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+	/* Wait till System clock is ready */
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	{
+
+	}
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_SetSystemCoreClock(24000000);
+
+	/* Update the time base */
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	{
+		//    Error_Handler();
+	}
+}
+
+
+void SystemClock_Config_80M(void)
+{
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_4)
+	{
+	}
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_RCC_MSI_Enable();
+
+	/* Wait till MSI is ready */
+	while(LL_RCC_MSI_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetCalibTrimming(0);
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
+	LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_Enable();
+
+	/* Wait till PLL is ready */
+	while(LL_RCC_PLL_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+	/* Wait till System clock is ready */
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	{
+
+	}
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_SetSystemCoreClock(80000000);
+
+	/* Update the time base */
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	{
+		//    Error_Handler();
+	}
+}

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.resources/.history/af/40857dccb228001b1d0af99b6389052e

@@ -0,0 +1,218 @@
+/* Project L476_ats_blink for STM32L476 mounted on Nucleo board:
+ * the user LED (mounted on pin PA-5) is flashed every second for 50 ms.
+ * The time base is provided by Systick (1000 ticks per second).
+ * The clock configuration is the default one (Sysclk = 80 MHz, derived from MSI and PLL).
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+// #if defined(USE_FULL_ASSERT)
+// #include "stm32_assert.h"
+// #endif /* USE_FULL_ASSERT */
+
+#include "gpio.h"
+
+// systick interrupt handler
+volatile uint32_t msTicks = 0;
+volatile uint8_t expe = 0;
+volatile uint8_t blue_mode = 0;
+
+void SysTick_Handler()
+{
+	if	( BLUE_BUTTON() ){
+		blue_mode = 1 ;
+	}
+
+	msTicks++;                                                /* See startup file startup_LPC17xx.s for SysTick vector */
+	if (msTicks == 5 * expe){
+		LED_GREEN(0);
+	}else if(msTicks >= 200){
+		msTicks = 0;
+		LED_GREEN(1);
+	}
+	if(expe == 2){
+		CLK_TOGGLE();
+	}
+}
+
+
+
+
+int main(void)
+{
+
+
+	// config GPIO
+	GPIO_init();
+
+	if (RCC->BDCR & RCC_BDCR_LSEON) {
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+
+		//expe = register RTC
+		expe = RTC->BKP0R;
+
+		if (BLUE_BUTTON()){
+
+			expe ++;
+
+			if (expe > 2) expe = 1;
+			RTC->BKP0R = expe;
+		}
+	}else{
+		SystemClock_Config_24M_LSE();
+		expe = 1;
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+		RTC->BKP0R = expe;
+	}
+	LL_PWR_DisableBkUpAccess();
+	switch(expe){
+	case 1:
+		/* Configure the system clock */
+		SystemClock_Config_80M();
+		break;
+	case 2:
+		/* Configure the system clock */
+		SystemClock_Config_24M_LSE();
+		break;
+	}
+
+
+	// init systick timer (tick period at 1 ms)
+	LL_Init1msTick( SystemCoreClock );
+	LL_SYSTICK_EnableIT();
+
+	//Setup Sleep mode
+	LL_LPM_EnableSleep();
+	//LL_LPM_EnableSleepOnExit();
+
+	while (1)  {
+		if (blue_mode){
+			switch(expe){
+			case 1:
+				__WFI();
+				break;
+			case 2:
+				LL_RCC_MSI_EnablePLLMode();
+				break;
+			}
+
+		}
+	}
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ * 24Mhz + RTC + LSE
+ */
+void SystemClock_Config_24M_LSE(void)
+{
+	LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)
+	{
+	}
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_RCC_MSI_Enable();
+
+	/* Wait till MSI is ready */
+	while(LL_RCC_MSI_IsReady() != 1)
+	{
+
+	}
+
+	LL_PWR_EnableBkUpAccess();
+	LL_RCC_ForceBackupDomainReset();
+	LL_RCC_ReleaseBackupDomainReset();
+	LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_LOW);
+
+	LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetCalibTrimming(0);
+	//  LL_RCC_MSI_EnablePLLMode();
+
+	LL_RCC_LSE_Enable();
+
+	/* Wait till LSE is ready */
+	while(LL_RCC_LSE_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
+	LL_RCC_EnableRTC();
+
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 24, LL_RCC_PLLR_DIV_4);
+	LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_Enable();
+
+	/* Wait till PLL is ready */
+	while(LL_RCC_PLL_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+	/* Wait till System clock is ready */
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	{
+
+	}
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_SetSystemCoreClock(24000000);
+
+	/* Update the time base */
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	{
+		//    Error_Handler();
+	}
+}
+
+
+void SystemClock_Config_80M(void)
+{
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_4)
+	{
+	}
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_RCC_MSI_Enable();
+
+	/* Wait till MSI is ready */
+	while(LL_RCC_MSI_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetCalibTrimming(0);
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
+	LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_Enable();
+
+	/* Wait till PLL is ready */
+	while(LL_RCC_PLL_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+	/* Wait till System clock is ready */
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	{
+
+	}
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_SetSystemCoreClock(80000000);
+
+	/* Update the time base */
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	{
+		//    Error_Handler();
+	}
+}

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.resources/.history/b/d024d9ddb128001b1d0af99b6389052e

@@ -0,0 +1,215 @@
+/* Project L476_ats_blink for STM32L476 mounted on Nucleo board:
+ * the user LED (mounted on pin PA-5) is flashed every second for 50 ms.
+ * The time base is provided by Systick (1000 ticks per second).
+ * The clock configuration is the default one (Sysclk = 80 MHz, derived from MSI and PLL).
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+// #if defined(USE_FULL_ASSERT)
+// #include "stm32_assert.h"
+// #endif /* USE_FULL_ASSERT */
+
+#include "gpio.h"
+
+// systick interrupt handler
+volatile uint32_t msTicks = 0;
+volatile uint8_t expe = 0;
+volatile uint8_t blue_mode = 0;
+
+void SysTick_Handler()
+{
+	if	( BLUE_BUTTON() ){
+		blue_mode = 1 ;
+	}
+
+	msTicks++;                                                /* See startup file startup_LPC17xx.s for SysTick vector */
+	if (msTicks == 5 * expe){
+		LED_GREEN(0);
+	}else if(msTicks >= 200){
+		msTicks = 0;
+		LED_GREEN(1);
+	}
+	if(expe == 2){
+		CLK_TOGGLE();
+	}
+}
+
+
+
+
+int main(void)
+{
+
+
+	// config GPIO
+	GPIO_init();
+
+	if (RCC->BDCR & RCC_BDCR_LSEON) {
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+
+		//expe = register RTC
+		expe = RTC->BKP0R;
+
+		if (BLUE_BUTTON()){
+			expe ++;
+			RTC->BKP0R = expe;
+		}
+	}else{
+		SystemClock_Config_24M_LSE();
+		expe = 1;
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+		RTC->BKP0R = expe;
+	}
+	LL_PWR_DisableBkUpAccess();
+	switch(expe){
+	case 1:
+		/* Configure the system clock */
+		SystemClock_Config_80M();
+		break;
+	case 2:
+		/* Configure the system clock */
+		SystemClock_Config_24M_LSE();
+		break;
+	}
+
+
+	// init systick timer (tick period at 1 ms)
+	LL_Init1msTick( SystemCoreClock );
+	LL_SYSTICK_EnableIT();
+
+	//Setup Sleep mode
+	LL_LPM_EnableSleep();
+	//LL_LPM_EnableSleepOnExit();
+
+	while (1)  {
+		if (blue_mode){
+			switch(expe){
+			case 1:
+				__WFI();
+				break;
+			case 2:
+				LL_RCC_MSI_EnablePLLMode();
+				break;
+			}
+
+		}
+	}
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ * 24Mhz + RTC + LSE
+ */
+void SystemClock_Config_24M_LSE(void)
+{
+	LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)
+	{
+	}
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_RCC_MSI_Enable();
+
+	/* Wait till MSI is ready */
+	while(LL_RCC_MSI_IsReady() != 1)
+	{
+
+	}
+
+	LL_PWR_EnableBkUpAccess();
+	LL_RCC_ForceBackupDomainReset();
+	LL_RCC_ReleaseBackupDomainReset();
+	LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_LOW);
+
+	LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetCalibTrimming(0);
+	//  LL_RCC_MSI_EnablePLLMode();
+
+	LL_RCC_LSE_Enable();
+
+	/* Wait till LSE is ready */
+	while(LL_RCC_LSE_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
+	LL_RCC_EnableRTC();
+
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 24, LL_RCC_PLLR_DIV_4);
+	LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_Enable();
+
+	/* Wait till PLL is ready */
+	while(LL_RCC_PLL_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+	/* Wait till System clock is ready */
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	{
+
+	}
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_SetSystemCoreClock(24000000);
+
+	/* Update the time base */
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	{
+		//    Error_Handler();
+	}
+}
+
+
+void SystemClock_Config_80M(void)
+{
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_4)
+	{
+	}
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_RCC_MSI_Enable();
+
+	/* Wait till MSI is ready */
+	while(LL_RCC_MSI_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetCalibTrimming(0);
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
+	LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_Enable();
+
+	/* Wait till PLL is ready */
+	while(LL_RCC_PLL_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+	/* Wait till System clock is ready */
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	{
+
+	}
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_SetSystemCoreClock(80000000);
+
+	/* Update the time base */
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	{
+		//    Error_Handler();
+	}
+}

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.resources/.history/c2/90b22559b028001b1d0af99b6389052e

@@ -0,0 +1,215 @@
+/* Project L476_ats_blink for STM32L476 mounted on Nucleo board:
+ * the user LED (mounted on pin PA-5) is flashed every second for 50 ms.
+ * The time base is provided by Systick (1000 ticks per second).
+ * The clock configuration is the default one (Sysclk = 80 MHz, derived from MSI and PLL).
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+// #if defined(USE_FULL_ASSERT)
+// #include "stm32_assert.h"
+// #endif /* USE_FULL_ASSERT */
+
+#include "gpio.h"
+
+// systick interrupt handler
+volatile uint32_t msTicks = 0;
+volatile uint8_t expe = 0;
+volatile uint8_t blue_mode = 0;
+
+void SysTick_Handler()
+{
+  if	( BLUE_BUTTON() ){
+			blue_mode = 1 ;
+  }
+
+  msTicks++;                                                /* See startup file startup_LPC17xx.s for SysTick vector */
+  if (msTicks == 5 * expe){
+	  LED_GREEN(0);
+  }else if(msTicks >= 200){
+	  msTicks = 0;
+	  LED_GREEN(1);
+  }
+ if(expe == 2){
+	 CLK_TOGGLE();
+ }
+}
+
+
+
+
+int main(void)
+{
+	if (RCC->BDCR & RCC_BDCR_LSEON) {
+			LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+			LL_PWR_EnableBkUpAccess();
+
+			//expe = register RTC
+			expe = RTC->BKP0R;
+
+			if (BLUE_BUTTON()){
+			expe ++;
+			RTC->BKP0R = expe;
+
+	}else{
+		SystemClock_Config_24M_LSE();
+		expe = 1;
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+		RTC->BKP0R = expe;
+	}
+	LL_PWR_DisableBkUpAccess();
+	switch(expe){
+			case 1:
+				/* Configure the system clock */
+				SystemClock_Config_80M();
+				break;
+			case 2:
+				/* Configure the system clock */
+				SystemClock_Config_24M_LSE();
+				break;
+			}
+
+
+
+
+// config GPIO
+GPIO_init();
+
+// init systick timer (tick period at 1 ms)
+LL_Init1msTick( SystemCoreClock );
+LL_SYSTICK_EnableIT();
+
+//Setup Sleep mode
+LL_LPM_EnableSleep();
+//LL_LPM_EnableSleepOnExit();
+
+while (1)  {
+	if (blue_mode){
+		switch(expe){
+					case 1:
+						__WFI();
+						break;
+					case 2:
+						LL_RCC_MSI_EnablePLLMode();
+						break;
+					}
+
+		}
+	}
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  * 24Mhz + RTC + LSE
+  */
+void SystemClock_Config_24M_LSE(void)
+{
+  LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+  LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+  while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)
+  {
+  }
+  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+  LL_RCC_MSI_Enable();
+
+   /* Wait till MSI is ready */
+  while(LL_RCC_MSI_IsReady() != 1)
+  {
+
+  }
+
+  LL_PWR_EnableBkUpAccess();
+  LL_RCC_ForceBackupDomainReset();
+  LL_RCC_ReleaseBackupDomainReset();
+  LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_LOW);
+
+  LL_RCC_MSI_EnableRangeSelection();
+  LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+  LL_RCC_MSI_SetCalibTrimming(0);
+//  LL_RCC_MSI_EnablePLLMode();
+
+  LL_RCC_LSE_Enable();
+
+      /* Wait till LSE is ready */
+     while(LL_RCC_LSE_IsReady() != 1)
+     {
+
+     }
+    LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
+    LL_RCC_EnableRTC();
+
+  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 24, LL_RCC_PLLR_DIV_4);
+  LL_RCC_PLL_EnableDomain_SYS();
+  LL_RCC_PLL_Enable();
+
+   /* Wait till PLL is ready */
+  while(LL_RCC_PLL_IsReady() != 1)
+  {
+
+  }
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+   /* Wait till System clock is ready */
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+  {
+
+  }
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+  LL_SetSystemCoreClock(24000000);
+
+   /* Update the time base */
+  if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+  {
+//    Error_Handler();
+  }
+}
+
+
+void SystemClock_Config_80M(void)
+{
+  LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
+  while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_4)
+  {
+  }
+  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+  LL_RCC_MSI_Enable();
+
+   /* Wait till MSI is ready */
+  while(LL_RCC_MSI_IsReady() != 1)
+  {
+
+  }
+  LL_RCC_MSI_EnableRangeSelection();
+  LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+  LL_RCC_MSI_SetCalibTrimming(0);
+  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
+  LL_RCC_PLL_EnableDomain_SYS();
+  LL_RCC_PLL_Enable();
+
+   /* Wait till PLL is ready */
+  while(LL_RCC_PLL_IsReady() != 1)
+  {
+
+  }
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+   /* Wait till System clock is ready */
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+  {
+
+  }
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+  LL_SetSystemCoreClock(80000000);
+
+   /* Update the time base */
+  if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+  {
+//    Error_Handler();
+  }
+}

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.resources/.history/cb/b0b0c2d1ae28001b1d0af99b6389052e

@@ -0,0 +1,217 @@
+/* Project L476_ats_blink for STM32L476 mounted on Nucleo board:
+ * the user LED (mounted on pin PA-5) is flashed every second for 50 ms.
+ * The time base is provided by Systick (1000 ticks per second).
+ * The clock configuration is the default one (Sysclk = 80 MHz, derived from MSI and PLL).
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+// #if defined(USE_FULL_ASSERT)
+// #include "stm32_assert.h"
+// #endif /* USE_FULL_ASSERT */
+
+#include "gpio.h"
+
+// systick interrupt handler
+volatile uint32_t msTicks = 0;
+volatile uint8_t expe = 2;
+volatile uint8_t blue_mode = 0;
+
+void SysTick_Handler()
+{
+  if	( BLUE_BUTTON() ){
+			blue_mode = 1 ;
+  }
+
+  msTicks++;                                                /* See startup file startup_LPC17xx.s for SysTick vector */
+  if (msTicks == 5 * expe){
+	  LED_GREEN(0);
+  }else if(msTicks >= 200){
+	  msTicks = 0;
+	  LED_GREEN(1);
+  }
+ if(expe == 2){
+	 CLK_TOGGLE();
+ }
+}
+
+
+
+
+int main(void)
+{
+//	if (RCC->BDCR & RCC_BDCR_LSEON) {
+//			LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+//			LL_PWR_EnableBkUpAccess();
+//
+//			//expe = register RTC
+//			expe = RTC->BKP0R;
+//			if (expe == 0){
+//				expe = 1;
+//				RTC->BKP0R = expe;
+//			}else if (expe != 0 && BLUE_BUTTON()){
+//				expe ++;
+//				RTC->BKP0R = expe;
+//			}
+//	}else{
+//		SystemClock_Config_24M_LSE();
+//		expe = 1;
+//		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+//		LL_PWR_EnableBkUpAccess();
+//		RTC->BKP0R = expe;
+//	}
+//	LL_PWR_DisableBkUpAccess();
+	switch(expe){
+			case 1:
+				/* Configure the system clock */
+				SystemClock_Config_80M();
+				break;
+			case 2:
+				/* Configure the system clock */
+				SystemClock_Config_24M_LSE();
+				break;
+			}
+
+
+
+
+// config GPIO
+GPIO_init();
+
+// init systick timer (tick period at 1 ms)
+LL_Init1msTick( SystemCoreClock );
+LL_SYSTICK_EnableIT();
+
+//Setup Sleep mode
+LL_LPM_EnableSleep();
+//LL_LPM_EnableSleepOnExit();
+
+while (1)  {
+	if (blue_mode){
+		switch(expe){
+					case 1:
+						__WFI();
+						break;
+					case 2:
+						LL_RCC_MSI_EnablePLLMode();
+						break;
+					}
+
+		}
+	}
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  * 24Mhz + RTC + LSE
+  */
+void SystemClock_Config_24M_LSE(void)
+{
+  LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+  LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+  while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)
+  {
+  }
+  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+  LL_RCC_MSI_Enable();
+
+   /* Wait till MSI is ready */
+  while(LL_RCC_MSI_IsReady() != 1)
+  {
+
+  }
+
+  LL_PWR_EnableBkUpAccess();
+  LL_RCC_ForceBackupDomainReset();
+  LL_RCC_ReleaseBackupDomainReset();
+  LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_LOW);
+
+  LL_RCC_MSI_EnableRangeSelection();
+  LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+  LL_RCC_MSI_SetCalibTrimming(0);
+//  LL_RCC_MSI_EnablePLLMode();
+
+  LL_RCC_LSE_Enable();
+
+      /* Wait till LSE is ready */
+     while(LL_RCC_LSE_IsReady() != 1)
+     {
+
+     }
+    LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
+    LL_RCC_EnableRTC();
+
+  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 24, LL_RCC_PLLR_DIV_4);
+  LL_RCC_PLL_EnableDomain_SYS();
+  LL_RCC_PLL_Enable();
+
+   /* Wait till PLL is ready */
+  while(LL_RCC_PLL_IsReady() != 1)
+  {
+
+  }
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+   /* Wait till System clock is ready */
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+  {
+
+  }
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+  LL_SetSystemCoreClock(24000000);
+
+   /* Update the time base */
+  if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+  {
+//    Error_Handler();
+  }
+}
+
+
+void SystemClock_Config_80M(void)
+{
+  LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
+  while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_4)
+  {
+  }
+  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+  LL_RCC_MSI_Enable();
+
+   /* Wait till MSI is ready */
+  while(LL_RCC_MSI_IsReady() != 1)
+  {
+
+  }
+  LL_RCC_MSI_EnableRangeSelection();
+  LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+  LL_RCC_MSI_SetCalibTrimming(0);
+  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
+  LL_RCC_PLL_EnableDomain_SYS();
+  LL_RCC_PLL_Enable();
+
+   /* Wait till PLL is ready */
+  while(LL_RCC_PLL_IsReady() != 1)
+  {
+
+  }
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+   /* Wait till System clock is ready */
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+  {
+
+  }
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+  LL_SetSystemCoreClock(80000000);
+
+   /* Update the time base */
+  if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+  {
+//    Error_Handler();
+  }
+}

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.resources/.history/fd/00deef80b428001b1d0af99b6389052e

@@ -0,0 +1,218 @@
+/* Project L476_ats_blink for STM32L476 mounted on Nucleo board:
+ * the user LED (mounted on pin PA-5) is flashed every second for 50 ms.
+ * The time base is provided by Systick (1000 ticks per second).
+ * The clock configuration is the default one (Sysclk = 80 MHz, derived from MSI and PLL).
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+// #if defined(USE_FULL_ASSERT)
+// #include "stm32_assert.h"
+// #endif /* USE_FULL_ASSERT */
+
+#include "gpio.h"
+
+// systick interrupt handler
+volatile uint32_t msTicks = 0;
+volatile uint8_t expe = 0;
+volatile uint8_t blue_mode = 0;
+
+void SysTick_Handler()
+{
+	if	( BLUE_BUTTON() ){
+		blue_mode = 1 ;
+	}
+
+	msTicks++;                                                /* See startup file startup_LPC17xx.s for SysTick vector */
+	if (msTicks == 5 * expe){
+		LED_GREEN(0);
+	}else if(msTicks >= 200){
+		msTicks = 0;
+		LED_GREEN(1);
+	}
+	if(expe == 2){
+		CLK_TOGGLE();
+	}
+}
+
+
+
+
+int main(void)
+{
+
+
+	// config GPIO
+	GPIO_init();
+
+	if (RCC->BDCR & RCC_BDCR_LSEON) {
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+
+		//expe = register RTC
+		expe = RTC->BKP0R;
+
+		if (BLUE_BUTTON()){
+
+			expe ++;
+
+			if (expe > 2) expe = 1;
+			RTC->BKP0R = expe;
+		}
+	}else{
+		SystemClock_Config_24M_LSE();
+		expe = 1;
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_PWR_EnableBkUpAccess();
+		RTC->BKP0R = expe;
+	}
+	LL_PWR_DisableBkUpAccess();
+	switch(expe){
+	case 1:
+		/* Configure the system clock */
+		SystemClock_Config_80M();
+		break;
+	case 2:
+		/* Configure the system clock */
+		SystemClock_Config_24M_LSE();
+		break;
+	}
+
+
+	// init systick timer (tick period at 1 ms)
+	LL_Init1msTick( SystemCoreClock );
+	LL_SYSTICK_EnableIT();
+
+	//Setup Sleep mode
+	LL_LPM_EnableSleep();
+	//LL_LPM_EnableSleepOnExit();
+
+	while (1)  {
+		if (blue_mode){
+			switch(expe){
+			case 1:
+				__WFI();
+				break;
+			case 2:
+				LL_RCC_MSI_EnablePLLMode();
+				break;
+			}
+
+		}
+	}
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ * 24Mhz + RTC + LSE
+ */
+void SystemClock_Config_24M_LSE(void)
+{
+	LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)
+	{
+	}
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_RCC_MSI_Enable();
+
+	/* Wait till MSI is ready */
+	while(LL_RCC_MSI_IsReady() != 1)
+	{
+
+	}
+
+	LL_PWR_EnableBkUpAccess();
+//	LL_RCC_ForceBackupDomainReset();
+	LL_RCC_ReleaseBackupDomainReset();
+	LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_LOW);
+
+	LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetCalibTrimming(0);
+	//  LL_RCC_MSI_EnablePLLMode();
+
+	LL_RCC_LSE_Enable();
+
+	/* Wait till LSE is ready */
+	while(LL_RCC_LSE_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
+	LL_RCC_EnableRTC();
+
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 24, LL_RCC_PLLR_DIV_4);
+	LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_Enable();
+
+	/* Wait till PLL is ready */
+	while(LL_RCC_PLL_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+	/* Wait till System clock is ready */
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	{
+
+	}
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_SetSystemCoreClock(24000000);
+
+	/* Update the time base */
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	{
+		//    Error_Handler();
+	}
+}
+
+
+void SystemClock_Config_80M(void)
+{
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_4)
+	{
+	}
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_RCC_MSI_Enable();
+
+	/* Wait till MSI is ready */
+	while(LL_RCC_MSI_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetCalibTrimming(0);
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
+	LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_Enable();
+
+	/* Wait till PLL is ready */
+	while(LL_RCC_PLL_IsReady() != 1)
+	{
+
+	}
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+	/* Wait till System clock is ready */
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	{
+
+	}
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_SetSystemCoreClock(80000000);
+
+	/* Update the time base */
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	{
+		//    Error_Handler();
+	}
+}

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.runtime/.settings/org.eclipse.debug.core.prefs

@@ -4,4 +4,4 @@
 //org.eclipse.debug.core.PREFERRED_DELEGATES/org.eclipse.cdt.launch.postmortemLaunchType=org.eclipse.cdt.dsf.gdb.launch.coreCLaunch,debug,;
 //org.eclipse.debug.core.PREFERRED_DELEGATES/org.eclipse.cdt.launch.remoteApplicationLaunchType=org.eclipse.rse.remotecdt.dsf.debug,debug,;
 eclipse.preferences.version=1
-prefWatchExpressions=<?xml version\="1.0" encoding\="UTF-8" standalone\="no"?>\r\n<watchExpressions/>\r\n
+prefWatchExpressions=<?xml version\="1.0" encoding\="UTF-8" standalone\="no"?>\r\n<watchExpressions>\r\n<expression enabled\="true" text\="expe"/>\r\n<expression enabled\="true" text\="RCC-&gt;BDCR"/>\r\n<expression enabled\="true" text\="blue_mode"/>\r\n<expression enabled\="true" text\="RTC-&gt;BKP0R"/>\r\n</watchExpressions>\r\n

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.runtime/.settings/org.eclipse.debug.ui.prefs

@@ -2,5 +2,7 @@ eclipse.preferences.version=1
 org.eclipse.debug.ui.MemoryView.orientation=0
 org.eclipse.debug.ui.PREF_LAUNCH_PERSPECTIVES=<?xml version\="1.0" encoding\="UTF-8" standalone\="no"?>\r\n<launchPerspectives/>\r\n
 org.eclipse.debug.ui.user_view_bindings=<?xml version\="1.0" encoding\="UTF-8" standalone\="no"?>\r\n<viewBindings>\r\n<view id\="org.eclipse.debug.ui.ExpressionView">\r\n<perspective id\="org.eclipse.debug.ui.DebugPerspective" userAction\="opened"/>\r\n</view>\r\n</viewBindings>\r\n
+pref_state_memento.org.eclipse.debug.ui.ExpressionView=<?xml version\="1.0" encoding\="UTF-8"?>\r\n<VariablesViewMemento org.eclipse.debug.ui.SASH_DETAILS_PART\="315" org.eclipse.debug.ui.SASH_VIEW_PART\="684">\r\n<PRESENTATION_CONTEXT_PROPERTIES IMemento.internal.id\="org.eclipse.debug.ui.ExpressionView">\r\n<INTEGER IMemento.internal.id\="initialChildCountLimitForCollections" INTEGER\="100"/>\r\n<PERSISTABLE IMemento.internal.id\="org.eclipse.cdt.dsf.ui.elementFormatPersistable" PERSISTABLE\="org.eclipse.cdt.dsf.ui.simpleMapPersistableFactory">\r\n<type>java.lang.String</type>\r\n</PERSISTABLE>\r\n<BOOLEAN BOOLEAN\="true" IMemento.internal.id\="PRESENTATION_SHOW_LOGICAL_STRUCTURES"/>\r\n</PRESENTATION_CONTEXT_PROPERTIES>\r\n</VariablesViewMemento>
+pref_state_memento.org.eclipse.debug.ui.VariableView=<?xml version\="1.0" encoding\="UTF-8"?>\r\n<VariablesViewMemento org.eclipse.debug.ui.SASH_DETAILS_PART\="315" org.eclipse.debug.ui.SASH_VIEW_PART\="684">\r\n<PRESENTATION_CONTEXT_PROPERTIES IMemento.internal.id\="org.eclipse.debug.ui.VariableView">\r\n<INTEGER IMemento.internal.id\="initialChildCountLimitForCollections" INTEGER\="100"/>\r\n<BOOLEAN BOOLEAN\="true" IMemento.internal.id\="PRESENTATION_SHOW_LOGICAL_STRUCTURES"/>\r\n</PRESENTATION_CONTEXT_PROPERTIES>\r\n</VariablesViewMemento>
 preferredDetailPanes=NumberFormatPane\:NumberFormatPane|DefaultDetailPane\:DefaultDetailPane|
 preferredTargets=org.eclipse.cdt.debug.ui.toggleCBreakpointTarget,org.eclipse.cdt.debug.ui.toggleCDynamicPrintfTarget\:org.eclipse.cdt.debug.ui.toggleCBreakpointTarget|

PlaygroundYoupi/.metadata/.plugins/org.eclipse.core.runtime/.settings/org.eclipse.launchbar.core.prefs

@@ -5,4 +5,4 @@ configDescList=org.eclipse.cdt.dsf.gdb.gdbRemotedescriptorType\:L476_ats_blink-m
 eclipse.preferences.version=1
 org.eclipse.cdt.dsf.gdb.gdbRemotedescriptorType\:L476_ats_blink-master\ Debug/activeLaunchMode=run
 org.eclipse.cdt.dsf.gdb.gdbRemotedescriptorType\:L476_ats_blink-master\ Debug/activeLaunchTarget=null\:---
-org.eclipse.cdt.dsf.gdb.gdbRemotedescriptorType\:RealOne\ Debug/activeLaunchMode=run
+org.eclipse.cdt.dsf.gdb.gdbRemotedescriptorType\:RealOne\ Debug/activeLaunchMode=debug

RealOne/Core/Src/main.c

@@ -14,25 +14,25 @@
 
 // systick interrupt handler
 volatile uint32_t msTicks = 0;
-volatile uint8_t expe = 2;
+volatile uint8_t expe = 0;
 volatile uint8_t blue_mode = 0;
 
 void SysTick_Handler()
 {
-  if	( BLUE_BUTTON() ){
+	if	( BLUE_BUTTON() ){
-			blue_mode = 1 ;
+		blue_mode = 1 ;
-  }
+	}
 
-  msTicks++;                                                /* See startup file startup_LPC17xx.s for SysTick vector */
+	msTicks++;                                                /* See startup file startup_LPC17xx.s for SysTick vector */
-  if (msTicks == 5 * expe){
+	if (msTicks == 5 * expe){
-	  LED_GREEN(0);
+		LED_GREEN(0);
-  }else if(msTicks >= 200){
+	}else if(msTicks >= 200){
-	  msTicks = 0;
+		msTicks = 0;
-	  LED_GREEN(1);
+		LED_GREEN(1);
-  }
+	}
- if(expe == 2){
+	if(expe == 2){
-	 CLK_TOGGLE();
+		CLK_TOGGLE();
- }
+	}
 }
 
 
@@ -40,178 +40,182 @@ void SysTick_Handler()
 
 int main(void)
 {
+
+
+	// config GPIO
+	GPIO_init();
+
 //	if (RCC->BDCR & RCC_BDCR_LSEON) {
-//			LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
-//			LL_PWR_EnableBkUpAccess();
+		LL_PWR_EnableBkUpAccess();
-//
+
-//			//expe = register RTC
+		//expe = register RTC
-//			expe = RTC->BKP0R;
+		expe = RTC->BKP0R;
-//			if (expe == 0){
+		if (expe == 0) {
-//				expe = 1;
+			SystemClock_Config_24M_LSE();
-//				RTC->BKP0R = expe;
+			expe = 1;
-//			}else if (expe != 0 && BLUE_BUTTON()){
+			LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
-//				expe ++;
+			LL_PWR_EnableBkUpAccess();
-//				RTC->BKP0R = expe;
+			RTC->BKP0R = expe;
-//			}
+		}
+
+		if (BLUE_BUTTON()){
+
+			expe ++;
+
+			if (expe > 2) expe = 1;
+			RTC->BKP0R = expe;
+		}
 //	}else{
-//		SystemClock_Config_24M_LSE();
+
-//		expe = 1;
-//		LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
-//		LL_PWR_EnableBkUpAccess();
-//		RTC->BKP0R = expe;
 //	}
-//	LL_PWR_DisableBkUpAccess();
+	LL_PWR_DisableBkUpAccess();
 	switch(expe){
+	case 1:
+		/* Configure the system clock */
+		SystemClock_Config_80M();
+		break;
+	case 2:
+		/* Configure the system clock */
+		SystemClock_Config_24M_LSE();
+		break;
+	}
+
+
+	// init systick timer (tick period at 1 ms)
+	LL_Init1msTick( SystemCoreClock );
+	LL_SYSTICK_EnableIT();
+
+	//Setup Sleep mode
+	LL_LPM_EnableSleep();
+	//LL_LPM_EnableSleepOnExit();
+
+	while (1)  {
+		if (blue_mode){
+			switch(expe){
 			case 1:
-				/* Configure the system clock */
+				__WFI();
-				SystemClock_Config_80M();
 				break;
 			case 2:
-				/* Configure the system clock */
+				LL_RCC_MSI_EnablePLLMode();
-				SystemClock_Config_24M_LSE();
 				break;
 			}
 
-
-
-
-// config GPIO
-GPIO_init();
-
-// init systick timer (tick period at 1 ms)
-LL_Init1msTick( SystemCoreClock );
-LL_SYSTICK_EnableIT();
-
-//Setup Sleep mode
-LL_LPM_EnableSleep();
-//LL_LPM_EnableSleepOnExit();
-
-while (1)  {
-	if (blue_mode){
-		switch(expe){
-					case 1:
-						__WFI();
-						break;
-					case 2:
-						LL_RCC_MSI_EnablePLLMode();
-						break;
-					}
-
 		}
 	}
 }
 
 /**
-  * @brief System Clock Configuration
+ * @brief System Clock Configuration
-  * @retval None
+ * @retval None
-  * 24Mhz + RTC + LSE
+ * 24Mhz + RTC + LSE
-  */
+ */
 void SystemClock_Config_24M_LSE(void)
 {
-  LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
+	LL_APB1_GRP1_EnableClock( LL_APB1_GRP1_PERIPH_PWR );
-  LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
-  while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)
-  {
+	{
-  }
+	}
-  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
-  LL_RCC_MSI_Enable();
+	LL_RCC_MSI_Enable();
 
-   /* Wait till MSI is ready */
+	/* Wait till MSI is ready */
-  while(LL_RCC_MSI_IsReady() != 1)
+	while(LL_RCC_MSI_IsReady() != 1)
-  {
+	{
 
-  }
+	}
 
-  LL_PWR_EnableBkUpAccess();
+	LL_PWR_EnableBkUpAccess();
-  LL_RCC_ForceBackupDomainReset();
+//	LL_RCC_ForceBackupDomainReset();
-  LL_RCC_ReleaseBackupDomainReset();
+	LL_RCC_ReleaseBackupDomainReset();
-  LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_LOW);
+	LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_LOW);
 
-  LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_EnableRangeSelection();
-  LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
-  LL_RCC_MSI_SetCalibTrimming(0);
+	LL_RCC_MSI_SetCalibTrimming(0);
-//  LL_RCC_MSI_EnablePLLMode();
+	//  LL_RCC_MSI_EnablePLLMode();
 
-  LL_RCC_LSE_Enable();
+	LL_RCC_LSE_Enable();
 
-      /* Wait till LSE is ready */
+	/* Wait till LSE is ready */
-     while(LL_RCC_LSE_IsReady() != 1)
+	while(LL_RCC_LSE_IsReady() != 1)
-     {
+	{
 
-     }
+	}
-    LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
+	LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
-    LL_RCC_EnableRTC();
+	LL_RCC_EnableRTC();
 
-  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 24, LL_RCC_PLLR_DIV_4);
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 24, LL_RCC_PLLR_DIV_4);
-  LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_EnableDomain_SYS();
-  LL_RCC_PLL_Enable();
+	LL_RCC_PLL_Enable();
 
-   /* Wait till PLL is ready */
+	/* Wait till PLL is ready */
-  while(LL_RCC_PLL_IsReady() != 1)
+	while(LL_RCC_PLL_IsReady() != 1)
-  {
+	{
 
-  }
+	}
-  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
 
-   /* Wait till System clock is ready */
+	/* Wait till System clock is ready */
-  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
-  {
+	{
 
-  }
+	}
-  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
-  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
-  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
-  LL_SetSystemCoreClock(24000000);
+	LL_SetSystemCoreClock(24000000);
 
-   /* Update the time base */
+	/* Update the time base */
-  if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
-  {
+	{
-//    Error_Handler();
+		//    Error_Handler();
-  }
+	}
 }
 
 
 void SystemClock_Config_80M(void)
 {
-  LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
+	LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
-  while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_4)
+	while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_4)
-  {
+	{
-  }
+	}
-  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
-  LL_RCC_MSI_Enable();
+	LL_RCC_MSI_Enable();
 
-   /* Wait till MSI is ready */
+	/* Wait till MSI is ready */
-  while(LL_RCC_MSI_IsReady() != 1)
+	while(LL_RCC_MSI_IsReady() != 1)
-  {
+	{
 
-  }
+	}
-  LL_RCC_MSI_EnableRangeSelection();
+	LL_RCC_MSI_EnableRangeSelection();
-  LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+	LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
-  LL_RCC_MSI_SetCalibTrimming(0);
+	LL_RCC_MSI_SetCalibTrimming(0);
-  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
+	LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
-  LL_RCC_PLL_EnableDomain_SYS();
+	LL_RCC_PLL_EnableDomain_SYS();
-  LL_RCC_PLL_Enable();
+	LL_RCC_PLL_Enable();
 
-   /* Wait till PLL is ready */
+	/* Wait till PLL is ready */
-  while(LL_RCC_PLL_IsReady() != 1)
+	while(LL_RCC_PLL_IsReady() != 1)
-  {
+	{
 
-  }
+	}
-  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+	LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
 
-   /* Wait till System clock is ready */
+	/* Wait till System clock is ready */
-  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+	while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
-  {
+	{
 
-  }
+	}
-  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+	LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
-  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+	LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
-  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+	LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
-  LL_SetSystemCoreClock(80000000);
+	LL_SetSystemCoreClock(80000000);
 
-   /* Update the time base */
+	/* Update the time base */
-  if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+	if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
-  {
+	{
-//    Error_Handler();
+		//    Error_Handler();
-  }
+	}
 }

RealOne/Debug/Core/Src/main.su

@@ -14,7 +14,6 @@ stm32l4xx_ll_rcc.h:2792:22:LL_RCC_SetAPB1Prescaler	16	static
 stm32l4xx_ll_rcc.h:2808:22:LL_RCC_SetAPB2Prescaler	16	static
 stm32l4xx_ll_rcc.h:3650:22:LL_RCC_SetRTCClockSource	16	static
 stm32l4xx_ll_rcc.h:3674:22:LL_RCC_EnableRTC	4	static
-stm32l4xx_ll_rcc.h:3704:22:LL_RCC_ForceBackupDomainReset	4	static
 stm32l4xx_ll_rcc.h:3714:22:LL_RCC_ReleaseBackupDomainReset	4	static
 stm32l4xx_ll_rcc.h:3733:22:LL_RCC_PLL_Enable	4	static
 stm32l4xx_ll_rcc.h:3754:26:LL_RCC_PLL_IsReady	4	static
@@ -27,7 +26,8 @@ stm32l4xx_ll_cortex.h:272:22:LL_SYSTICK_EnableIT	4	static
 stm32l4xx_ll_cortex.h:310:22:LL_LPM_EnableSleep	4	static
 stm32l4xx_ll_pwr.h:344:22:LL_PWR_SetRegulVoltageScaling	16	static
 stm32l4xx_ll_pwr.h:398:22:LL_PWR_EnableBkUpAccess	4	static
+stm32l4xx_ll_pwr.h:408:22:LL_PWR_DisableBkUpAccess	4	static
 main.c:20:6:SysTick_Handler	8	static
 main.c:41:5:main	8	static,ignoring_inline_asm
-main.c:109:6:SystemClock_Config_24M_LSE	8	static
+main.c:113:6:SystemClock_Config_24M_LSE	8	static
-main.c:174:6:SystemClock_Config_80M	8	static
+main.c:178:6:SystemClock_Config_80M	8	static

RealOne/Debug/RealOne.map

@@ -3456,7 +3456,7 @@ LOAD c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.exte
                 0x0000000008000000                g_pfnVectors
                 0x0000000008000188                . = ALIGN (0x4)
 
-.text           0x0000000008000188      0xca8
+.text           0x0000000008000188      0xd1c
                 0x0000000008000188                . = ALIGN (0x4)
  *(.text)
  .text          0x0000000008000188       0x40 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
@@ -3520,313 +3520,311 @@ LOAD c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.exte
                 0x00000000080005f4       0x2c Core/Src/main.o
  .text.LL_RCC_EnableRTC
                 0x0000000008000620       0x24 Core/Src/main.o
- .text.LL_RCC_ForceBackupDomainReset
-                0x0000000008000644       0x24 Core/Src/main.o
  .text.LL_RCC_ReleaseBackupDomainReset
-                0x0000000008000668       0x24 Core/Src/main.o
+                0x0000000008000644       0x24 Core/Src/main.o
  .text.LL_RCC_PLL_Enable
-                0x000000000800068c       0x20 Core/Src/main.o
+                0x0000000008000668       0x20 Core/Src/main.o
  .text.LL_RCC_PLL_IsReady
-                0x00000000080006ac       0x28 Core/Src/main.o
+                0x0000000008000688       0x28 Core/Src/main.o
  .text.LL_RCC_PLL_ConfigDomain_SYS
-                0x00000000080006d4       0x40 Core/Src/main.o
+                0x00000000080006b0       0x40 Core/Src/main.o
  .text.LL_RCC_PLL_EnableDomain_SYS
-                0x0000000008000714       0x20 Core/Src/main.o
+                0x00000000080006f0       0x20 Core/Src/main.o
  .text.LL_APB1_GRP1_EnableClock
-                0x0000000008000734       0x30 Core/Src/main.o
+                0x0000000008000710       0x30 Core/Src/main.o
  .text.LL_FLASH_SetLatency
-                0x0000000008000764       0x28 Core/Src/main.o
+                0x0000000008000740       0x28 Core/Src/main.o
  .text.LL_FLASH_GetLatency
-                0x000000000800078c       0x1c Core/Src/main.o
+                0x0000000008000768       0x1c Core/Src/main.o
  .text.LL_SYSTICK_EnableIT
-                0x00000000080007a8       0x20 Core/Src/main.o
+                0x0000000008000784       0x20 Core/Src/main.o
  .text.LL_LPM_EnableSleep
-                0x00000000080007c8       0x20 Core/Src/main.o
+                0x00000000080007a4       0x20 Core/Src/main.o
  .text.LL_PWR_SetRegulVoltageScaling
-                0x00000000080007e8       0x28 Core/Src/main.o
+                0x00000000080007c4       0x28 Core/Src/main.o
  .text.LL_PWR_EnableBkUpAccess
-                0x0000000008000810       0x20 Core/Src/main.o
+                0x00000000080007ec       0x20 Core/Src/main.o
+ .text.LL_PWR_DisableBkUpAccess
+                0x000000000800080c       0x20 Core/Src/main.o
  .text.SysTick_Handler
-                0x0000000008000830       0x70 Core/Src/main.o
+                0x000000000800082c       0x70 Core/Src/main.o
-                0x0000000008000830                SysTick_Handler
+                0x000000000800082c                SysTick_Handler
- .text.main     0x00000000080008a0       0x68 Core/Src/main.o
+ .text.main     0x000000000800089c       0xe4 Core/Src/main.o
-                0x00000000080008a0                main
+                0x000000000800089c                main
  .text.SystemClock_Config_24M_LSE
-                0x0000000008000908       0xd0 Core/Src/main.o
+                0x0000000008000980       0xcc Core/Src/main.o
-                0x0000000008000908                SystemClock_Config_24M_LSE
+                0x0000000008000980                SystemClock_Config_24M_LSE
  .text.SystemClock_Config_80M
-                0x00000000080009d8       0x98 Core/Src/main.o
+                0x0000000008000a4c       0x98 Core/Src/main.o
-                0x00000000080009d8                SystemClock_Config_80M
+                0x0000000008000a4c                SystemClock_Config_80M
  .text.NMI_Handler
-                0x0000000008000a70        0xe Core/Src/stm32l4xx_it.o
+                0x0000000008000ae4        0xe Core/Src/stm32l4xx_it.o
-                0x0000000008000a70                NMI_Handler
+                0x0000000008000ae4                NMI_Handler
  .text.HardFault_Handler
-                0x0000000008000a7e        0x6 Core/Src/stm32l4xx_it.o
+                0x0000000008000af2        0x6 Core/Src/stm32l4xx_it.o
-                0x0000000008000a7e                HardFault_Handler
+                0x0000000008000af2                HardFault_Handler
  .text.MemManage_Handler
-                0x0000000008000a84        0x6 Core/Src/stm32l4xx_it.o
+                0x0000000008000af8        0x6 Core/Src/stm32l4xx_it.o
-                0x0000000008000a84                MemManage_Handler
+                0x0000000008000af8                MemManage_Handler
  .text.BusFault_Handler
-                0x0000000008000a8a        0x6 Core/Src/stm32l4xx_it.o
+                0x0000000008000afe        0x6 Core/Src/stm32l4xx_it.o
-                0x0000000008000a8a                BusFault_Handler
+                0x0000000008000afe                BusFault_Handler
  .text.UsageFault_Handler
-                0x0000000008000a90        0x6 Core/Src/stm32l4xx_it.o
+                0x0000000008000b04        0x6 Core/Src/stm32l4xx_it.o
-                0x0000000008000a90                UsageFault_Handler
+                0x0000000008000b04                UsageFault_Handler
  .text.SVC_Handler
-                0x0000000008000a96        0xe Core/Src/stm32l4xx_it.o
+                0x0000000008000b0a        0xe Core/Src/stm32l4xx_it.o
-                0x0000000008000a96                SVC_Handler
+                0x0000000008000b0a                SVC_Handler
  .text.DebugMon_Handler
-                0x0000000008000aa4        0xe Core/Src/stm32l4xx_it.o
+                0x0000000008000b18        0xe Core/Src/stm32l4xx_it.o
-                0x0000000008000aa4                DebugMon_Handler
+                0x0000000008000b18                DebugMon_Handler
  .text.PendSV_Handler
-                0x0000000008000ab2        0xe Core/Src/stm32l4xx_it.o
+                0x0000000008000b26        0xe Core/Src/stm32l4xx_it.o
-                0x0000000008000ab2                PendSV_Handler
+                0x0000000008000b26                PendSV_Handler
  .text.SystemInit
-                0x0000000008000ac0       0x6c Core/Src/system_stm32l4xx.o
+                0x0000000008000b34       0x6c Core/Src/system_stm32l4xx.o
-                0x0000000008000ac0                SystemInit
+                0x0000000008000b34                SystemInit
  .text.Reset_Handler
-                0x0000000008000b2c       0x50 Core/Startup/startup_stm32l476rgtx.o
+                0x0000000008000ba0       0x50 Core/Startup/startup_stm32l476rgtx.o
-                0x0000000008000b2c                Reset_Handler
+                0x0000000008000ba0                Reset_Handler
  .text.Default_Handler
-                0x0000000008000b7c        0x2 Core/Startup/startup_stm32l476rgtx.o
+                0x0000000008000bf0        0x2 Core/Startup/startup_stm32l476rgtx.o
-                0x0000000008000b7c                RTC_Alarm_IRQHandler
+                0x0000000008000bf0                RTC_Alarm_IRQHandler
-                0x0000000008000b7c                EXTI2_IRQHandler
+                0x0000000008000bf0                EXTI2_IRQHandler
-                0x0000000008000b7c                TIM8_TRG_COM_IRQHandler
+                0x0000000008000bf0                TIM8_TRG_COM_IRQHandler
-                0x0000000008000b7c                TIM8_CC_IRQHandler
+                0x0000000008000bf0                TIM8_CC_IRQHandler
-                0x0000000008000b7c                TIM1_CC_IRQHandler
+                0x0000000008000bf0                TIM1_CC_IRQHandler
-                0x0000000008000b7c                TSC_IRQHandler
+                0x0000000008000bf0                TSC_IRQHandler
-                0x0000000008000b7c                TAMP_STAMP_IRQHandler
+                0x0000000008000bf0                TAMP_STAMP_IRQHandler
-                0x0000000008000b7c                EXTI3_IRQHandler
+                0x0000000008000bf0                EXTI3_IRQHandler
-                0x0000000008000b7c                LPTIM2_IRQHandler
+                0x0000000008000bf0                LPTIM2_IRQHandler
-                0x0000000008000b7c                DFSDM1_FLT1_IRQHandler
+                0x0000000008000bf0                DFSDM1_FLT1_IRQHandler
-                0x0000000008000b7c                I2C3_ER_IRQHandler
+                0x0000000008000bf0                I2C3_ER_IRQHandler
-                0x0000000008000b7c                DFSDM1_FLT2_IRQHandler
+                0x0000000008000bf0                DFSDM1_FLT2_IRQHandler
-                0x0000000008000b7c                EXTI0_IRQHandler
+                0x0000000008000bf0                EXTI0_IRQHandler
-                0x0000000008000b7c                I2C2_EV_IRQHandler
+                0x0000000008000bf0                I2C2_EV_IRQHandler
-                0x0000000008000b7c                CAN1_RX0_IRQHandler
+                0x0000000008000bf0                CAN1_RX0_IRQHandler
-                0x0000000008000b7c                FPU_IRQHandler
+                0x0000000008000bf0                FPU_IRQHandler
-                0x0000000008000b7c                TIM1_UP_TIM16_IRQHandler
+                0x0000000008000bf0                TIM1_UP_TIM16_IRQHandler
-                0x0000000008000b7c                ADC1_2_IRQHandler
+                0x0000000008000bf0                ADC1_2_IRQHandler
-                0x0000000008000b7c                SPI1_IRQHandler
+                0x0000000008000bf0                SPI1_IRQHandler
-                0x0000000008000b7c                TIM6_DAC_IRQHandler
+                0x0000000008000bf0                TIM6_DAC_IRQHandler
-                0x0000000008000b7c                TIM8_UP_IRQHandler
+                0x0000000008000bf0                TIM8_UP_IRQHandler
-                0x0000000008000b7c                DMA2_Channel2_IRQHandler
+                0x0000000008000bf0                DMA2_Channel2_IRQHandler
-                0x0000000008000b7c                DMA1_Channel4_IRQHandler
+                0x0000000008000bf0                DMA1_Channel4_IRQHandler
-                0x0000000008000b7c                SAI2_IRQHandler
+                0x0000000008000bf0                SAI2_IRQHandler
-                0x0000000008000b7c                DFSDM1_FLT3_IRQHandler
+                0x0000000008000bf0                DFSDM1_FLT3_IRQHandler
-                0x0000000008000b7c                USART3_IRQHandler
+                0x0000000008000bf0                USART3_IRQHandler
-                0x0000000008000b7c                DMA1_Channel7_IRQHandler
+                0x0000000008000bf0                DMA1_Channel7_IRQHandler
-                0x0000000008000b7c                CAN1_RX1_IRQHandler
+                0x0000000008000bf0                CAN1_RX1_IRQHandler
-                0x0000000008000b7c                LCD_IRQHandler
+                0x0000000008000bf0                LCD_IRQHandler
-                0x0000000008000b7c                UART5_IRQHandler
+                0x0000000008000bf0                UART5_IRQHandler
-                0x0000000008000b7c                ADC3_IRQHandler
+                0x0000000008000bf0                ADC3_IRQHandler
-                0x0000000008000b7c                TIM4_IRQHandler
+                0x0000000008000bf0                TIM4_IRQHandler
-                0x0000000008000b7c                DMA2_Channel1_IRQHandler
+                0x0000000008000bf0                DMA2_Channel1_IRQHandler
-                0x0000000008000b7c                QUADSPI_IRQHandler
+                0x0000000008000bf0                QUADSPI_IRQHandler
-                0x0000000008000b7c                I2C1_EV_IRQHandler
+                0x0000000008000bf0                I2C1_EV_IRQHandler
-                0x0000000008000b7c                DMA1_Channel6_IRQHandler
+                0x0000000008000bf0                DMA1_Channel6_IRQHandler
-                0x0000000008000b7c                UART4_IRQHandler
+                0x0000000008000bf0                UART4_IRQHandler
-                0x0000000008000b7c                DMA2_Channel4_IRQHandler
+                0x0000000008000bf0                DMA2_Channel4_IRQHandler
-                0x0000000008000b7c                TIM3_IRQHandler
+                0x0000000008000bf0                TIM3_IRQHandler
-                0x0000000008000b7c                RCC_IRQHandler
+                0x0000000008000bf0                RCC_IRQHandler
-                0x0000000008000b7c                DMA1_Channel1_IRQHandler
+                0x0000000008000bf0                DMA1_Channel1_IRQHandler
-                0x0000000008000b7c                Default_Handler
+                0x0000000008000bf0                Default_Handler
-                0x0000000008000b7c                DMA2_Channel7_IRQHandler
+                0x0000000008000bf0                DMA2_Channel7_IRQHandler
-                0x0000000008000b7c                EXTI15_10_IRQHandler
+                0x0000000008000bf0                EXTI15_10_IRQHandler
-                0x0000000008000b7c                TIM7_IRQHandler
+                0x0000000008000bf0                TIM7_IRQHandler
-                0x0000000008000b7c                SDMMC1_IRQHandler
+                0x0000000008000bf0                SDMMC1_IRQHandler
-                0x0000000008000b7c                TIM5_IRQHandler
+                0x0000000008000bf0                TIM5_IRQHandler
-                0x0000000008000b7c                I2C3_EV_IRQHandler
+                0x0000000008000bf0                I2C3_EV_IRQHandler
-                0x0000000008000b7c                EXTI9_5_IRQHandler
+                0x0000000008000bf0                EXTI9_5_IRQHandler
-                0x0000000008000b7c                RTC_WKUP_IRQHandler
+                0x0000000008000bf0                RTC_WKUP_IRQHandler
-                0x0000000008000b7c                PVD_PVM_IRQHandler
+                0x0000000008000bf0                PVD_PVM_IRQHandler
-                0x0000000008000b7c                SPI2_IRQHandler
+                0x0000000008000bf0                SPI2_IRQHandler
-                0x0000000008000b7c                CAN1_TX_IRQHandler
+                0x0000000008000bf0                CAN1_TX_IRQHandler
-                0x0000000008000b7c                DMA2_Channel5_IRQHandler
+                0x0000000008000bf0                DMA2_Channel5_IRQHandler
-                0x0000000008000b7c                DMA1_Channel5_IRQHandler
+                0x0000000008000bf0                DMA1_Channel5_IRQHandler
-                0x0000000008000b7c                EXTI4_IRQHandler
+                0x0000000008000bf0                EXTI4_IRQHandler
-                0x0000000008000b7c                RNG_IRQHandler
+                0x0000000008000bf0                RNG_IRQHandler
-                0x0000000008000b7c                TIM1_TRG_COM_TIM17_IRQHandler
+                0x0000000008000bf0                TIM1_TRG_COM_TIM17_IRQHandler
-                0x0000000008000b7c                DMA1_Channel3_IRQHandler
+                0x0000000008000bf0                DMA1_Channel3_IRQHandler
-                0x0000000008000b7c                COMP_IRQHandler
+                0x0000000008000bf0                COMP_IRQHandler
-                0x0000000008000b7c                WWDG_IRQHandler
+                0x0000000008000bf0                WWDG_IRQHandler
-                0x0000000008000b7c                LPUART1_IRQHandler
+                0x0000000008000bf0                LPUART1_IRQHandler
-                0x0000000008000b7c                DMA2_Channel6_IRQHandler
+                0x0000000008000bf0                DMA2_Channel6_IRQHandler
-                0x0000000008000b7c                TIM2_IRQHandler
+                0x0000000008000bf0                TIM2_IRQHandler
-                0x0000000008000b7c                EXTI1_IRQHandler
+                0x0000000008000bf0                EXTI1_IRQHandler
-                0x0000000008000b7c                USART2_IRQHandler
+                0x0000000008000bf0                USART2_IRQHandler
-                0x0000000008000b7c                DFSDM1_FLT0_IRQHandler
+                0x0000000008000bf0                DFSDM1_FLT0_IRQHandler
-                0x0000000008000b7c                I2C2_ER_IRQHandler
+                0x0000000008000bf0                I2C2_ER_IRQHandler
-                0x0000000008000b7c                DMA1_Channel2_IRQHandler
+                0x0000000008000bf0                DMA1_Channel2_IRQHandler
-                0x0000000008000b7c                TIM8_BRK_IRQHandler
+                0x0000000008000bf0                TIM8_BRK_IRQHandler
-                0x0000000008000b7c                CAN1_SCE_IRQHandler
+                0x0000000008000bf0                CAN1_SCE_IRQHandler
-                0x0000000008000b7c                FLASH_IRQHandler
+                0x0000000008000bf0                FLASH_IRQHandler
-                0x0000000008000b7c                USART1_IRQHandler
+                0x0000000008000bf0                USART1_IRQHandler
-                0x0000000008000b7c                OTG_FS_IRQHandler
+                0x0000000008000bf0                OTG_FS_IRQHandler
-                0x0000000008000b7c                SPI3_IRQHandler
+                0x0000000008000bf0                SPI3_IRQHandler
-                0x0000000008000b7c                I2C1_ER_IRQHandler
+                0x0000000008000bf0                I2C1_ER_IRQHandler
-                0x0000000008000b7c                FMC_IRQHandler
+                0x0000000008000bf0                FMC_IRQHandler
-                0x0000000008000b7c                SWPMI1_IRQHandler
+                0x0000000008000bf0                SWPMI1_IRQHandler
-                0x0000000008000b7c                LPTIM1_IRQHandler
+                0x0000000008000bf0                LPTIM1_IRQHandler
-                0x0000000008000b7c                SAI1_IRQHandler
+                0x0000000008000bf0                SAI1_IRQHandler
-                0x0000000008000b7c                DMA2_Channel3_IRQHandler
+                0x0000000008000bf0                DMA2_Channel3_IRQHandler
-                0x0000000008000b7c                TIM1_BRK_TIM15_IRQHandler
+                0x0000000008000bf0                TIM1_BRK_TIM15_IRQHandler
- *fill*         0x0000000008000b7e        0x2 
+ *fill*         0x0000000008000bf2        0x2 
  .text.HAL_InitTick
-                0x0000000008000b80       0x78 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
+                0x0000000008000bf4       0x78 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
-                0x0000000008000b80                HAL_InitTick
+                0x0000000008000bf4                HAL_InitTick
  .text.__NVIC_GetPriorityGrouping
-                0x0000000008000bf8       0x1c Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
+                0x0000000008000c6c       0x1c Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
  .text.__NVIC_SetPriority
-                0x0000000008000c14       0x54 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
+                0x0000000008000c88       0x54 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
  .text.NVIC_EncodePriority
-                0x0000000008000c68       0x66 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
+                0x0000000008000cdc       0x66 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
- *fill*         0x0000000008000cce        0x2 
+ *fill*         0x0000000008000d42        0x2 
  .text.SysTick_Config
-                0x0000000008000cd0       0x44 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
+                0x0000000008000d44       0x44 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
  .text.HAL_NVIC_SetPriority
-                0x0000000008000d14       0x38 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
+                0x0000000008000d88       0x38 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
-                0x0000000008000d14                HAL_NVIC_SetPriority
+                0x0000000008000d88                HAL_NVIC_SetPriority
  .text.HAL_SYSTICK_Config
-                0x0000000008000d4c       0x18 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
+                0x0000000008000dc0       0x18 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
-                0x0000000008000d4c                HAL_SYSTICK_Config
+                0x0000000008000dc0                HAL_SYSTICK_Config
  .text.LL_InitTick
-                0x0000000008000d64       0x34 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
+                0x0000000008000dd8       0x34 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
  .text.LL_Init1msTick
-                0x0000000008000d98       0x18 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
+                0x0000000008000e0c       0x18 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
-                0x0000000008000d98                LL_Init1msTick
+                0x0000000008000e0c                LL_Init1msTick
  .text.LL_SetSystemCoreClock
-                0x0000000008000db0       0x20 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
+                0x0000000008000e24       0x20 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
-                0x0000000008000db0                LL_SetSystemCoreClock
+                0x0000000008000e24                LL_SetSystemCoreClock
  .text.__libc_init_array
-                0x0000000008000dd0       0x48 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m/fpv4-sp/hard\libc_nano.a(lib_a-init.o)
+                0x0000000008000e44       0x48 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m/fpv4-sp/hard\libc_nano.a(lib_a-init.o)
-                0x0000000008000dd0                __libc_init_array
+                0x0000000008000e44                __libc_init_array
  *(.glue_7)
- .glue_7        0x0000000008000e18        0x0 linker stubs
+ .glue_7        0x0000000008000e8c        0x0 linker stubs
  *(.glue_7t)
- .glue_7t       0x0000000008000e18        0x0 linker stubs
+ .glue_7t       0x0000000008000e8c        0x0 linker stubs
  *(.eh_frame)
- .eh_frame      0x0000000008000e18        0x0 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
+ .eh_frame      0x0000000008000e8c        0x0 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
  *(.init)
- .init          0x0000000008000e18        0x4 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crti.o
+ .init          0x0000000008000e8c        0x4 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crti.o
-                0x0000000008000e18                _init
+                0x0000000008000e8c                _init
- .init          0x0000000008000e1c        0x8 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtn.o
+ .init          0x0000000008000e90        0x8 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtn.o
  *(.fini)
- .fini          0x0000000008000e24        0x4 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crti.o
+ .fini          0x0000000008000e98        0x4 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crti.o
-                0x0000000008000e24                _fini
+                0x0000000008000e98                _fini
- .fini          0x0000000008000e28        0x8 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtn.o
+ .fini          0x0000000008000e9c        0x8 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtn.o
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
-                0x0000000008000e30                _etext = .
+                0x0000000008000ea4                _etext = .
 
-.vfp11_veneer   0x0000000008000e30        0x0
+.vfp11_veneer   0x0000000008000ea4        0x0
- .vfp11_veneer  0x0000000008000e30        0x0 linker stubs
+ .vfp11_veneer  0x0000000008000ea4        0x0 linker stubs
 
-.v4_bx          0x0000000008000e30        0x0
+.v4_bx          0x0000000008000ea4        0x0
- .v4_bx         0x0000000008000e30        0x0 linker stubs
+ .v4_bx         0x0000000008000ea4        0x0 linker stubs
 
-.iplt           0x0000000008000e30        0x0
+.iplt           0x0000000008000ea4        0x0
- .iplt          0x0000000008000e30        0x0 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
+ .iplt          0x0000000008000ea4        0x0 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
 
-.rel.dyn        0x0000000008000e30        0x0
+.rel.dyn        0x0000000008000ea4        0x0
- .rel.iplt      0x0000000008000e30        0x0 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
+ .rel.iplt      0x0000000008000ea4        0x0 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
 
-.rodata         0x0000000008000e30        0x0
+.rodata         0x0000000008000ea4        0x0
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
  *(.rodata)
  *(.rodata*)
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
 
-.ARM.extab      0x0000000008000e30        0x0
+.ARM.extab      0x0000000008000ea4        0x0
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
  *(.ARM.extab* .gnu.linkonce.armextab.*)
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
 
-.ARM            0x0000000008000e30        0x0
+.ARM            0x0000000008000ea4        0x0
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
-                0x0000000008000e30                __exidx_start = .
+                0x0000000008000ea4                __exidx_start = .
  *(.ARM.exidx*)
-                0x0000000008000e30                __exidx_end = .
+                0x0000000008000ea4                __exidx_end = .
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
 
-.preinit_array  0x0000000008000e30        0x0
+.preinit_array  0x0000000008000ea4        0x0
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
-                0x0000000008000e30                PROVIDE (__preinit_array_start = .)
+                0x0000000008000ea4                PROVIDE (__preinit_array_start = .)
  *(.preinit_array*)
-                0x0000000008000e30                PROVIDE (__preinit_array_end = .)
+                0x0000000008000ea4                PROVIDE (__preinit_array_end = .)
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
 
-.init_array     0x0000000008000e30        0x4
+.init_array     0x0000000008000ea4        0x4
-                0x0000000008000e30                . = ALIGN (0x4)
+                0x0000000008000ea4                . = ALIGN (0x4)
-                0x0000000008000e30                PROVIDE (__init_array_start = .)
+                0x0000000008000ea4                PROVIDE (__init_array_start = .)
  *(SORT_BY_NAME(.init_array.*))
  *(.init_array*)
- .init_array    0x0000000008000e30        0x4 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
+ .init_array    0x0000000008000ea4        0x4 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
-                0x0000000008000e34                PROVIDE (__init_array_end = .)
+                0x0000000008000ea8                PROVIDE (__init_array_end = .)
-                0x0000000008000e34                . = ALIGN (0x4)
+                0x0000000008000ea8                . = ALIGN (0x4)
 
-.fini_array     0x0000000008000e34        0x4
+.fini_array     0x0000000008000ea8        0x4
-                0x0000000008000e34                . = ALIGN (0x4)
+                0x0000000008000ea8                . = ALIGN (0x4)
                 [!provide]                        PROVIDE (__fini_array_start = .)
  *(SORT_BY_NAME(.fini_array.*))
  *(.fini_array*)
- .fini_array    0x0000000008000e34        0x4 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
+ .fini_array    0x0000000008000ea8        0x4 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
                 [!provide]                        PROVIDE (__fini_array_end = .)
-                0x0000000008000e38                . = ALIGN (0x4)
+                0x0000000008000eac                . = ALIGN (0x4)
-                0x0000000008000e38                _sidata = LOADADDR (.data)
+                0x0000000008000eac                _sidata = LOADADDR (.data)
 
-.data           0x0000000020000000       0x10 load address 0x0000000008000e38
+.data           0x0000000020000000        0xc load address 0x0000000008000eac
                 0x0000000020000000                . = ALIGN (0x4)
                 0x0000000020000000                _sdata = .
  *(.data)
  *(.data*)
- .data.expe     0x0000000020000000        0x1 Core/Src/main.o
-                0x0000000020000000                expe
- *fill*         0x0000000020000001        0x3 
  .data.SystemCoreClock
-                0x0000000020000004        0x4 Core/Src/system_stm32l4xx.o
+                0x0000000020000000        0x4 Core/Src/system_stm32l4xx.o
-                0x0000000020000004                SystemCoreClock
+                0x0000000020000000                SystemCoreClock
  .data.uwTickPrio
-                0x0000000020000008        0x4 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
+                0x0000000020000004        0x4 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
-                0x0000000020000008                uwTickPrio
+                0x0000000020000004                uwTickPrio
  .data.uwTickFreq
-                0x000000002000000c        0x1 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
+                0x0000000020000008        0x1 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
-                0x000000002000000c                uwTickFreq
+                0x0000000020000008                uwTickFreq
-                0x0000000020000010                . = ALIGN (0x4)
+                0x000000002000000c                . = ALIGN (0x4)
- *fill*         0x000000002000000d        0x3 
+ *fill*         0x0000000020000009        0x3 
-                0x0000000020000010                _edata = .
+                0x000000002000000c                _edata = .
 
-.igot.plt       0x0000000020000010        0x0 load address 0x0000000008000e48
+.igot.plt       0x000000002000000c        0x0 load address 0x0000000008000eb8
- .igot.plt      0x0000000020000010        0x0 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
+ .igot.plt      0x000000002000000c        0x0 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
-                0x0000000020000010                . = ALIGN (0x4)
+                0x000000002000000c                . = ALIGN (0x4)
 
-.bss            0x0000000020000010       0x24 load address 0x0000000008000e48
+.bss            0x000000002000000c       0x24 load address 0x0000000008000eb8
-                0x0000000020000010                _sbss = .
+                0x000000002000000c                _sbss = .
-                0x0000000020000010                __bss_start__ = _sbss
+                0x000000002000000c                __bss_start__ = _sbss
  *(.bss)
- .bss           0x0000000020000010       0x1c c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
+ .bss           0x000000002000000c       0x1c c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtbegin.o
  *(.bss*)
- .bss.msTicks   0x000000002000002c        0x4 Core/Src/main.o
+ .bss.msTicks   0x0000000020000028        0x4 Core/Src/main.o
-                0x000000002000002c                msTicks
+                0x0000000020000028                msTicks
+ .bss.expe      0x000000002000002c        0x1 Core/Src/main.o
+                0x000000002000002c                expe
  .bss.blue_mode
-                0x0000000020000030        0x1 Core/Src/main.o
+                0x000000002000002d        0x1 Core/Src/main.o
-                0x0000000020000030                blue_mode
+                0x000000002000002d                blue_mode
  *(COMMON)
-                0x0000000020000034                . = ALIGN (0x4)
+                0x0000000020000030                . = ALIGN (0x4)
- *fill*         0x0000000020000031        0x3 
+ *fill*         0x000000002000002e        0x2 
-                0x0000000020000034                _ebss = .
+                0x0000000020000030                _ebss = .
-                0x0000000020000034                __bss_end__ = _ebss
+                0x0000000020000030                __bss_end__ = _ebss
 
 ._user_heap_stack
-                0x0000000020000034      0x604 load address 0x0000000008000e48
+                0x0000000020000030      0x600 load address 0x0000000008000eb8
-                0x0000000020000038                . = ALIGN (0x8)
+                0x0000000020000030                . = ALIGN (0x8)
- *fill*         0x0000000020000034        0x4 
                 [!provide]                        PROVIDE (end = .)
-                0x0000000020000038                PROVIDE (_end = .)
+                0x0000000020000030                PROVIDE (_end = .)
-                0x0000000020000238                . = (. + _Min_Heap_Size)
+                0x0000000020000230                . = (. + _Min_Heap_Size)
- *fill*         0x0000000020000038      0x200 
+ *fill*         0x0000000020000030      0x200 
-                0x0000000020000638                . = (. + _Min_Stack_Size)
+                0x0000000020000630                . = (. + _Min_Stack_Size)
- *fill*         0x0000000020000238      0x400 
+ *fill*         0x0000000020000230      0x400 
-                0x0000000020000638                . = ALIGN (0x8)
+                0x0000000020000630                . = ALIGN (0x8)
 
 /DISCARD/
  libc.a(*)
@@ -3862,15 +3860,15 @@ LOAD c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.exte
                 0x000000000000023a       0x22 c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7e-m/fpv4-sp/hard/crtn.o
 OUTPUT(RealOne.elf elf32-littlearm)
 
-.debug_info     0x0000000000000000     0x4920
+.debug_info     0x0000000000000000     0x4bd6
  .debug_info    0x0000000000000000      0x84a Core/Src/gpio.o
- .debug_info    0x000000000000084a      0xd0e Core/Src/main.o
+ .debug_info    0x000000000000084a      0xfc4 Core/Src/main.o
- .debug_info    0x0000000000001558      0x35e Core/Src/stm32l4xx_it.o
+ .debug_info    0x000000000000180e      0x35e Core/Src/stm32l4xx_it.o
- .debug_info    0x00000000000018b6      0x727 Core/Src/system_stm32l4xx.o
+ .debug_info    0x0000000000001b6c      0x727 Core/Src/system_stm32l4xx.o
- .debug_info    0x0000000000001fdd       0x22 Core/Startup/startup_stm32l476rgtx.o
+ .debug_info    0x0000000000002293       0x22 Core/Startup/startup_stm32l476rgtx.o
- .debug_info    0x0000000000001fff      0xc20 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
+ .debug_info    0x00000000000022b5      0xc20 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
- .debug_info    0x0000000000002c1f      0xf6d Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
+ .debug_info    0x0000000000002ed5      0xf6d Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
- .debug_info    0x0000000000003b8c      0xd94 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
+ .debug_info    0x0000000000003e42      0xd94 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
 
 .debug_abbrev   0x0000000000000000      0xd51
  .debug_abbrev  0x0000000000000000      0x233 Core/Src/gpio.o
@@ -3968,32 +3966,32 @@ OUTPUT(RealOne.elf elf32-littlearm)
  .debug_macro   0x0000000000025ffb      0x29b Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
  .debug_macro   0x0000000000026296       0xa1 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
 
-.debug_line     0x0000000000000000     0x40e6
+.debug_line     0x0000000000000000     0x40fa
  .debug_line    0x0000000000000000      0x7e6 Core/Src/gpio.o
- .debug_line    0x00000000000007e6      0xacc Core/Src/main.o
+ .debug_line    0x00000000000007e6      0xae0 Core/Src/main.o
- .debug_line    0x00000000000012b2      0x855 Core/Src/stm32l4xx_it.o
+ .debug_line    0x00000000000012c6      0x855 Core/Src/stm32l4xx_it.o
- .debug_line    0x0000000000001b07      0x6eb Core/Src/system_stm32l4xx.o
+ .debug_line    0x0000000000001b1b      0x6eb Core/Src/system_stm32l4xx.o
- .debug_line    0x00000000000021f2       0x87 Core/Startup/startup_stm32l476rgtx.o
+ .debug_line    0x0000000000002206       0x87 Core/Startup/startup_stm32l476rgtx.o
- .debug_line    0x0000000000002279      0x961 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
+ .debug_line    0x000000000000228d      0x961 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
- .debug_line    0x0000000000002bda      0x9e9 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
+ .debug_line    0x0000000000002bee      0x9e9 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
- .debug_line    0x00000000000035c3      0xb23 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
+ .debug_line    0x00000000000035d7      0xb23 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
 
-.debug_str      0x0000000000000000    0xee792
+.debug_str      0x0000000000000000    0xee8c5
  .debug_str     0x0000000000000000    0xe3d91 Core/Src/gpio.o
                                       0xe4dab (size before relaxing)
- .debug_str     0x00000000000e3d91     0x8d43 Core/Src/main.o
+ .debug_str     0x00000000000e3d91     0x8e76 Core/Src/main.o
-                                      0xed98d (size before relaxing)
+                                      0xedac0 (size before relaxing)
- .debug_str     0x00000000000ecad4       0xad Core/Src/stm32l4xx_it.o
+ .debug_str     0x00000000000ecc07       0xad Core/Src/stm32l4xx_it.o
                                       0xed404 (size before relaxing)
- .debug_str     0x00000000000ecb81       0x79 Core/Src/system_stm32l4xx.o
+ .debug_str     0x00000000000eccb4       0x79 Core/Src/system_stm32l4xx.o
                                       0xe3959 (size before relaxing)
- .debug_str     0x00000000000ecbfa       0x36 Core/Startup/startup_stm32l476rgtx.o
+ .debug_str     0x00000000000ecd2d       0x36 Core/Startup/startup_stm32l476rgtx.o
                                          0x62 (size before relaxing)
- .debug_str     0x00000000000ecc30      0x9fa Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
+ .debug_str     0x00000000000ecd63      0x9fa Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o
                                       0xe443d (size before relaxing)
- .debug_str     0x00000000000ed62a      0x3a6 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
+ .debug_str     0x00000000000ed75d      0x3a6 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o
                                       0xe41ad (size before relaxing)
- .debug_str     0x00000000000ed9d0      0xdc2 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
+ .debug_str     0x00000000000edb03      0xdc2 Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.o
                                       0xea58d (size before relaxing)
 
 .comment        0x0000000000000000       0x7b